How to remove glue from the tape. How to remove traces from tape, would not damage the surface? We derive traces from the tape with soap solution

It is necessary to take into account the type of surface to which the tape is glued.

After scotch, there were ugly traces? Scraping the blade did not give results - stickiness remained, but the scratches appeared? It is terrible to use the sticky tape, because it is not known how to remove traces from Scotch? But acrylic glue, which covers adhesive tape, it is simply washed, and with a variety of materials.

Best tools

Oils - vegetable, including olive, ethereal (tea tree, citrus, menthol).
Alcohols are medical, ammonia, vodka.
Gasoline solvent, or White spirit, varnish removal fluid.
Cleaning powders with abrasive, food soda.
Gasoline for refueling lighters.
Antistatic, acetone, detergents "Mr. Muskul", "Mr. Propher".
Soap solution, turpentine.

How to delete?

Plastic

Traces of glue on plastic are removed using oils. Essential oils Violate chemical bonds that are responsible for the stickiness of the substance. They wet the sponges and leave on the spot. In 10 minutes the glue will swell. Then the surface is wiped with a paper napkin.

Apply medical alcohol. Liquid wet your cotton swab or a piece of fabric and try to drop the dirt.

There are many varieties of plastic. Some brands are afraid of sleep-containing substances. Therefore, first spend a test for stability.

The safest method is a soap solution. In water bred a little liquid soap, foam, applied to glue, leave for a few minutes. Because the remnants of the adhesive tape are removed.

Furniture

The oil will make it possible to clean from the scotch any polished or painted surface.

The lacquered facade is treated with gasoline or White spirit. But after these substances sometimes remain. Apply oils - by the same scheme as for plastic. You can also try soap solution.

If the apartment has furniture made of natural nonlackated wood, then for it, special caring chemicals are used, as well as white spirit, gasoline, lacquer removal fluid. It is impossible to clean the tree with fats, since this method does not bring results, leaves dark spots.

Glass

You can remove tape from glass using vegetable oil, vinegar, alcohol, acetone or white alcohol.

Previously, the mistresses were insulated on the winter window with a paper strip with a hubble. This is a rather time-consuming procedure, so the window scotch came up with, the application of which takes a few minutes. But to clean it from glass - still the problem. All of the above substances are suitable for its solution, since the glass does not interact with chemical compounds. The material is quite solid, therefore abrasives can be applied.

Another thing - matte glass that are installed in door canvas. For such a surface, the detergents for the purification of glasses are suitable, but with alcohol in the composition, as well as acetone, ammonia. Alternatively, resort to the help of steam mop.

With plastic windows

On plastic windows rubbing the scotch drinking soda, diluted to the casczyce state water. The substance is applied to a sponge or piece of fabric and wipe the contaminated place. Effective White spirit or gasoline for lighters.

How to wash windows from Scotch:

the cloth

At the upholstery soft furnitureAcetone will cope with pollution with pollution. Upholstery wipes a chemical. Then a piece of pure fabric is wetted in the soap solution, wipe the processed place and dried with dry rags, paper. Before using acetone, make sure that the remedy does not wash the dye.

Leather

This is extremely delicate material. The skin does not tolerate gasoline, acetone, solvents on a basis, otherwise the product will be spoiled. The optimal option is to use dry cleaning services. If there is no such possibility, you prepare a soap solution, which adds a few drops of the ammonia (concentration - 10%). After washing and rinsing the surface is impregnated with cream.

Body car

The dishwashing detergent will help remove fat, which is nalized on the traces of Scotch.

Such traces are usually left after participating in the wedding contention when the body is decorated with floral garlands. The White Spirit, gasoline has proven well. But the oil leaves unsightly traces.

The video demonstrates the removal of the scotch from the car with a drill:

Scotch and Eraser against Scotch

This method is suitable when scotch pieces remained. Then the new ribbon is imposed on top of the old and sharply shake up the top layer. In thought, old layer It remains in the new. If necessary, repeat the procedure repeatedly.

