Is it possible to clean the toilet to the toilet. What to do and how to avoid the appearance of blockages in the sewer pipes and quickly clean the zoom in the sewage. Cleaning special chemicals

Plastic bottle

In case of extreme need, a plastic bottle can replace the vehicle.

How to use a bottle for cleaning the pipe?

FROM plastic bottle Cuts bottom, the cover tightly screw and the resulting device can be tried to create a hydraulic wave, like a vanatoux.

After use, the contaminated bottle should be immediately taken on the garbage.

Using a plumbing cable

There are several modifications.

From domestic, no more than 5 meters long, to professional devices, than you can easily break the blockage in the toilet or pipeline.

An ordinary plumbing cable is a metal elastic spring cable with a handle.

The cable is neatly introduced into the plumbing device and rotates, pushing and destroying the cause of the blockage. At the end of the cable, they often make a metal brush, with which you can get an object that served as the reason for obstruction.

If the cause of the pipe must be eliminated, refer to the plumbingserving your home. Elimination of the reasons for the obstruction of the pipe can take a long time and demand special Knowledge and skills.

In order not to take over the extra responsibility for flooding the neighbors with fecal masses as a result of non-professional action, it is better to seek help from specialists.

Video on the topic

What if the toilet clogged? Conduct plumbing? But not everyone can afford to spend half a day on his wait. In this article, I want to tell about how to solve the problem of the blockage yourself with a minimal set of skills and tools.

Cocks have reasons

Crarads, let's start with the fact that we will separate flies from the kitlet. Causes can be very different, and depending on the diagnosis we have to choose treatment.

So, what can score the toilet?

Funny, but its use is directly appointed in my memory never led to problems. Their cause is always the violation of the exploitation of the sewage. More specifically?

You are welcome:

• Toilet paper and paper towels. Yes, they are twisted in water, but the paper increases significantly in volume. If the toilet below the water mirror is completely clogged with Pipifax - the attempt was completely predictable to exacerbate the situation;

An even more unpleasant script - when newspapers are used instead of toilet paper or, worse, glossy magazine sheets. They are much more dense and clog the release of the plumbing device tightly.

• Fellers for cat trays. Of all the types of filler in the toilet, you can wash off only one - is made from pressed sawdust, and then in small portions. Pour into the sewer the commercial filler, lumps of silica gel or sand and hope for the best - unforgivable naivety: the blockage will be inevitable, as the collapse of capitalism;
• Food waste. Your white friend is able to absorb a couple of liters of the skysckers, but to dispose of the marinated tomatoes and spoiled porridge in it - a guaranteed way to get a blockage;
• Fit rags. They have an unpleasant wing to float into the aromatic distance when you pour water after washing the floors. A rag can block the release of the toilet or, which is much worse, clinging to the burr below the riser: Then the drains of all the upper floors will begin to enter your toilet and the bath;

• Construction garbage. If you pour out pieces of plaster and small fragments of concrete or bricks into sewers, the result will be quite predictable;
• Finally, completely by the edge of good and evil disposal of unused building mixtures by pouring them into the sewer. A concrete or masonry solution in a sanitary device usually means completing his career.

To find out what caused a blockage, spend a survey of family members about their latest actions before the emergence of the problem. If the guilty does not want to sign an obequinity turnout, you will have to paint water from the toilease for inspection and localization of the problem.

Tools

As you know, who is warned - he is armed. However, information on the causes of blockages is not the only weapon that we will have to use. For effective struggle With the clouds you need a small set of tools.

What kind of tool is useful to have homes in case of blockage?

• Vanutuz. There is no need to spend money on a professional tool with a piston and pressure gauge: a conventional rubber cap on a plastic or wooden handle for home Application No worse. Reasonable price of Vatuza - no more than 200 rubles;

• Sanitary. Its simplest version is a segment of a steel pin with a handle from curved in the form of the letter "Z" of the steel tube. Product production products with a plastic shell rotating relative to the handle and the springs of the springs rotate around the steel core are no different from it in a practical plan.

The cables with the drum are convenient because they can be used alone, without helper. However, such a product is several times more expensive than the usual plumbing cable. As a rule, they are bought by professionals: the device can noticeably save your time only when cleaning large number Vorships during the day.

If there are no tools in the nearest shopping stores - not trouble. As you will see further, often instead you can do with prize items.

Cleaning methods

I will figure out the ways to clean the cloth for each of its type separately. The fact is that the organizing agent and inorganic substances, as well as blocks of different density and with a different fraction require a different approach.

Paper

How to clear the toilet bowl if it is clogged with toilet paper or paper towels?

It costs a relatively soft plug, and it is stuck in the most narrow place of the device - in the hydraulic manner. The cause of the blockage can be just pouring toward the riser; At the same time, it collapses in 95% of cases and continues his way to sewer well And further, without creating any new problems.

