Erase the remains of the scotch. Than laundering glue from tape from surfaces and fabric. How to remove remnants of glue from glass and mirror surfaces

Kirill Sysoev

Cornish hands do not know boredom!

Content

Scotch is widely used in everyday life, but few people think about its use of the results remaining on the surface of the furniture. After removal of self-adhesive tape, sticky stains are preserved, which are not immediately eliminated, they attract dust to themselves and become dark from dirt. Such celebrates strongly spoil appearance furniture, refrigerators, dishes, car windows, window Rams, doors and other items. Fully laundering traces from tape from plastic is the harder than the time has passed since the formation of sticky spots.

Than otterset tape with plastic

Before eliminating spots from sticky tape, take into account precautions in order not to spoil the appearance of products from the polymer material. It will be reasonable to first check the reaction of the selected agent on the small area of \u200b\u200bthe plastic in an invisible place. There are plenty of money than you can wash the glue from the tape from the plastic, without damaging the surface. Suitable as potent chemicals and homemade breeding agents. Proven methods for removing old spots from the tape from the plastic surface:

The strip of the new scotch is well removed by fresh residues from adhesive tape. During the procedure for the elimination of the sticky layer from Scotch acts quickly. Movements with this procedure must be impustable - the segment of the sticky tape is plipped and the glue is jerk.
Fabric moistened in hot water Really for 3-4 minutes without effort and harm for plastic, remove the fresh residues of glue from the tape.
The household steam generator is easy to get rid of sticky marks. The action of hot wet air will help to quickly remove the remnants of the scotch.
The hairdryer is construction or drying hair is removed both fresh and solar stains from bilateral scotch. To remove such residues, it is recommended to warm up the location of pollution for 3 minutes. After that, acting neatly flat blade, to avoid risk scratch a plastic surface, pry the edge and remove the remnants of the sticky ribbon from the plastic.

How to launder traces from scotch

A poor-quality adhesive strip is poorly attached, and a good sticky tape after time is difficult to remove from various surfaces. Most people at least once in their lives came across the question than washing the glue from the tape from the plastic, so as not to spoil the appearance of the thing. The choice of a cleaning method depends on the availability of an affordable home, chemical or professional agent, as well as from the structure of the polymer material, from the surface of which you need to remove sticky stains from the tape.

Screw tools

Rubbing traces from tape from plastic with the help of vegetable oil, optionally sunflower, olive, linen, sesame or other are suitable. This tool is the safest for the surface of polymers. It is unrealistic to damage vegetable fat, scratch or discolor plastic. Under the influence of oil, glue is impregnated and increases in the amount, after 15-20 minutes, it will only be left to remove pollution with a piece of fabric or paper napkin.

To wash off the adhesive traces of tape, alcohol-containing means are suitable. If alcoholic beverages are used (vodka), they should not contain sugars and dyes. The higher the fortress, the easier it is to erase the glue, so medical alcohol is the most effective. They are abundantly wrapped with cotton swab, processed the location of the contamination, will wait 3-5 minutes and wipe the rag. The alcohol has a whitening effect for products from polymers, for this reason it is strictly forbidden to apply on color plastic surfaces.

Easily and quickly will help remove traces from the tape from the plastic food soda. To prepare a mixture, a tea or a table spoon, sodium bicarbonate powder is bred by water, to a casual consistency. Fool into a cooked solution with a sponge and the place of contamination is worn. After you managed to extort the remnants of the scotch from furniture, windows or other interior items, the site is wiping at first, and then dry rag.

Delicately remove sticky traces from the tape from the objects made of polymer material. The erasing of the rubber is a clutch of pollution to the complete disappearance of glue residues. At the end of the process, smeared the sorts from the purified polymer surface. Wash the stains from the adhesive tape is easy if their area is small. Volumetric pollution areas are very long and difficult to rub with a gum.

Chemical methods

White spirit, which is purified by gasoline, has the properties of a soft solvent. For a plastic surface, this liquid is virtually safe, but it is better to check the coating reaction on a low-net area. It is not necessary to use White spirit on painted or polished surfaces of the interior items made of polymer material. Influence on the stain it is necessary to be richly moistened in gasoline tampon until completely removal of contamination.