The multifunctional stationery eraser will help and in the case of glue. It is enough to walk along the stain of the erasing rubber, and the remaining traces wipe the dry soft textiles. This method is suitable for almost all monophonic solids. If the stain appeared on the subject with a thin layer of paintwork, it is important to make sure that the paint will not be erased with glue.

Cleaning rules

Try to remove traces from Scotch immediately after they are detected.

Facilitate the task heating glue with hot air from the hair dryer if the material is resistant to high temperatures. Warm air Heat the remains of sticky tape, remove pieces, if they remained, and wipe the place to the means that suits this type of material. Hair dryer helps against bilateral scotch, which fastens more powerful.

When nothing of the above funds helps, the store buy a special means of household chemicals "to remove labels". This will be a real find for the care of the shop window, where it is necessary to clean the inventory and furniture sometimes several times a day. The use method is simple: the liquid is sprayed onto the surface with glue, wipes with a damp cloth.

To make it easier to rub sticky traces, you should use the tape for temporary bonding - the greasy, the leukoplasty, especially when it comes to the car body.

It is better to get rid of fresh traces. Forged and dried glue delivers more trouble. Before using the cleaner, familiarize yourself with the peculiarity of the product care. So, after fats, stains remain on the fabric, which are also not easy to bring. But even if there is no warning, it is recommended to check the method on a separate area before conducting the procedure, preferably hidden from the eyes.

Adhesive tape, or scotch, as most people call it, is one of the most popular temporary fixation methods. But after removing the adhesive tape from the plastic surface, the question may arise, what to wash the glue from the tape from the plastic. " Back side»Wonderful properties Scotch often are sticky glue bands that remain after removing the tape. The sticky stripe quickly draws, covered with mud, and even a thin layer is hard enough. The editorial board will come to the rescue and will reveal all the subtleties removal of a hated adhesive trail with plastic.

No wonder many crimes open immediately "hot wakes". With the adhesive strip from the tape the same story - the faster the tape from the plastic will be, the easier it will be. Consider the main ways.

How to Clean Scotch from Plastic Sticking Strips of New Scotch

This option can work if unstable. The principle and sequence of actions are the most simple as possible: we reach from the roll with a scotch bar of the desired length, press to the place, smooth, we ride sharply. Start on the adhesive tape, if everything is done correctly. But, most likely, part of the glue will remain on the spot, and will have to apply the following.

How to tip the tape from plastic with a cloth moistened in hot water

If there is enough time in stock, you can drop the adhesive spot with a tissue dipped in warm water. To do this, you need to wet the rag, press it at the time to the place when the adhesive layer soften, linse the surface. It will take about 5-8 minutes.

Mechanical removal of traces of Scotch Stationery

A good liquidation means will be able to serve as a stationery eraser. In the case when the glue is still slightly, this method is fits bad, because The substance sticks partially to the eraser. It can erase glue from plastic traces as well as a pencil from pages. It will be necessary to apply an effort to achieve the desired result.

Therefore, gentle female hands may not drop the mud to the end. If the surface is large, use a drill on unprecedented revolutions with a special nozzle.

Article on the topic:

: folk ways and special means. Dirt removal options from specific pollution: dirt spots, paints, whitewings, mounting foam, glue, primer, lime and cement - in our publication.

Than from the primary means to wash the solar traces from the tape on the plastic

It is much more difficult to get rid of the adversal adhesive basis. But there is nothing impossible here. You only need to select a suitable way and tool.

How to remove traces from tape on plastic vegetable oil and alcohol

It is suitable vegetable oil from any raw materials (seeds or olives), which at this time is present in the kitchen. Wetted with an oil napkin leaves on top of the stains for several hours, during this gap it will reduce the adhesion of the adhesive substance. After it is enough to wipe the plastic with a wet towel to erase the remnants. Soap solution is used to remove the bold layer. You can cook it using a washing powder, soap or dishes.

Ethyl and ammonia alcohol refers to more aggressive means. Therefore, before applying them for, it is worth checking the reaction of the material on a hidden area from the eyes. It is impossible to use alcohol on the painted surface, because How it will remove the paint layer. To remove some alcohol on the trails of adhesive tape (you can easily rub). Once the glue is removed, wipe with a napkin or flaple fabric.