To sell a paper stopper in the riser, you need to create a hydraulic panel - briefly increase the pressure with your neighbor to you. Make it is the easiest way to be vanatoux: Cover the water mirror and sharply press down. If necessary, repeat the operation several times. Burst spray: They fly in an unpredictable direction and air does not ignore.

Is it possible to clean the blockage without a vanza?

Its full functional analog is plastic bottle From the funny-having soul beverages with a volume of 2 - 2.5 liters. The bottle has enough to cut down the bottom and screw the plug. The instructions for cleaning looks the same as when using a ventilator: the bottle needs to sharply press one or several times.

Finally, at home, you can use a simple way to clean, which I often applied to the passagenik:

1. Fold several times wet rag and put it on the water mirror in the toilet;
2. Cropper Click on a rogue with mops, brushes or any stick. From the first or second time, the hydrophum arises squeezes the cause of the stammer.

Fillers

What if the toilet is clogged with a feline filler?

Vekor sand can be tried to clean the same hydraulic manner. This is triggered at about half of the cases. Sand residues are washed off at repeated plum.

It should be understood that you will not serve a blockage, but move it to the horizontal sewage site - the fierce in the basement of the house. Repeated blockage due to the accumulation of sand in horizontal pipes often leads to the flooding of the basement or the first floor.

When the litter must be flooded, the basement will be flooded, and with closed revisions in it - the first floor.

Another way to clean the sanding of sand is to pierce it with a cable, allowing water to be passed to the water toilet, and rinse the device with plenty of water through the hose connected to the water supply system.

With commercial clay fillers and silica gel, the situation is much more insulting: you will have to be armed with long rubber gloves and get the lumps of filler from the toilet to manually.

Food waste

How to eliminate zoom in the toilet caused by food waste?

Hydroat can help if it comes to the crumbly caress or finely chopped salad. Unfortunately, sometimes faith tenants apartment houses In the omnipotence of sewage comes to the absurd: I had to extract crude and boiled potatoes, pickled cucumbers and even large fish. These blockages can only be manually cleaned using rubber gloves.

In some cases, with a small amount of food waste in the toilet, chemical means for cleaning breaks (Mole, Tiret and others like them). As a rule, the remedy is a liquid with 5 - 15 percent of sodium hypochlorite, caustic NaOH soda, hydrochloric or oxalic acid; Chemically aggressive substances with long-term contact dissolve the organic.

In the photo Tiret - a chemical tool for cleaning blocks.

How to clean the toilet deposit of the toilet bowl with the help of such a means?

1. Drag all the water above the zero level and drain it into the sink or bath. The lower the concentration of the active substance (alkali or acid), the less effective will be chemical cleaned;
2. Fill the remedy in a volume of at least half-liters;
3. After a pause of 2 - 4 - 6 hours (depending on the volume of the zero), the residues of a partially dissolved plug are removed. If she did not leave the first time, try using the hydroudar method: there are great chances that, after dissolving part of the waste, the blockage will give up your efforts.

Instead of specialized chemicals to clean breaks, any solutions of acids and alkalis can be used: battery electrolyte, oxalic acid for cleaning ceramics, "Toilet duckling" with its 15 percent of hydrochloric acid in composition, etc.

Rags

How do you extract the rag-stuck in the toilet?

This can be done only with a sewer cable.

The procedure for action is:

1. Expand the cable and apply it to the toilet with continuous rotation of the handle by your assistant. The cable should be constantly stretched, otherwise it will begin to fold with loops;
2. Hooking a catch (it will be felt by the impeding rotation of the handle), continue rotation in the same direction, slowly pulling the tool for yourself. It is important not to give a rag to break from the hook.

A special case

Rag - one of the few possible causes Calculation stood for a riser that can score it between the floors, clinging to the razor of the squabble on the connection of sewer pipes. In this case, the lock cleaning algorithm is the same, but the cable is supplied to the riser through an open revision above the stood stammer (they are located on extreme floors and every three floors of an apartment building).

Do not clean the zago riser from below up. At the time of writing a pillar wastewater The height of several meters will hit an open audit. The splashes have a very resistant fragrance, are not afraid of abnormative vocabulary and overtake you in any corner of the room.

Construction garbage

It is removed only and exclusively manually, in seals. Low in the toilet, small trash will wash off after several tank plots.

Construction mixes

The hardened water level of the Gypsum sometimes can sometimes split the hammer to the long chisel after exploring the water. However, most often these attempts lead to the fact that the device splits at the base, near the sole.

If anyone was frozen in the toilet cement mortar, eliminate the problem with low blood is impossible in principle. The toilet changes to the new one.

Conclusion

I sincerely hope that this material will help the reader in solving everyday household problems. As usual, additional information will offer you a video in this article. I will be grateful for your additions and comments. Successes, Camrads!

Few think about how to eliminate the blockage in the toilet until the device ceases to function normally. But it is only for him to cling, as the eternal question arises immediately: what to do. Consider how to clear the toilet at home with the help of healthy tools, household instruments and special drugs.