Acetone refers to aggressive purification methods plastic surfaces. The colorless liquid can easily cope with sticky tracks from the tape, but can spoil the coating of furniture or other household items. On plastic after treatment with acetone, dull spots may remain. But this is an organic matter, like a varnish removal fluid, is safe for windows, it is easy and convenient to clean large glazing areas that have contaminants.

Detergent For windows based on the ammonic alcohol, it will be easily removed from the plastic surface tracks from the tape. To eliminate the remains of adhesive tape, splashes the means into the place of pollution and wipe it with a sponge. After dissolving sticky traces, the processed area is wiping with paper napkins. Car lubers will help to cope with the remnants of the tape on the glasses, a paint-made metal or in the cabin of the car special means for automotive windows.

Vinegar is present in each house, it is often used not only for cooking, but also in order to purify space. It is effective for removing sticky marks from Scotch. To remove pollution from the plastic surface, the vinegar is better not to dissolve water, in a concentrated form it will work faster. Mixed in a vinegar sponge clutch sticky contamination until complete disappearance. At the end of the procedure, the processed area is wiping with a damp cloth or a napkin.

Using heating

In the plastic surface, glue is eaten "tightly", especially when the stain is old. In the adhesive basis, except acrylic, rubber and other foams may be present, such as two-way tape. In such circumstances, before trying to rub the traces of sticky tape from plastic with all sorts of means, the spots are pre-softened.

It will help in this steam generator, household or construction hairdryer. The main thing is not to overdo it, especially using professional heating equipment so that under the influence of high temperature does not deform the surface. The hairdryer or the steam generator holds at a distance from 15 to 20 cm about 3 minutes, periodically checking as far as contamination softened.

Meller's spray to remove traces from glue perfectly removes even the remains of bilateral tape. A special cleaning agent effectively eliminates stains from glue from all surfaces, including with polymeric. To drop the remains of adhesive tape, the rag is abundantly wetted and moisturized the place of pollution. Leave the solvent for 5-7 minutes and then the remnants of glue are written. After completing the procedure, the processed area is wiping with a wet and then a dry napkin.

The universal aerosol cleaner cleaner Scotch-Weld with a citrus smell is specifically designed to wash off any kind of glue. A transparent liquid mixture of oil distillates is highly efficient when removing residues of adhesive tape on plastic. Before use, the cylinder shakes, moisturize the napkin and wipe the contaminated area. In the case of old spots from Scotch, the procedure is repeated several times.

Video

Found in the text error? Highlight it, press Ctrl + Enter and we will fix everything!

Adhesive tape, or scotch, as most people call it, is one of the most popular temporary fixation methods. But after removing the adhesive tape from the plastic surface, the question may arise, what to wash the glue from the tape from the plastic. The "back side" of the wonderful properties of the Scotch is often sticky stripes of glue, which remain after removing the tape. The sticky stripe quickly draws, covered with mud, and even a thin layer is hard enough. The editorial board will come to the rescue and will reveal all the subtleties removal of a hated adhesive trail with plastic.

No wonder many crimes open immediately "hot wakes". With the adhesive strip from the tape the same story - the faster the tape from the plastic will be, the easier it will be. Consider the main ways.

How to Clean Scotch from Plastic Sticking Strips of New Scotch

This option can work if unstable. The principle and sequence of actions are the most simple as possible: we reach from the roll with a scotch bar of the desired length, press to the place, smooth, we ride sharply. Start on the adhesive tape, if everything is done correctly. But, most likely, part of the glue will remain on the spot, and will have to apply the following.

How to tip the tape from plastic with a cloth moistened in hot water

If there is enough time in stock, you can drop the adhesive spot with a tissue dipped in warm water. To do this, you need to wet the rag, press it at the time to the place when the adhesive layer soften, linse the surface. It will take about 5-8 minutes.

Mechanical removal of traces of Scotch Stationery

A good liquidation means will be able to serve as a stationery eraser. In the case when the glue is still slightly, this method is fits bad, because The substance sticks partially to the eraser. It can erase glue from plastic traces as well as a pencil from pages. It will be necessary to apply an effort to achieve the desired result.

Therefore, gentle female hands may not drop the mud to the end. If the surface is large, use a drill on unprecedented revolutions with a special nozzle.

Article on the topic:

: folk ways and special funds. Dirt removal options from specific pollution: dirt spots, paints, whitewings, mounting foam, glue, primer, lime and cement - in our publication.