How to wash the tape with casic soda from the plastic

Measuring Torust food Soda (on the eye), you need to mix it with a small amount of water to the creamy mass.

This cleaner is applied to the surface with. Soda performs in a mixture by abrasive, which can easily cope with the stain. If after processing there were still traces of glue, you should repeat the "Event" again. After wing the place of treatment with a damp cloth, and then wipe dry.

Than from chemical means linen glue from tape

Powder products, gasoline - all this will help in the fight against adhesive trail on plastic.

Means for washing windows. The substances contained in the composition of funds, different manufacturers firms, perfectly will be perfectly solely with traces of adhesive tape. To clean the surface you need:

Spray liquid on.
Give five minutes to softening the sticky substance.
Loose glue from the surface.

Powder products. Very carefully apply this method to plastic plastic. If it is not sufficiently resistant to mechanical influences, then you do not need to rub the products with powder. To remove dirt, perform the following actions:

Wet sponge dip in powder.
Press the sponge to the spot for 5-10 minutes.
Caution, carefully proceed to cleaning.
When driving a sponge to rinse in water.

Attention! Use this method only for plastics resistant to mechanical stress.

If we decided to use gasoline, it is better to take the one that for lighters (it is less aggressive and quickly evaporates), but if not, it will come true and the usual car. Perfectly clean pollution. Carry out manipulation with gasoline better on open air Or in a well-ventilated room, away from an open source of fire.

Funds are applied point so as not to damage the surface structure. Pour on plastic, and even more so soak it in aggressive substances it is impossible, the surface can be deformed. It also applies to solvents that will be mentioned below.

Article on the topic:

: water, household chemicals, folk recipes, miracle napkin microfiber; how to wash compound pollution from mirrors limescale, from stickers and markers - read the publication.

How to wash the traces of Scotch White spirit and acetone

Solvents. For example, White spirit or acetone is likely to have in every home. They cope with the purification of plastics.

It is impossible to carry out the processing of painted surfaces with acetone, because It corps paint. An action algorithm when working with solvents or acetone is simple, it consists of three points:

First we wat the solvents of the rag.
With the help of the vehicle, we remove to its complete disappearance.
We wipe the place of treatment with an important cloth.

How to remove traces from the tape with food vinegar and ammonia alcohol

The ammonia alcohol is another means to remove traces from the place of stay of Scotch. Before applying, it is worth checking on a plot hidden from the eyes, how stable the material to it.

Applying funds for the subject, you should lose a slight spot, after cleaning with a wet cloth.

Than from specialized funds you can remove traces from tape from plastic

The market is now ready to offer a large assortment of funds against such, based on the complexity and financial capabilities of the buyer.

Even a line of means for cleaning and removing glue, which remained after an unsuccessful procedure. There are some general recommendations To work with special means:

You need to know that almost all formulations are very aggressive. It is advisable to avoid contact with skin cover. Therefore, before removing glue from the tape, you need to wear rubber gloves.
Sprayed, and some funds are applied to the surface or sponge. After embarking on cleaning. Processing advise only that site that is designed by glue.
From time to time it is worth riding a sponge. The adhesive particles will be removed from the abrasive layer. If this is not done, it will be bored with glue, and will not clean the surface.
On the last stage Clean the adhesive particles scattered in the coils. Wipe plastic with a damp cloth.

How to Clean the surface of plastic to the antiskotch means

The tool is suitable for painted surfaces. The principle of operation is as simple as possible. But should observe precautions when working with a substance:

Apply with a sponge or tampon to the surface.
Leave for 10-15 seconds.
Wipe with a dry cloth.

How to Clean Plastic tools to remove glue traces and universal aerosol cleaners

First of all, you need to explore the instructions of a particular means. Find out if the substance of the surface that needs to be cleaned. It is advisable to apply or spray the tool first on the hidden area. If defects have not appeared, it can be applied to a wide surface. Some funds can only be used at invisible places.

After working with the means containing aggressive substances, it is recommended. Is explained by the fact that in the air is a large number of Volatile compounds that can harm human health. Plastic can lose the shade if it is old and lost color, and the use of aggressive substances led to bleaching. Usually recommended to make the entire surface of white.