Sewer device

The sewer system of the apartment building was developed by engineers in the past century. The standard collector diagram in the apartment is a system of connecting all pipes into a single transport line, in which due to the tilt of the drains, the signed by the sample in the house riser. Further transportation of their home is made in the direction of the centralized manifold. To ensure the ventilation of the sewer system, the upper part of the house riser goes to the roof. At the lowest point of the apartment sewage system, a tee input is established in the house riser:

• the diameter of one of the tower taps is 100 mm and the toilet and bidet are connected to it;
• two other discharges have diameters equal to 50 mm: plumbing in the bathroom, to another - kitchen appliances are connected to one of them.

To prevent unpleasant odor in the designs of plumbing uses hydroplays. It is a water barrier that is formed in the curved channel of the technical device when filling with water. At the time of wastewater discharge, the waterproofing ensures the flow of stocks and does not allow blockages. After the water is drained, the waterproof is updated.

Most often in the room sewage system, the places of wiring turns are clogged.To prevent pipeline breaks in problem places When installing the sewer system, some requirements must be met.

1. Pipes connecting the technical devices of the kitchen, bathroom and toilet with the tee input are installed under the slope in the side of the riser. This is a prerequisite for the uninterrupted passage of wastewater in the pipeline with a self-sealing sewage system.
2. Package parameters of pipes according to SNiP:
   • for pipes with a diameter of 50 mm - 3 cm for each meter of the pipeline;
   • for pipes with a diameter of 50 to 100 mm - 1.5-2 cm per 1 m of the pipeline;
   • if the diameter is more than 100 mm, the slope must be 0.8 cm for each meter of the pipeline.
3. In places of turns, the wiring is not recommended to install pipes at right angles. Instead of one angular connection in 90 o, it is advisable to do two to 135 oh. Such a design will significantly increase the bandwidth of the sewer pipeline and reduce the risk of breaking the formation.

Hydraulication is part of the sewage system of an apartment that prevents the formation of blockages and unpleasant odor

Why home toilet can clog out: the main causes

Slasors in the toilet and sewage occur on technological, mechanical or operational reasons.

1. The technological causes of the blockage are associated with errors and inaccuracies in the design or installation of the sewer system. These errors include: the wrong slope of the pipe, rectangular fitting, insufficient cross section of the connecting pipe, incorrect installation of the toilet. You can only eliminate frequent blockages arising from technological errors, you can only re-perform the installation of plumbing and sewer pipes.
2. Mechanical causes of the bedside are associated with entering the waterproofing of the toilet and sewer pipes of foreign objects. For example, it is unacceptable to throw into a toilet paper, feline toilet fillers, food residues, construction trash and so on. Observing the rules for the operation of plumbing, you can prevent mechanical blockage. To eliminate the blocking, mechanical cleaning methods will be required.
3. Operational causes of the interface are due to the long-term operation of the equipment. When using a sanitary appliance on the inner walls of the toilet and sewer pipes, fat deposits are formed over time. It sticks with a small garbage, such as hair, tea brewing and so on, which increases the size of the growth and thereby reduces the diameter for the passage of wastewater. Accelerates operational blockage, for example, pouring fat liquids into the toilet. Eliminate the blockage can be eliminated using chemical, hydraulic or mechanical cleaning methods.

Definition of a seat

If water does not go out only from the toilet, then the blockage may be in the hydrotherapy or in the junction of the device with the sewer pipe. He is eliminated independently or with the involvement of a specialist management company at the expense of the tenant.

If water does not leave all sanitary and technical devices installed in the apartment, then the block is located in the house rider. The sign of such a global blockage is the filling of the bath with wastewater from the sewage through the drain hole. The elimination of the browning bed is performed by emergency services of the utility enterprise immediately.

How to independently eliminate the plot of the plumbing device

If you have clogged to the toilet and you made a decision to solve the problem yourself, the methods proposed below will help you with this.

Cleaning folk methods

To solve various problems in parallel with professional methods there are many people's methods. In some cases, the use of various primary means replaces professional methods. And the other way around, when based on folk methods Professional tools and means are being developed and launched.

How to clean drain with a fucking and plastic bottle

One of the people's facilities to eliminate the toilet in the toilet is cleaning with a plumbing rod and a conventional plastic bottle that replace the vehicle.

1. Schoshik Clean the waterproofing of the toilet bowl. If you succeed, it will be destroyed.
2. Bottle before use a little change: Cut the bottom. The bottle cover should be closed.
3. To eliminate the break, it is necessary to lower the bottle until it stops into the drain hole of the toilet. Making intense reciprocating movements up-down, thereby creating pressure drops, can be eliminated.