Than from the primary means to wash the solar traces from the tape on the plastic

It is much more difficult to get rid of the adversal adhesive basis. But there is nothing impossible here. You only need to select a suitable way and tool.

How to remove traces from tape on plastic vegetable oil and alcohol

It is suitable vegetable oil from any raw materials (seeds or olives), which at this time is present in the kitchen. Wetted with an oil napkin leaves on top of the stains for several hours, during this gap it will reduce the adhesion of the adhesive substance. After it is enough to wipe the plastic with a wet towel to erase the remnants. Soap solution is used to remove the bold layer. You can cook it using a washing powder, soap or dishes.

Ethyl and ammonia alcohol refers to more aggressive means. Therefore, before applying them for, it is worth checking the reaction of the material on a hidden area from the eye. It is impossible to use alcohol on the painted surface, because How it will remove the paint layer. To remove some alcohol on the trails of adhesive tape (you can easily rub). Once the glue is removed, wipe with a napkin or flaple fabric.

How to wash the tape with casic soda from the plastic

Measuring Torust food Soda (on the eye), you need to mix it with a small amount of water to the creamy mass.

This cleaner is applied to the surface with. Soda performs in a mixture by abrasive, which can easily cope with the stain. If after processing there were still traces of glue, you should repeat the "Event" again. After wing the place of treatment with a damp cloth, and then wipe dry.

Than from chemical means linen glue from tape

Powder products, gasoline - all this will help in the fight against adhesive trail on plastic.

Means for washing windows. The substances contained in the composition of funds, different manufacturers firms, perfectly will be perfectly solely with traces of adhesive tape. To clean the surface you need:

Spray liquid on.
Give five minutes to softening the sticky substance.
Loose glue from the surface.

Powder products. Very carefully apply this method to plastic plastic. If it is not sufficiently resistant to mechanical influences, then you do not need to rub the products with powder. To remove dirt, perform the following actions:

Wet sponge dip in powder.
Press the sponge to the spot for 5-10 minutes.
Caution, carefully proceed to cleaning.
When driving a sponge to rinse in water.

Attention! Use this method only for plastics resistant to mechanical stress.

If we decided to use gasoline, it is better to take the one that for lighters (it is less aggressive and quickly evaporates), but if not, it will come true and the usual car. Perfectly clean pollution. Carry out manipulation with gasoline better on open air Or in a well-ventilated room, away from an open source of fire.

Funds are applied point so as not to damage the surface structure. Pour on plastic, and even more so soak it in aggressive substances it is impossible, the surface can be deformed. It also applies to solvents that will be mentioned below.

Article on the topic:

: water, household chemicals, folk recipes, miracle napkin microfiber; how to wash compound pollution from mirrors limescale, from stickers and markers - read the publication.

How to wash the traces of Scotch White spirit and acetone

Solvents. For example, White spirit or acetone is likely to have in every home. They cope with the purification of plastics.

It is impossible to carry out the processing of painted surfaces with acetone, because It corps paint. An action algorithm when working with solvents or acetone is simple, it consists of three points:

First we wat the solvents of the rag.
With the help of the vehicle, we remove to its complete disappearance.
We wipe the place of treatment with an important cloth.

How to remove traces from the tape with food vinegar and ammonia alcohol

The ammonia alcohol is another means to remove traces from the place of stay of Scotch. Before applying, it is worth checking on a plot hidden from the eyes, how stable the material to it.

Applying funds for the subject, you should lose a slight spot, after cleaning with a wet cloth.

Than from specialized funds you can remove traces from tape from plastic

The market is now ready to offer a large assortment of funds against such, based on the complexity and financial capabilities of the buyer.

Even a line of means for cleaning and removing glue, which remained after an unsuccessful procedure. There are some general recommendations To work with special means:

You need to know that almost all formulations are very aggressive. It is advisable to avoid contact with skin cover. Therefore, before removing glue from the tape, you need to wear rubber gloves.
Sprayed, and some funds are applied to the surface or sponge. After embarking on cleaning. Processing advise only that site that is designed by glue.
From time to time it is worth riding a sponge. The adhesive particles will be removed from the abrasive layer. If this is not done, it will be bored with glue, and will not clean the surface.
On the last stage Clean the adhesive particles scattered in the coils. Wipe plastic with a damp cloth.

How to Clean the surface of plastic to the antiskotch means

The tool is suitable for painted surfaces. The principle of operation is as simple as possible. But should observe precautions when working with a substance:

Apply with a sponge or tampon to the surface.
Leave for 10-15 seconds.
Wipe with a dry cloth.