The better laundering bilateral scotch

Already several times it was said that it was necessary to clean the plastic very carefully. This is due to the fact that the material is very poorly tolerates the effect of aggressive substances.

Double-sided adhesion to delete is as much as possible. Her hairdryer will help. The second way requires to do it through the substrate, because With direct contact with a hot-sole iron surface may be damaged, therefore, before removing the double-sided tape with plastic, read the small instruction:

The plot to be cleaned should be heated by any convenient way.
Using a stupid knife or rubber spatula, the substance believes.
Laps of glue, which are poorly removed, can be cleaned in the ways listed above.

The better wash the tape from the plastic window

If the previous ways did not work and you still need to know how to remove bilateral tape from plastic, look at the following methods:

Having understood what glue from the tape can not be afraid and use such a universal "fastener" in an unlimited quantity. After all, as popular wisdom says, "if it didn't work out something to scratch well, it means that they took little Scotch."

Article

September 17, 2016
Specialization: finishing facades, interior decoration, construction of cottages, garages. Experience and gardener and gardener experience. There is also experience in repairing cars and motorcycles. Hobbies: the game is not a guitar and a lot more, to which there is not enough time :)

Often, the homemade masters during the repair closes the frames or even glass, sticking tape on them. This solution allows you to protect the window from pollution, however, over time, remove the tape and even more so the remnants of the glue after it is not easy. To help in solving this task, then I will tell you how to remove the scotch with plastic windows The most efficient people's ways.

Folk ways to remove scotch

First of all, I must say that the longer the scotch will be on the windows, the more difficult to get rid of it. And as soon as you break it, do not leave "for later" cleaning surface from glue. The fact is that glue takes on and will look like dark spots, moreover, over time, delete it becomes only more difficult, which I understood from personal experience.

There are many all kinds of folk tricks to remove adhesive tape, however, the following methods are checked and most effective:

Method 1: Stationery Eraser

Eraser is able to erase with a frame or glass residues of adhesive tape and glue as well as a pencil with paper. The only, gum should be new and preferably as much elastic.

It should be noted that eraser is able to cope even with very old traces of Scotch. However, this method has one serious disadvantage - if the pollution area is large, it turns into a long and quite laborious work.

Therefore, it is advisable to use the eraser only in cases where the plot is small in the area. Otherwise, consider the other, more optimal option How to remove old scotch.

Method 2: Scraper

If the adhesive tape was glued to the window relatively recently, it is possible to remove it with a scraper for cleaning glass and ceramic surfaces. Working with this adaptation is as follows:

with the help of a scraper, you will find the edge of the tape;
next, pull the edge. If you feel that the film began to rush, let it easily;
after removing the tape, the ledge of glue should be scraped as a scraper, as far as possible;
if necessary, additionally wipe the surface of the window with a detergent. Let us consider more detail how to wash off the remnants of glue.

The hostesses often get rid of the tape and glue residues with the blade. This method is also effective, however, it is necessary to work with the blade very carefully so as not to scratch the plastic and do not cut yourself. It is advisable to use it only for cleaning the glasses.

Method 3: Household Hairdryer

A great way to clean the windows from the old scotch is to warm up the contaminated areas are common for hair. This is done as follows:

evenly warp the contaminated area, as a result of which the glue softened;
next, rub the contaminated area with a cloth or paper towel, you can also use the scraper if necessary. For achievement best resultUse detergent. In the process of work, the polluted area must be moderated periodically.

If you have a steam generator, then it is better to use it, as it copes it more effectively with the task than a hairdryer.

The advantage of this method is that it allows you to remove adhesive even in plastic. In addition, in this way, you can even remove traces of two-way tape, which in addition to acrylic in its adhesive composition contains rubber and other components, "tight" enchanting in plastic and other surfaces.

Method 4: vegetable oil

Another common and effective tool - It is vegetable oil. Moreover, the oil can use any - sunflower, mint, etc. The surface cleaning process in this case looks like this:

before cleaning the tape from the plastic window, you need to lubricate contaminated areas with oil;
for an hour, periodically rub polluted places with a cotton swab;
when tape and traces from it will be completely removed, it is necessary to wash the oil from the surface. To do this, you can use the detergent for dishes.