Using a rod and a conventional plastic bottle, you can remove the toilet zoom

A quick way to break the blockage with a rod and plastic bottle - video

Troubleshooting with film and scotch

It is possible to effectively eliminate the blockage using a dense polyethylene or vinyl film and bilateral tape. The film should not be deformed, and its size and form is not less than the toilet cover.

1. Raise the lid and the toilet seat.
2. Along the rim of the ceramic bowl of the toilet bowl, attach double-sided tape. It must be a closed continuous line.
3. Cover the surface of the toilet with film. Secure the film, adding it in places of contact with scotch. Thus, you create a hermetically closed space inside the bowl of the closed toilet.
4. Press the water shutter button to the toilet. If you did everything right, the film swells. If this did not happen, check the integrity of the film, the tightness of its unit with the toilet and repeat the procedure.
5. Put on the film, trying to return it to the original position. Acting in this way, you will create pressure on the contents of the toilet bowl and destroy the blockage.

How to clear the toilet with film and scotch - video

Other ways to clean the plumbing device in the toilet

If you are sure that the blocking in the toilet is operational in nature, you can try to eliminate it with any means that destroy fats. For example, with whiteness or means for washing dishes. Well dissolves fat hot water. So sometimes it is possible to destroy the blockage, simply merging in the toilet the hot water from the shower.

Pill the toilet bowls are categorically prohibited! This leads to the formation of cracks in the toilet.

It is possible to effectively fix the operational blockage with the help of mustard. This is an environmentally friendly way.

1. To eliminate the break, you can pour out a stack of dry mustard into the drain hole of the toilet bowl and stir the rod.
2. For achievement better results Mustard powder can be pre-dissolved in warm water, and then pour into the toilet.
3. After 2 hours, rinse with water.

How to eliminate blockage from toilet paper using food soda

It is possible to eliminate the operational block with the help of conventional food soda, which in most cases is available in each mistress.

1. Dissolve the stripping of soda in warm water.
2. Pour to the drain hole toilet bowl.
3. After 2 hours, the toilet washed with water.

There are more effective method Using food soda. Since the soda solution has an alkaline reaction if it is in a frying pan, it will become more active and will be able to better cope with the clog. To do this, you will need:

• 150 g of food soda (approximately 5 tablespoons with a slide);
• 200 ml of water;
• pan.

Step-by-step instruction:

1. Pour soda to the pan and roller on a weak heat for 15 minutes continuously stirring. By the end of the process, carbon dioxide is the release of carbon dioxide, and the soda will acquire greater flowability.
2. Remove the frying pan from the fire and give to cool for 10 minutes. This is a prerequisite required to prevent burns when connecting a substance with water.
3. The resulting powder is suspended into the working capacity and add 200 ml of water to it. Mix well. Sodium carbonate should either completely dissolve in water, or leave a small precipitate.
4. The resulting solution of light brown is pour into the drain hole of the toilet bowl.
5. After 2 hours, the toilet is rinsed with plenty of water.

Special chemicals

To solve problems with a climbed toilet, you can use special funds that are widely represented on the shelves of economic shops by manufacturers of the chemical industry. When applying chemicals, it is necessary to strictly comply with the instructions for the drug: use the specified dosage and not violate the safety technique. It is unacceptable to use multiple money at the same time. At best, this will not give any effect, and at worst - the reaction when connecting drugs will be unpredictable. After the liquidation of the unit, the toilet should be well rinsed with water.

Potchen - an effective chemical to eliminate a blockage in the toilet

Chemical Review Review Toilet Table

Cleaning the toilet Vanthazom

Vantuz is a very simple, but effective tool for cleaning the toilet. It is intended for situations where the water does not leave the bowl of the device. It has simple design: Rubber bowl, fixed on a plastic or wooden handle.

1. To cover the cup of water, the drain hole of the toilet, thereby completely immersing it into the water.
2. Strongly press the handle and make a few reciprocating movements up-down, without tearing the bowls of the vanza from the surface of the toilet.
3. Steel tool from water.
4. The procedure is repeated several times until the breakdown is completely eliminated.

Principle of work of Vantuza: Pressing on the handle of the Vantuza, we create hydraulic pressure On the water pole in the waterproof toilet bowl, as a result of which the block breaks.

Cleaning the toilet "Doll"

A small bag made of tight fabric and filled with sand, "doll" - is used to quickly remove the blockage. It should freely pass into the drain hole of the toilet. The bag is firmly tied with a linen rope or a strong cord.

1. Device omit to the drain hole of the toilet. At the same time, the rope should not be stretched, but its edge must be kept hard.
2. Merge water in the toilet. The "doll", moving the flow of water, will move along the flow and, due to its own mass, the base is passing.

The effectiveness of this method causes a number of questions.

1. The first thing that should be paid to, if in the toilet zore and water does not come off or comes slowly, then no movement of the "dolls" along with the flow of water will not be, because there is no stream itself.
2. The second, but no less important question, where to store a device after use or it is simply disposable. If it is necessary to throw it out after each use and constantly masked re-for the following blockages, it turns out troublesome, and not effectively.