How to Clean Plastic tools to remove glue traces and universal aerosol cleaners

First of all, you need to explore the instructions of a particular means. Find out if the substance of the surface that needs to be cleaned. It is advisable to apply or spray the tool first on the hidden area. If defects have not appeared, it can be applied to a wide surface. Some funds can only be used at invisible places.

After working with the means containing aggressive substances, it is recommended. Is explained by the fact that in the air is a large number of Volatile compounds that can harm human health. Plastic can lose the shade if it is old and lost color, and the use of aggressive substances led to bleaching. Usually recommended to make the entire surface of white.

The better laundering bilateral scotch

Already several times it was said that it was necessary to clean the plastic very carefully. This is due to the fact that the material is very poorly tolerates the effect of aggressive substances.

Double-sided adhesion to delete is as much as possible. Her hairdryer will help. The second way requires to do it through the substrate, because With direct contact with a hot-sole iron surface may be damaged, therefore, before removing the double-sided tape with plastic, read the small instruction:

The plot to be cleaned should be heated by any convenient way.
Using a stupid knife or rubber spatula, the substance believes.
Laps of glue, which are poorly removed, can be cleaned in the ways listed above.

The better wash the tape from the plastic window

If the previous ways did not work and you still need to know how to remove bilateral tape from plastic, look at the following methods:

Having understood what glue from the tape can not be afraid and use such a universal "fastener" in an unlimited quantity. After all, as popular wisdom says, "if it didn't work out something to scratch well, it means that they took little Scotch."

Article

If the question is solved than laundering the glue from the tape from the plastic, we also consider both the workshops and the store. Cleaning methods can be more or less aggressive, the choice should be made with regard to the degree of limitation / complexity of pollution. The peculiarity of plastic surfaces is high adhesion with different substances. This complicates the cleaning process, but if you act consistently using a differential means intended for such a material, you can get the desired result.

Rubbing bilateral scotch

In the case of plastic products, you need to act carefully, since this material does not always tolerate the effect of aggressive substances. Remove the double-sided tape by heating. Apply a hairdryer or iron. The second of the options implies the need to use the substrate, since, with direct contact with a hot-surface, a part of the adhesive composition will switch to the sole of the iron, and the plastic may be damaged. Sequencing:

The cleaned area warms up in any convenient way within a few minutes.
A stupid knife or spatula believes adhesive.
If the glue bands are poorly rubbed, you need to decide what to remove them. Consider different variants: vegetable oil, toothpaste, White spirit, acetone, solvent, gasoline, alcohol. Any of these substances contributes to the softening of the adhesive composition. The selected means is applied to the napkin and remove the remnants of dirt.

7 ideas than tiping tape from plastic

On the surface there may be stains of different character. This is happening in the case when funds were applied without taking into account the fact of their detrimental effects on the material. Since it is easy to remove traces of tape on plastic, it is not always possible, it is necessary to consider such methods:

Baking soda. It is taken in arbitrary quantities. Add some water. It is necessary to obtain a mixture of sour cream-like consistency. The composition is applied to a polluted area with a rag. With this method, it will be possible to clean the traces of the adhesive and tape on the plastic. If, after the procedure is fulfilled, the contamination is still visible in some places, the actions repeat. When the work is finished, soda is scored from the surface of wet matter. Then you need to wipe the plastic to dryness.
Vegetable oil and soap solution. If you need to know how to remove traces from the tape, it is recommended to apply a bit of oil on a contaminated area. This is done with a napkin. The remedy is left for several hours. It soften, and then killed the glue from the label from the plastic. Fatty film is removed from the surface soapy solution. It can be prepared using washing powder, any soap or liquid for washing dishes.
Stationery eraser or a drill nozzle with similar properties. The first of these methods is less effective, it will not be possible to clean the large area. A drill with a nozzle allows you to remove glue from sticker with plastic and greasy tape. The principle of operation of the elasty is similar to the removal of traces of a pencil on paper. In addition, the fresh adhesive composition rubs away with difficulty, since the substance is partially delayed on the eraser. So, to remove the remains of Scotch better from those sites that have been contaminated for a long time.
The method acting on the "wedge wedge is embroided": impose adhesive tape On top of the old band, slightly pressed, then removed sharply. If you do everything right, you don't have to think than drop tracks from Scotch. Pollution is removed along with the strip of adhesive tape. This method is not suitable for cases when it is necessary to drop the frying glue from the tape. At the same time, the likelihood is great that most of the pollution will remain.
Choosing a method, how to wash the remains of the sticky layer, also consider aggressive means, for example, ethyl, ammonia alcohol. Substances are applied with caution, since they can damage the structure of plastic. It should be checked how the material takes the effect of alcohol. This test is made on the site hidden. If the plastic windowsill was painted, this method cannot be used, since the alcohol remove the layer paintwork. The tool is applied to the subject, you can lose a little contaminated area. Getting rid of tape trails, the surface is wiped with a wet cloth.
Solvent and gasoline. These substances are damaged, with a cotton wand. Such a measure avoids the deformation of the structure of the material. For the same reason, it is impossible to pour the entire surface in aggressive means of scotch. You can use purified gasoline, which is used to refuel lighters. This substance is less aggressive. In addition, purified gasoline leaves the divorces and traces, quickly evaporates. If the stain looked down, the product of plastic can be cleaned with a wet rag.
Soap solution. This method is suitable for small objects (children's plastic toys), since they can be soaked in liquid. The solution is prepared from the household soap. Water is added in arbitrary quantity. Soap must soften, so hot fluid is added. And to remove the tape, the warm solution is used. If you need to remove the traces of the glue from the window sill, you can apply more soapy foam and leave to mock. After some time, the liquid was washed together with contaminants using a sponge.

3 ways to remove traces of glue from a plastic window

If you need to tear up old contaminants, which remained after removing the adhesive tape, consider the following methods:

A sponge with a cleaning surface or a metal, a scraper with a stupid cutting edge or another object, with which it is easy to remove the residues of dried glue. Any of these items will remove pollution with plastic windowsBut the likelihood is that scratches will appear. So that the surface is not deformed, you can drop the remnants of glue or old tape, using some of the funds considered: vegetable oil or soap solution. With these substances it will be easier to wash off plastic by means of a rigid sponge.
Skotcha trails are well amenable to toothpaste. It is applied to a polluted area in arbitrary quantities and leave for 10-15 minutes. The paste penetrates the structure of the adhesive composition, disrupts it, which facilitates the process of removing contaminants. After some time, erase the glue with a dry napkin, then a wet clutter must be treated with a surface.
Steam generator. If the question is solved than laundering the tape from the plastic window, it is recommended to consider the thermal impact method. With high temperature mode, it is much easier to clear items from pollution, which is based on the solar stains of the adhesive substance. The steam generator is directed to the plot where the tape has already been recently located, under the influence of a hot air jet glue softens and it will be easier to remove using a dry or wet napkin. At this stage, anyone described above is also suitable, which will contribute to the facilitation of the cleaning process.

In the desire to remove the adhesive composition with plastic, it is necessary to remember that it is impossible to use abrasive powdered substances and compounds containing acid. Both methods may cause surface deformation.

Special chemicals

Cleaning substance can be purchased in the store. From affordable and effective allocate:

Bingo, Palmyra. The last of these differences is distinguished by a weak abrasive effect. For this reason, it should be applied if you need to remove the tape from inconspicuous areas. With a short-term exposure, weakly abrasive compositions, the product is not deformed.
Cilit, Mr. Muscle - special compositions for cleaning glass and other surfaces. First check how they remove traces from the tape from the plastic, for which the tool is applied to a small site where there is no defect in case of failure. If the procedure provided good resultProcessing a larger area. You need to apply the drug and leave for a few minutes. Then it was washed together with the pollution of a damp sponge.

There is a line of means designed to remove the tape and glue residues that are delayed on the plastic after the failed purification procedure. The most common options:

SCOTCH REMOVER Aerosol. The composition is treated by the needs of the region and after some time remove the adhesive tape. The special composition acts moderately aggressively, so before applying, you should read the instructions in order to understand for which surfaces it is intended.
Mellerud copes well with any types of Scotch.
The liquid composition of Antiskotch (Himbox). It is proposed in bulk packaging, for this reason it is often used on objects that are recently built. In this case, all windows have been cleaned from adhesive tape. The cost will depend on the volume of packaging (1-1000 l).