The smell of oil for some time will be felt in the room even after you wash it. Therefore, use better oil that smells pleasantly. For example, an excellent option is essential citrus oil.

Option 5: Medical Alcohol

Now consider how to wash the tape from plastic windows with medical alcohol. For this we need 95 percent alcohol.

I must say that in this way you can not only remove glue into the plastic surface, but also whiten the yellowed plastic. The procedure is performed in such a sequence:

apply alcohol on a polluted surface with a cotton swab. As the alcohol dry, it should be applied within a few minutes;
then pay the contaminated areas in the same tampon.

Initially, try alcohol on little plot plastic because plastic of different types and density can respond differently on the impact of alcohol.

I note that when I had to rub the glue from the windows, the alcohol was not at hand. However, I used toilet water and a paper towel. As a result, it turned out to quickly clear the large sections with traces of adhesive tape.

Option 6: adhesive tape

As folk wisdom says, "wedge wedge is embroodble." If it is a little paraphrase under our situation, it turns out that the scotch can be kept with scotch. Instructions in this case are extremely simple and understandable:

on the plots with the old adhesive tape and glue, stick a new strip of tape;
now the new ribbon needs to be trimmed with one sharp jerk;
if the first time it did not work completely clean the surface from, repeat the procedure again.

It is advisable to start cleaning the surface from this method, and then think about how to rain the remains of the adhesive tape, which could not be removed by the scotch.

Option 7: Wedge for removing varnish or other solvent

If you need to clean the window glass, then for this you can use the lacquer removal means, white spirit or another solvent. The main thing - perform work carefully so that the solvent does not hit the plastic, as it can damage it.

Solvent work is very simple - first treat with liquid contaminated sections, then wait a few minutes and wipe the glass with a clean cloth or paper towel. The only thing to ensure the air ventilation, since all solvents have a sharp toxic smell.

Option 8: Special cleaners

Currently, there are quite a few special compositions that allow you to get rid of not only from the tape and its traces, but also other all sorts of stickers. As an example, consider HG Sticker Remover.

This composition is applied as follows:

if you have not yet removed the adhesive tape from the glass, and they found out that it is difficult to do it, as it rushes, then in this case, before cleaning the plastic windows from the scotch, hide the scotchi seals. The plot under the torn ribbon should be lubricated by this composition;
after a few minutes, pull the tape and gently take it off the window. If it breaks on some plot, the procedure must be repeated;
after that, apply the composition to the remnants of glue with a cotton swab, and wait a few seconds until it reaches the surface;
now the surface can be wiped with a clean cloth or paper towel.

The price of this means is about 400 rubles per bubble capacity of 300 ml. This volume is enough to rain all windows in the apartment, and the composition will remain for other cases.

Of course, there are many other detergents that are effectively coping with the task. In particular, Fenosol and Cosmofen 10 were proven well. They are used on the same principle - before laundering polluted areas, they are applied to them, after which the surface is removed.

Output

All methods for removing the scotch with plastic windows, with which they familiarized themselves above are quite effective. Therefore, it should be chosen depending on the area of \u200b\u200bthe polluted surface and its type, i.e. Glass dirty or plastic. At the same time, work carefully so as not to damage the surface of the windows.

Additional information contains video in this article. If you have any difficulties in the process of removing Scotch, ask questions in the comments, and I will gladly answer you.

September 17, 2016.

If you want to express your gratitude, add clarification or objection to ask the author - add a comment or tell me thanks!

We are all familiar with so unique and useful aneglike scotch. Invented it in the 19th century, but since then the sphere of its use only expanded. It is not surprising, because both types of adhesive tape have become much larger than: raw, stationery, assembly, bilateral. In addition to the wonderful properties, the scotch is attached to themselves. If the tape dug himself, traces remain on the surface, which are very difficult to drop. Dust sits on them and over time the glue stains become similar to a small monster of a bad cartoon.