Using a cable for cleaning the toilet with your own hands

Using a cable for cleaning the toilet - the most spectacular way to eliminate any blockages. That is why professionals are always at first trying to clean the toilet with a cable and only then pass to other methods, for example, disassemble the design. Soft vibration cables are used to eliminate breaks in the apartment sewer system. For standard layout It is enough to have a cable with a length of 3 m. Since the toilet is always installed in the immediate vicinity of the house riser, for cleaning only the toilet is suitable for 1 m long. When using a short tool, one person can be done. If it has a length of 3 m or more, work is performed together.

1. The cable is lowered by the workpiece into a drain hole to contact with a blockage. It must be stretched, the formation of the loops is unacceptable.
2. Slowly rotating the cable handle clockwise, promoted the cable deep into, thereby destroying the blockage.
3. For complete cleansing, the procedure is repeated several times.

The rotation of the vibration cable knob counterclockwise can lead to a cable breakage.

In what cases is worth calling plumbing

Specialist help is needed in any situations when it is not possible to solve the problem. If the block is in the houses of riser and the bath through the drain hole is filled with uncleanness, plumbing should be called urgently. In this case, it is necessary to overlap water on the water supply riser and ask for neighbors from the upper floors not to use the sewage to eliminate the blockage. Then you should contact the emergency service management company.

Prevention blocks

The best prevention of toilet breaks - compliance with the rules for the use of plumbing:

• use appliances directly intended;
• do not dispose of food residues in the toilet, a lot of paper, tampons and other hygiene and garbage;
• rinse the toilet with water after each use: This will prevent the process of forming deposits on its inner walls and pipes.

Additionally, it is possible to make salt prophylaxis for the toilet 1 times in one or two weeks.

1. In the morning or in the evening before bedtime, pour one glass of salt into the drain hole of the toilet. By dissolving in water of the hydraulic circuit breaker, the salt is converted to a saline solution, which disrupts fat deposits on the inner surface of the toilet.
2. After 8-10 hours, rinse the toilet bowl with water.

Compliance with these simple rules Gets rid of you from problems with blocks of toilet bowl.

Having considered the proposed methods, select for yourself optimal way Cleaning toilet bowls. When the problem is solved, it is worth thinking how to prevent the repetition of a similar situation in the future.

Send the material to you on E-mail

Normal functioning is needed around the clock. But such emergencies arise unexpectedly. It is not always possible to quickly organize the visit of Plumbing. In any case, the appeal to specialists will be associated with certain costs. However, you can quickly solve the problem if the toilet has been hammered. How to clear your own stock, described in detail in this article. In addition to different instructions and methods here are given of valid preventive measures.

Typical cleaning tools are not always effective. You have to use more efficient techniques

All toilet bowls, with a support for the floor and, are connected to the central riser through a special area of \u200b\u200bthe pipeline. It forms a hydraulic shutter, which fluctuates in the sewage system, but preventing the opposite penetration of unpleasant odors. Its complex form can be an obstacle to moving large and solid items.

It is clear that when using the option "in the floor", a qualitative drain is easier to provide. If the release of a horizontal type is applied, it is necessary to minimize the distance to the vertical site, or create the necessary slope further.

With wrong installed system And errors in the process of use inside can accumulate pollution of different nature. The most complex - halves of calcium salts. They are formed with high water rigidity. It is difficult to remove them with a mechanical way, because of the sufficiently high storage strength. The use of potent chemicals (acids) is also able to damage the components of the pipeline.

The following group of problems is explained by violation of the rules of operation. These engineering systems Create with the use of large diameter pipes. However, they can be clogged with porous volumetric feline-toilet fillers, children's diapers, other outsiders. In the most difficult situations, none of the methods of cleaning will be effective. It is much wiser to eliminate the problems of this type than to deal with unpleasant consequences.

The information provided allows preliminary conclusions about useful preventive measures:

• When choosing plumbing and during the installation, attention should be paid to the free passage of wastewater. The corresponding track should not be too complicated. Be sure to comply with the standards at a distance to the central vertical tube and the slope in its direction.
• If the replacement of old pipes is performed, it is better not to reduce the diameter. The corresponding changes are made only after careful calculations, consultations with competent specialists.
• In the course of operation, unauthorized items cannot be thrown into the toilet. This rule is easier than to break through the blockage in the toilet at a large distance from the drain hole.
• It is useful to regularly use special means for cleaning the internal walls of pipes of the sewage system.

For your information! It is recommended to close the toilet cover during repair workSo that the construction trash does not fall into it.

The toilet clogged: how to clean yourself the runoff using different ways

Above were considered miscellaneous methods. But sometimes problems arise in constructive reasons. They will not be able to eliminate preventive measures to overhaul. In any case, hasty actions are needed if water does not go in the toilet. What to do - told below, but do not try to immediately apply full drain. In some tanks, more than 3 liters of water accumulate, so you can pour all the floor with unquieties with such manipulations. To eliminate additional trouble, overlap the feed crane. To verify the effectiveness of the system, one-time doses of liquid are not more than 1-1.5 liters.