Considering that most of these compositions are characterized by an aggressive action, work in rubber gloves should be performed.
The substance is applied to the surface of the subject that you need to clean, or first handle the sponge. Then go to cleaning. It is recommended to process a strictly portion that is contaminated with glue / scotch.
Periodically rinse the sponge, so that particles of adhesive composition will be removed. If this is not done, the abrasive layer covers glue and stop cleaning the surface.
At the last stage, the washed particles of adhesive composition are removed, wipe the plastic with a wet rag.

After using special preparations containing aggressive chemicals, it is recommended to open the window and ventilate the room. This necessity is due to the fact that volatile compounds are released into the air medium, the high concentration of which can adversely affect human health. After the end of the procedure to remove the scotch should be examined.

Sometimes the plastic shade changes on the cleaned area. The reason for this lies in the fact that the material is old, lost color, and the impact of aggressive means led to whitening. In such cases, it is recommended to return the bright shade of the entire surface of the subject.

Whatever activity we do, almost everywhere we will find the use of scotch. We chat and warm the windows for the winter, we use when moving and transporting. However, there is I. back side Medals: tape stickiness, due to which traces remain on different surfaces.

Properties Scotcha

Scotch is a strip of synthetic material to which a special glue composition is applied. The latter provides the main property of the means: the possibility of clutch with solid surfaces of different textures. The fastening force depends largely on the thickness of the glue and its composition. What it is more, the in the proportion to the level of the tape stickiness. There are many scotch varieties: stationery, packaging, technical, construction, medical, protective, decorative, etc.

Today in the production of adhesive tape 2 types of adhesive agents are used:

rubber glue;
acrylic glue.

If the tape is created using the first, it can be operated at air temperature from -25 to +50 ° C. A tool on acrylic adhesive is used at temperatures from -5 to +40 ° C. Paper can be applied as a film on which a substance is applied to , PVC, foil and polypropylene tape.

Scotch has the following properties:

Environmental purity.
Strength.
Unlimited shelf life.
Elasticity.
Protective function. Scotch can serve as an insulator, preventing the penetration of odors and moisture.

How to remove stains from sticky tape

For each type of surface, there is a method for removing glue. The faster we take to get rid of it, the easier it will do it. Otherwise, the tape as it were, "bins" to the surface and dub.

Removing traces from various surfaces

From spots left by adhesive ribbon in different sections, you can get rid of the following tools:

petrol;
alcohol;
acetone;
white Spirit;
solvent B-646;
vegetable oil;
eraser;
detergents;
soap;
other tape (using mechanical exposure);
special funds.

Photo Gallery: What do the traces of adhesive tape remove

Vegetable oil is suitable to launder traces from the tape on any hard and leather surfaces (except those that absorb liquid)
If the surface cleaned surface is able to withstand high temperatures, Before removing traces from the Scotch, heat the contaminated area with a hairdryer
Eraser removes footprints on any surface where there is an opportunity to lose acetone able to cope with those cases when the slices of the tape itself remain on the surface of the appliance on the furniture laundry soap Medical alcohol is recommended by many hostesses as a means for cleansing any enamelled technology in the house.
With the help of solvent in-646, you can remove stains of different origins
White spirit will remove traces from the tape from any plastic surface of gasoline will allow you to remove the remnants of the scotch from any furniture
An ordinary dishwashing gel, foamed in hot water, can help get rid of unfortunate stains

If the surface is plastic, then you must first check how aggressive drugs can be transferred.

The easiest I. universal way - This is the use of sunflower oil. Take a piece of bandage or any other not a pile fabric. Jump into the oil and lubricate them the piece of glue we need. You can even pour a small amount of Product on the surface itself and leave for a couple of hours. Here you do not even need to apply a mechanical impact. The oil itself will change the glue structure itself, and we will only remain washed with it with soapy.

Gasoline has the same property. The principle of its operation is similar to the use of sunflower oil. But it is toxic and leaves and unpleasant smell.

Gasoline and sunflower oil work perfectly not only on plastic, but also on glass.

Glass is a steady material, so the use of chemical preparations to remove stains will not harm him

In order not to erase the gloss and the upper coating of the product, the specialists recommend trying both options on a small and inconspicuous area of \u200b\u200bthe surface.