Why the stationery, greasy and other types of scotch leave traces

Of whatever scotch is made: paper, fabrics or rubber, the composition of the glue caused by the tape remains the same. The glue is made on the basis of acrylic or rubber. So, in order to put furniture or other surfaces in order, it is necessary to take care of means capable of dissolving these substances.

In addition to such a composition, the traces affect the ability of glue to absorb into objects. What makes how easy it will be easy to clean?

From the surface structure. Consisting of loose substances The coating is difficult to cleaned from glue.
From the time of contact. The longer the glue borders with the surface, the better the glue absorbs.

So that in the future it was easier for us to deal with cleaning, let's see what types of scotch exist. And what adhesive feature is distinguished.

Stationery - acrylic glue;
Malyary (paper or crepe) - rubber;
Mounting (construction), including bilateral - acrylic glue;
Bilateral assembly tape on the foam basis (issued different colors) - acrylic or rubber.

Rubber glue is easily removed from the surfaces, especially if the scotch has been removed recently. It should be just removed by hand. Here, possibly additional cleansing and will not need. The main qualities of rubber-based glue are elasticity and waterproof. Traces from tape with adhesive coating from acrylic will require effort. Since rubber and acrylic are not suitable in composition, then the methods of cleaning them differ.

Cleaning glue prints from glass

Let's start by S. solvents. It is not necessary to immediately go to the construction store. It is enough to use gasoline. Ordinary household gasoline or one that is used to refuel lighters in small quantity Applied to a sponge or cloth. We wipe as glue divorces. The residues of the solvent are cleaned with soap solution and wipe the glass dry. Instead of gasoline, you can use the "White Spirit" or Skipidar.

When cleaning the glass solvents need to remember that they all have sharp odors. So, the room should be well ventilated during cleaning and after it. If the street is cold season, it is possible to think about other ways.

Such products of the chemical industry as solvent or kerosene are used as detergent. We put a little on the sponge and remove the glue with glass surface. These two substances are perfectly dissolved rubber chemical compounds.

With adhesive coating based on acrylic solvents containing oil elements, do not cope.

Alcohol formulations Clean the glass surface literally in two scores. You can use medical (ethyl) alcohol, technical (methyl) and alcohol-containing products (vodka, lotion, cologne). Sponge or cloth are abundantly wetted in alcohol. Then we apply glue to the trails and press. Fix to withstand the time 10-15 minutes. We wash with a dry clean cloth.

Another effective method get rid of glue on glass it is melamine sponge. What it is? This is a high-quality and inexpensive analogue of a foam sponge. But the structure presents the so-called melamine foam. It is produced by special technology Pumping the melamine resin. Melamine itself is weakly soluble colorless crystals. Although the sponge refers to abrasive means, it is possible to use it when washing the glass, since due to the soft texture does not scratch the surface and leaves no traces. The melamine sponge needs to wet, squeeze to a wet state and how to lose a dirty place.

The following are funds that contain alkali. It can be gels for cleaning ceramics and plumbing, dishwashing agents with surfactants. In small quantities we apply to the sponge. Exciting efforts, rub glue stains.

Important! When using chemicals with a high chic content, we definitely protect the skin of the hands with rubber gloves!

Caustic or caustic soda. We will talk about it separately, although we include it to alkaline cleaners. This is the strongest pitch. It has the kind of scaly granules white color. She has no smell, which allows people with allergies to use caustic. We produce it in solid and liquid form. But in order not to leave scratches on the glass, choose the second option. This tool corps fat and organic compounds, easily copes with any synthetic materials. When contacting with the surface, the caustic soda begins to heat it. To take advantage of it for cleaning glass, put on thick rubber gloves. Several drops apply to the sponge and rub the glue within a few seconds. Footprints caustic are purged with plenty of water.

Important! This substance is dangerous, working with it you need to use gloves and glasses. It is necessary to apply it and wash it quickly, as caustic slowly disrupts even enameled coatings. It has strong devastating properties. May Dane aluminum and zinc. In addition, the caustic soda is explosive, it is related to flammable materials with an increased level of danger.