For your information! The simplest additional diagnosis is to check the flow of the soul, other connected plumbing devices. If it does not function, it means clogging is in a common pipe. Solve such a problem own forces In a multi-storey building will not work, so you have to call specialists.

What you can apply if there is no cantez for toilet

You should carefully remove it out. If there are no rubber gloves of suitable length, use conventional plastic bags.

It is necessary such a product inexpensively, takes little space, it is not difficult to use it. These arguments are enough to acquire Vanuza. Select a model with a suitable diameter of the flexible part. It must be 1-2 cm more than a drain hole.

It is created from the usual plastic container of the corresponding dimensions (1.5-2 liters). Dysheko cut off exactly. The cover is tightly spinning. The tool is inserted into the drain hole, make several sharp movements inside and out. Interestingly, some professionals successfully use such a means to clean the toilet bowls. After developing the appropriate skills, it is capable of creating even greater hydraulic pressure than standard vehicle.

Such a product will damage the plumbing and pipes. But with the help of this device you can penetrate 1.5-2 meters inside the drain system. If the riser is located near, this will be enough. To simplify passage through the locations of the beggars, the hose rotate. It is convenient to work in household gloves. With their help, a reliable capture is ensured, protection of hands from pollution and scratches. In the course of the procedure, the procedure agitates water so as not to miss the moment of clogging.

The next device from the girlfriend is a small bag tied to the twine (1.5-2 m). It is filled with sand, but not nuts, or stones, so as not to damage ceramics. The "shock" device is lowered into the drain area by holding the other end of the twine in the hand. The drain is then water, you can try to destroy not too durable blocking at a fairly long distance. The used means is extruded out, thrown into the trash can.

The toilet clogged: how to clean the system at home with the help of improvised and special chemical compositions

The study of their effectiveness should be engaged separately. It can only be noted that such drugs are often tested. Research results are not difficult to find on the forums and thematic sites on the Internet. When using such funds, the rules of official instructions are followed. They specified the maximum processing period, the temperature and other additional conditions are shown.

For your information! Some particularly aggressive chemical compounds should be used with caution. They are able to damage polymer and metal sewage components. With evaporation, they significantly worsen the composition of the atmosphere. In some cases, intensive ventilation of the room is necessary.

There is actually an effective technique. It is used if the toilet clouded, asperial chemicals "at hand" not. What to do at home, described in the next step by step instruction:

• Take 250-300 g of sodium bugger. It is not necessary to scare difficulties - this is normal baking soda. For this procedure, there is a 1/2-3 / 4 standard pack. The required portion is falling asleep with one dose into the drain hole. Pushing the powder deeper with plastic enshik.
• Immediately after this is poured into the toilet 250-300 ml of table vinegar (standard concentration - 9%).
• These substances activate an alkaline chemical reaction. Under its influence, not only fats, but even calcium deposits are decomposable. The duration of the operation ranges from 15 to 25 minutes.

Upon completion - 2-3 liters of boiling water are poured into the drain, or washed with hot water. The second method is preferable if polymer pipes are installed.

Important! Standard pVC pipes For sewage, depending on the modification, calculated on the operating temperature from + 40 ° C to + 60 ° C. Similar restrictions should be taken into account with respect to corrugated connecting elements that are used to connect toilet to the sewage system.

How to clean the blockage in the toilet: professional technologies

The principle of this technology is clear from the drawing. When rotating the hose has to overcome the friction forces between it and the walls of the plumbing system. In this embodiment, this problem is not, since the shell moves only in the longitudinal direction. Rotational motions inserted inside are transmitted to a working tool in the end part.

Do not worry if the blockage in the toilet was formed. With the help of the information outlined, any person will deal with what to do. It is necessary to understand that the recessive devices are suitable, rather, for unexpected emergencies. It is better to choose and purchase in advance suitable effective means. Chemical compounds are suitable for regular and preventive measures, as they have a limited shelf life.

Modern housing, be it vacation home, cottage or apartment in a high-rise building, to achieve the maximum level of comfort should have a regularly working sewage system for wastewater collection. Such a system consists of several devices and, as in all sorts of complex systems, malfunctions may occur in it. And immediately arises the question, to? In order to independently cope with emergency situations in the sewer system, it is enough to know several simple techniques, for example, how to clear the blockage in the toilet.

Sewage system device

In general, the system for collecting and removing private waters consists of two large parts: internal and outdoor. Inner system On the device is common to all types of dwellings, whether it is an apartment in a height or an elite country mansion. It consists of plumbing equipment designed to use hot or cold water systems. The composition of such equipment may include sinks, washing for kitchen utensils, bathripers, shower cabins and shower pallets and various automatic devices, such as washing machines or machinery or dishwashers, as well as equipment for hygiene: toilet and bidets.