By virtue of its stickiness, scotch sometimes leaves traces on different surfaces. For example, when moving, we fastened the doors of the cabinets and the refrigerator to those found at hand. The painting scotch in the house was not, so the stationery was launched into the move. After his removal, traces of glue appeared on the furniture.
When we removed the spring tape from plastic windows, there were spots from it. In addition, the glue is thoroughly a vacuum and hardened over the winter. In this case, we have helped usual hairdryer. When we sent hot air On the traces of adhesive and held so the device is about five minutes, glue sphuming. After that, it turned out to safely wash the windows with soapy and sponge.
When buying a washing machine and a 1/4 printer, the necessary surfaces were sealed with a metallized sticker. She not only spoil the appearance of the goods, but also prevented the operation of devices. It was decided to remove these stickers, but they left after themselves a thick layer of glue. In the case of the printer, Scotch helped us. Since the glue was still fresh and unemployed, we removed it with a sticky side of another adaptation of this type. Scotch tightly pressed to the surface and cut sharply.

For plastic surfaces, solvents and abrasives can not be used: they can ruin it

There were problems and with dried glue on washing machine After removing the sticker. It was possible to remove only with a hair dryer. Hot air softened the dried glue and the working side of the painting scotch removed the remains.

Remove traces after bilateral adhesive tape will help White Spirit. It will cope with the removal of the scotch itself, and with deliverance from the sticky trace remaining after it. It is necessary to simply be soaked in the liquid an old cloth and carefully lose the contaminated area. After that, remove the track will not be difficult. White spirit is an excellent assistant to remove a stain from bilateral tape from plastic, but for delicate surfaces or painted products, this agent is not suitable.

The most toxic drugs to get rid of traces of adhesive tape - acetone, alcohol and solvent. After their use, it is necessary to thoroughly rinse the surface with soap solution and air the room.

Tried to remove the remnants of glue after stickers with the logo of the goods on microwave oven A tool for removing varnish. Practice showed that the trace is poorly removed, and the cotton disk, moistened in the liquid, sticks to the surface. The same unsuccessful experience was with cleaning plastic drawer In bathroom.

Currently in stores you can buy specialized means to remove traces from Scotch. For example, the megam-s liquids (up to 300 rubles per 500 ml) and Prosept Duty Scotch (about 1800 rubles per 2 liters) have proven well.

Aerosol Duty Scotch effectively removes traces of glue, tape, stickers, markers, ink, petroleum products, oils, fats, resins, soot and soot

Video: How to remove traces of glue from stickers, advertising and scotch

Precautions

Almost all of the above-mentioned means to remove traces from Scotch have chemical elements in their composition. Toxic fluids should be used with caution and comply with such rules:

use away from fire sources;
neoprene or PVC gloves;
do not allow the means to enter the mucous membranes and the skin, otherwise, rinse with plenty of water (it is recommended to use glasses to use glasses to protect the eye);
store in the manufacturer's container with a tightly closed lid at a temperature of from -30 to +40 ° C;
do not allow direct sunlight.

Scotch is a very convenient and useful in everyday life, but after he served his own, you can face certain troubles - the remnants of glue on the surface. What to drop scotch if after use it remains on the surface of sticky traces? What means to take advantage to lick the all-saw stains from glue? How to remove traces from labels on clothes?

What is Scotch?

This is a cellophane or paper tape with a glue layer. It can be like a stronger and weakly affectant, applied on one or two sides. Many problems associated with eliminating scotch from surfaces, we will help you solve useful recommendations in this article.

How to remove traces from scotch?

Depending on the type of surface, which you intend to drop from the traces of glue with a sticky tape, choose and a suitable cleaning agent.

You may be required both firm and special substances. Let us give an example of possible options:

Vegetable oil;
Mayonnaise;
Ammonia;
Alcohol (vodka);
Essential oils;
Detergents (soap, powder, cleaning paste with abrasive effect);
Soda;
Nail polish remover;
Means for cleaning glass;
Dissolving substances (purified gasoline or white spirit);
Furniture cleaning agents;
Scotch;
Blade;
Eraser;
Microfiber cloth.

How to linnet tape from furniture?

Method 1

For polished and painted furniture surface, use a fatty medium. To wash the glue from such a tape, you will suit any vegetable oil or mayonnaise:

Apply a substance on your cotton (gauze) tampon.
Leave for a few minutes let it takes into glue.
Wipe sticky place with a sponge or cloth.
Rock warm soapy water.

Important! This method is universal - it can be used on any solid surfaces, without damaging attractiveness.