Effectively relieve a mirror or glass from glue spots ordinary acetone. You can use the lacquer removal fluid, most importantly, make sure the absence on the inscription bubble: "Without acetone". The liquid without the content of acetone consists of water, butyl acetate and propylene glycol. It will not remove traces from Scotch, only ruptures the manicure. But back to acetone. Introduce your cotton disk or with a solution with a solution and carefully wipe pollution on a glass surface. Previously, our manicure will not suffer, wear rubber gloves.

You can not clean glass or mirror with abrasive means. Scratches will remain on the surface.
Sunflower oil, despite its popularity, does not save the window from glue. Under the influence of sunlight glue is deeply entrusted to the texture. Oil only softens the top layer, not penetrating inside the adhesive path, and it is not completely removed.
Although laundry soap It contains pitch, it will definitely not cleaned the traces of Scotch. Like oil, it works with upper layers of dirt, without destroying acrylic and rubber.

We remove traces of tape from furniture and carpet.

It doesn't matter how this trace remained on the material. Maybe moving from one city to another. Or when buying things in the store Consultants managed to plant the price tag on Scotch. The main thing is how to return the fabric worthy view.

It is impossible to use sunflower oil, gasoline and kerosene in this case. Substances will leave fat stains. It is much more difficult to deal with them than with the traces of Scotch.

The faithful assistant in the purification of the upholstery will be "White Spirit" or Skipidar. So that the furniture or carpet is not injured, dilute solvent Water in a 1: 1 ratio. We have a gentle solution. The cloth moistened in this liquid, gently wipe the location of the pollution. If the furniture is leather, it is better to take advantage of the foam sponge so as not to scratch the surface. After cleansing, we pass on the upholstery with a damp cloth and give dry.

The stationery eraser will come in handy when cleaning any furniture. He has no restrictions on materials, temperature regimes. It does not injure the fabric. It is also necessary to use it, as if we were erased in a conventional notebook. After cleaning up the upholstery, we pass at the place of the vacuum cleaner to remove small fragrances.

How can you wash the stains on clothes

Do not melting natural and fabrics can be cleaned with an adhesive tape with alcohol or acetone. Impregnate with a solution with a cotton disk and rub the stain. This option cannot be used for tissues with a print, painted and thin materials.
Machine clothes in soap solution or water with the addition of washing powder. Let's stand 30-60 minutes. Thoroughly we carry out manually traces of the tape.
Customize machine machine for suitable for fabric mode. We add washing powder and load linen. Pressing function, if available, turn off to accurately believe that there are no traces of glue on the fabric.
Dissolve soda B. hot water. Machine a thing for 30-60 minutes. We carry out the pollution places, as you should be repaired.

Gasoline and kerosene leave persistent fatty stains on the tissues, so they are categorically impossible to remove traces of glue from clothing.

Household appliances will take again

Perhaps it becomes due to solutions that every day come across our eyes. This is a vinegar, detergent for brakes, acetone and alcohol. How to use the last two means we have already told. Cherry has come table vinegar. The solution is perhaps one of the secure means. But since it is an acid, rubber gloves are nearing. Welcome soft cloth in vinegar and rub the surface of the refrigerator, microwave or other metal. In addition to the fact that the acid will punish tracks, it will help to get rid of the remaining sticky particles of bilateral scotch. Moreover, vinegar will not leave white divorces on any metal surface.

Oddly enough, but the means for washing windows will come in handy to us for cleaning metal items from the traces of Scotch. It becomes more careful with the technique than vinegar. We apply on a wet soft cloth and carefully wipe pollution. After that, we go through the surface with a dry napkin.

We put things from plastic

Well, it's just not very difficult. Almost all cleaning agents are applicable to plastic subjects. Even sunflower oil. Suffoil the brush (better if it is from a pile, not silicone) into the oil. And miss the traces. Let's stand up half an hour. During this time, the glue changes its properties, softened. And removed with a sponge or cloth. For linoleum you can use eraser.

When cleaning plastic, it is not necessary to use gasoline capable of leaving light spots. Can not be used caustic and hairdryer, as if plastic Product Not qualitative, it may be swore.

In addition, remove tape trails helps hydrogen peroxide. Abundantly wet the surface. We are waiting for a few seconds and a plastic scraper (or an old credit card) quickly consider glue. Remove the peroxide remove the damp sponge.