In the equipment for direct use of water (sinks or bathroom), water after passing the hole of the runoff enters the siphon, which delays part of the contaminants and creates a water shutter that prevents air penetration (and hence the smells) and sewage pipelines. In the toilet, water shutter is usually embedded in the design itself and is located inside the equipment. After passing the water shutter, the estate enroll in the receiving individual sewer pipe. For shells and bathroom, a pipe with a diameter of 5 centimeters is suitable, but when the toilet is connected, a pipe with a large cross section of 10 centimeters is usually used. In the future, individual sewer pipes are connected to the pipes of a larger diameter and eventually all the drains fall into a single output sewer tube of a large diameter or to a riser in an apartment building.

Unitaza scheme

Repair and maintenance, cleaning of such an inside of the sewer system is the duty and owner of the apartment in an apartment building.

Channelization scheme

Next, the outer part of the sewage system begins, which consists of sewer pipes and \\ or wastewater treatment equipment. For accommodation in a private house, repair or maintenance of this part of the system is made by the owner of the house.

Causes of blocks in the toilet

The main reason for the occurrence of blockages in the toilet is the violation of the rules of its operation. Remember that the toilet is not intended to dispose of large and insoluble objects in water. In this case, it is better to use the usual household trash. If you get into the drain hole to the toilet package of polyethylene, rags, other insoluble items - the likelihood of the fact that they will not pass to the bending of the laying of the toilet or stuck in the removal sewer tube. Remember this and do not cling to the toilet and pipes.

The second main reason for the formation of blockages is the layers and deposits accumulating on the inner surface of the sewer pipelines. A well-designed and constructed sewer system, acting on the principle of "Samotek", should have the effect of self-cleaning. At the same time, new portions of wastewater were washed off and carry solid particles on the surface of the pipe, which remained from previous drains on the surface of the pipe. However, in some cases, with incorrect construction or use of the system, such accumulation and particles may not be flushed, but to engage for roughness on the surface of the pipes, especially in places of compounds or bends.

A frequent cause of clogging accumulation is hair or domestic wool, which can form a kind of grid. Also, layers in sewage pipes can occur from animal fats or from water-dissolved chemicals or building mixtures.

Prices for sanitary cable

Santechnic cable

Prevention of blocks in sewage

In order to avoid the emergency appearance of blockages in plumbing equipment, including in the toilet it should be followed by the rules of its operation and use them strictly for its intended purpose. To prevent the occurrence of blockages, sewer pipelines can be cleaned regularly. This is especially important for homes with old types of sewage systems formed from cast iron pipes. Inner surface cast-iron pipe It has a sufficiently rough surface, on which various particles suspended in drains are intense. From time to time, such a sewer must be prophylactically cleaned. Cleaning the inner surface of the laying of the toilet and the inner surface of the pipe can be mechanically or chemical method.

• When using a mechanical method, washing pumps are used, whose flexible long hose is equipped with a special nozzle. Water enters the tip of the hose under pressure and it is moving along the sewer system, destroying and flushing the resulting layers.
• When using a mechanical method, special chemical solutions are poured into the sewer system, which dissolve the formed accumulation.

Mechanical and chemical ways of cleaning can be combined. In this case, the cleaning of the inner surface is made using the nozzle and the pump, but not ordinary water, but the solution, is incorporated into the pressure hose.

Flushing toiletza

Removal to the toilet

If preventive work did not help and in your toilet bowl was formed, it can also be chemically or mechanically. It is possible to use such methods sequentially, as signs of impedance of the waste of wastewater from the toilet. "Z. You can read in our article. "

Remove the blockage in the toilet chemistry

Most. simple way elimination of accumulations on the inner surface of the laying of the toilet bowl is the use of ordinary boiling water. Hot water is a good solvent and in some cases it can help. However, note that the faience of sanitary equipment is sensitive to a large and sharp temperature difference. Therefore, hot water in the toilet should be poured gradually, by analogy with pouring hot tea in a glass cup.

Pipe cleaning agents

Heat for dissolving frozen and accumulated drains can be submitted in another way. To do this, you can use a construction hairdryer, which is heated by a place with difficult passage of wastewater. As with boiling water - using a construction hairdryer, try not to damage the equipment. For example, connecting cuffs and silicone-based lubricants can be collapsed under high temperatures.

Assist in the elimination of the difficult passage of the effluent may be a concentrated solution of soda. Mix half the pack on the water bucket and pour into the toilet. The formed alkaline solution can destroy the previously formed accumulation.

You can also use ready-made chemical solutions. In the assortment of stores with goods for home there is a rich selection of household chemicals, including for cleaning sewer pipes. Such a solution can eliminate the difficulties in the passage of waste. But when buying household chemicals, carefully read the composition of the product and the procedure for its use. It may be overly aggressive and destroy some sedimentation areas.