Method 2

Excludes Scotch's consequences essential oils. The tool does not leave traces and quickly disappears, leaving indoors a pleasant smell:

Moisten the trail from the tape with essential oil.
Wipe with a paper napkin.

Important! This option will helpget rid of glue from the tape and on plastic windows or furniture.

Method 3.

Use chemicals to clean on unprocessed wood furniture, as the oil will not give the effect or leave the bold. Choosing how to remove glue from the mounting ribbon from the surface, take into service with such substances as: White spirit, gasoline or solvent for removing varnish. Use them as follows:

Water in a solvent sponge (rag).
Apply the substance to the surface.
Carefully rub the glue from the tape.
Wipe the wet cloth.

Method 4.

Universal, but a very time-consuming option for rubbing Scotch with furniture remains a simple school eraser:

Will erase the remnants of glue.
Wash tracks from the rogue with a wet rag.

Method 5.

For soothed spots, use hair dryer or construction hairdryer, as the glue is melted from hot air. If this option was chosen, follow the following instructions:

Carefully heat the hairdryer stain.
Water in vegetable oil rag.
Erase glue.
Rinse the purified surface with soap water.
Wipe the pure wet sponge.

Important! This method is suitable for different surfaces, but use it carefully forplastic windows or furniture. If the material is not heat-resistant, it can melt or will remain yellow stains.

How to clean the plastic from Scotch residues?

Before deciding how to remove glue from the tape from the plastic, appreciate how much qualitative material. Not every type will withstand abrasive products, chemical and heat treatment. Consider the degree of stain levels, as they are much harder and spread out the surface.

Method 1

Apply the scotch itself to eliminate it little plot Surfaces. Use this technology if the remnants of the glue are fresh, so:

Stick a new piece of adhesive tape on an old trail.
Securely lock the ribbon in your hand.
Crop the sharply.
If necessary, repeat the action.

Method 2

When cleaning plastic from Scotch, use and ordinary medical alcohol or alcohol-containing substances (vodka, perfume, cologne):

Moisten a sponge in the medium.
Wipe the surface.

Important! Before use, try the alcohol solution on an inconspicuous area, since different typesplastic React to alcohol in different ways.

Method 3.

Cleaning powders and pasty tools will come to the rescue:

Smoke a sponge in the water.
Apply powder on it.
Caution and circular trituit sticky place.
Wash water.

Important! Forcleaning scotchaabrasive means do not make efforts, you can leave scratches on plastic.

How to drop traces of tape from glass and mirrors?

The glasses or the mirrors in the house can also save traces of the tape. Many love to fix different memo in the most prominent place - on the mirror using such a double-sided tape, and for the winter, the owners of even high-quality plastic windows are often glued throughout the perimeter with paper scotch. Therefore, this problem is quite relevant. You can also cope with it, too, several options.

Method 1

In solving your problem on cleaning a glass surface or mirrors, you will help you tools for windows Mr. Muskul and Mr. Proper, which are sold at any farm store:

Spray a little means on the adhesive sticky mark.
After some time, wipe the glass surface with a sponge.
Wash water or dry the special rag for glasses.
If the glue has not completely retired, repeat the fastest face of the sponge.

Method 2

This option is quite laborious and will require time, but still in the absence of other means, it will be used to eliminate traces of glue with sticky tape:

Take the blade and carefully clean the adhesive traces.
Spools carefully remove the paper.
Wipe the place with a damp cloth.

Method 3.

Effectively act on the remnants of glue from Scotch ammonia alcohol or solvent 646. The procedure for using these tools is very simple, but it will be necessary to protect against fetid odor:

Put the protective gloves.
Water in a solvent cotton disk.
Wipe pollution.
Wash water.

How to wash off tape from clothes?

Maybe someone will surprise the need to remove glue from scotch from clothing, but such a problem is also not uncommon.

Method 1

Fresh stain from tape on clothes can be removed in hot water if the composition of the fabric will allow high temperature:

Soak contaminated place.
Machine soap.
Leave for a while.
Put in the usual mode.

Method 2

In some cases, it is easy and quickly removing glue spots with chemical solvents - just watery the place of pollution and lose it a bit. In order to avoid unpleasant consequences, it is sure to try the remedy on a small piece of fabric.

Method 3.

If the traces of adhesive tapes remained on your clothes, we recommend that you use special tool "To remove labels" UHU EtikettenLoser 48910.