On colored low-quality plastics due to hydrogen peroxide, white spots may form.

Four products for wooden surfaces

Sliding wardrobes from chipboard, laminate and table from natural tree. Oil, eraser, "Pinen" apply to all these materials - unlike the "White Spirit" does not have a sharp and unpleasant odor. But in detail we will focus on a fairly non-standard way, I was not dessert for dessert. We will use a hairdryer. Hair dryer for drying hair that has every girl. Of course, the hairdryer itself is not a cleaner. It only prepares the glue to the removal of other cleaning agents. With the help of a hair dryer, the adhesive substance softens, becomes more viscous. We remind you that you need to use hot drying mode. After that, remove the tape trail is one of the above methods.

How to wash with painted walls or wallpaper.

Destroy the dirty traces of adhesive on the walls are best "dry" methods - at a minimum using liquids. If Fliselinov Wallpaper and water-emulsion paint Moisture is not terrible, it is impossible to say about paper attributes. We wash the traces of a wet (almost dry) melamine sponge or eraser. Most likely, the glue forms katovka, they can be brushed to the clothes with a soft bristle.

If the glue hit the rubber

We use weak alcohol solvents or washing agents. Scraping such traces with a knife or blade should not be definitely. You can go through a contaminated surface. soda mortarBut in no way use caustics. After all, then there will be no trace of rubber boots.

We disassembled all the ways that can be cleaned with tape glue from different surfaces. And they did not forget about the consequences that threaten the use of certain means. Be careful and careful, and the choice of the method remains yours.

We call the adhesive tape, because it was this trademark that first appeared in the markets of our country. The creators gave her a name for english word Scotch - Scotsman, which in America last century was synonymous with miserness. This nickname came from users of the first samples of the tape, complaining that there was too little glue on the celofan strip. We now break their heads than to wash this glue from the tape, so much it happens.

In fact, difficulties when removing the remnants of the Scotch arise, only if you do not know some tricks. Despite the variety of species of this tape, the adhesive on an acrylic basis is used everywhere. It turns out that the choice of the means depends on the material on which contamination has been discovered.

Than laundering tape on plastic

In our houses plastic used everywhere: frames, household items, furniture, children's toys and many other items. And before cleaning it from the stains, you need to appreciate how good this plastic is. Qualitative material Can withstand more aggressive means than cheaper products. The contact time is also taken into account, because it is much more difficult to separate the threshing tape. Of ordinary programs can be useful:

Vegetable oil
White spirit or gasoline
Ordinary eraser
Hair dryer

Kitchen magic

Oddly enough, remove traces from the tape with easily any vegetable oil. It is mixed with glue, changing its properties. The oil is poured right on the contaminated surface or applied to the cloth and applied to the spot for several hours. The mass of the mass is erased by a conventional napkin, and the surface is washed with soap solution.

Disadvantages. Unfortunately, this method is not applicable if it is not possible to carefully wash the object from water with water.

Three, three, three and will ... purely

School eraser creates miracles, removing traces of even the most ancient scotch. The dirt is cleaned like traces of a pencil in the album, and it remains only to brush the softening with a damp soft cloth. This method is equally suitable for electrical engineering, and for plastic windows, for furniture or toys.

Heat to readiness

Well-made glue tightly entrusted to plastic surfaces. That is why it is important to remove the greasy tape or a protective film as fast as possible. It is better to repay from the plastic window of a piece of construction foam than waiting until under the influence of the sun and time, glue and frame of the glass package are alone in a single whole. The above applies to other subjects.

If it still happened, you can try to apply hair dryer. From heat glue mass softens and go to contact with other cleaning means. Help the hair dryer is indispensable when removing bilateral tape, since in addition to acrylic it contains rubber and various foams, tight pieces of which remain on everything that were glued for a long time.

Disadvantages. Not always at hand, it turns out a hair dryer, and besides, not all plastic will survive the temperature rise without losing decorativeness.

Spoiled with scotch bag

When transporting the boxes and doors of cabinets and a tomb is fixed using a sticky tape, and then cannot solve than laundering the tape. Funds are used here the same as for plastic, but there are some features of their use.