Table. Clearance cleaning with dishwashing tools.

We use mechanical cleaning of toilet

If it came to the point that in your toilet off the water does not pass at all, then it is not possible to do only to a chemical way, but you have to use a full-fledged mechanical cleaning. The use of equipment for cleaning plumbing will allow you to either destroy the blockage, formed from several trapped fragments, so and push or pull out a large item stuck in plumbing equipment Or in the sewer pipe.

The most common way to mechanically eliminate the zero in the toilet is to use the household venture. This item can be purchased at any economic store, it consists of a rubber or plastic hemisphere and a handle attached to it various materials. The essence of the actions of the toilet is to transmit pressure from the wastewater to the subject that the cause of clogging. Vanatuz applies as follows:

Cleaning the toilet Vanthazom

Clean the toilet toilet canto

Often to eliminate the blocking enough of just one high-quality vehicle, in more serious cases, it may be necessary for a plumbing cable (we will tell more detailed about it later).

Step 1. Avoid water to overflow from the toilet. If it goes bad after flushing, it is not recommended to rebuff - it is better to remove drain tank Cover, and then break the damper. After that, the water will not fall into the toilet from the tank.

Step 2. Start preparing the room. Explore paper towels or old newspapers around the toilet bowl (this is the case if the leakage occurs). You can also turn on the fan - it will afford to loosen unpleasant flavors. It is also desirable to wear rubber gloves (better to elbow) and old unnecessary clothing. Just in case.

Step 3.Try to inspect the formed blockage. If you notice any specific item, you can try to extract it from a plumbing device. If this item is visible, but it is impossible to remove it with his hands, then the canuzu can not be applied - proceed to one of the more "serious" methods.

Step 4. Prefer the high-quality vehicle - preferably in the shape of a ball or with a special side at the bottom (to provide better tightness). Cheap cantuz-sucker is better not to use, since it is almost no benefit.

Note! If necessary, if the vetuz does not provide tightness - it can be copied by an unnecessary cloth. In addition, Vanutuz is recommended to hold a while in hot water in order to soften the rubber.

Step 5. Place the Vanutuz in the toilet, completely breaking the drain. It is important that the tool is located below the water level. Produce reciprocating movements - press the vehicle and dramatically pull on yourself. Act until water decreases. In the absence of solid objects, the block is most likely to be eliminated.

Step 6. Fresh water from the drain tank to check the drain. If the zoom still prevents the free outage of water, repeat all actions. It is possible that this will require a lot of time.

When entering the unitaza of large-sized objects or the formation of a solid clogging section, you can use a plumbing cable. At one end there is a handle that gives the root cable. And at the other end, in addition to the sharp nozzle capable of destroying the accumulated sediments, the nozzles in the form of a spiral can be attached. It can be acting as a fishing crochet, removing the object that fell into a plums of the toilet against the natural direction of the wastewater movement. In order to deliver a spiral nozzle to the place of clogging, the tip must be omitted into the drain and rotating the cable - to spend it on the bending of the toilet and the sewer pipeline.

Clearance toilet cable

We use a sanitary cable

Step 1. Such a cable, known in the people as "hedgehog" is, in fact, the flexible wire capable of penetrating into the long turns of the pipes. Preference is better to give the auger cable, in order not to blur and not scratch the toilet.

Step 2. Place one end of this cable into the drain hole. Push it, continue the feed until the end of the cable is stored in the obstacle.

Step 3. Scroll through the cable, push it through a blockage. The latter is required to grind, so he passed into the pipe. As a rule, it takes no more than a few minutes. After the water leaves, drain the water from the tank. At the same time, follow it to leave the same speed.

Step 4. Remove B. reverse side. In some cases, in order to skip the "hedgehog" to the other side, the toilet has to be removed. But if you know that any object is stuck in the plumbing device, but the toilets have never been removed before, it is better to call the plumbing.

Master Class. Cleaning toilet media via wire hanger

Step 1. Take a wire hanger, cut it, using metal scissors. Maximize the wire. It is desirable that the hanger has a plastic coating, since a naked wire can easily scratch the plumbing device.

Step 2. Put high-quality rubber gloves.

Step 3. Place the end of the wire deep plum.

Step 4. Perform a breakdown processing by moving tools in different directions. So you break the blockage to wash it.

Step 5. Remove the hanger, renew the flow of water. At the end, rinse the toilet.

If you have permanent blockages directly in the toilet, you probably have to revise the procedure for its use, having an explanatory work with households, or to replace the toilet, different from the old design. Also, it is possible to constant the cause of blockages in the toilet may become an irregular supply of a sewer pipe to equipment. The pipe can be supplied or with the wrong calculation of its slope, or the equipment of the inappropriate cross section is used. In this case, eliminate the occurrence of blockages can partial repair of the sewer system.

Video - How to Clean VorsE in Toilet