Mosquito net on plastic window: Installation instructions. How to install a mosquito net on a plastic window? How to hang the grid on the plastic window

The long-awaited spring carries with him not only fresh air, which enters the apartments through the open windows. Spring is also the time of year, when it begins (and unfortunately, it continues before the start of cold weather) the invasion of all kinds of insects trying to take a place near the person.

Swipped windows, unclosed ventilation channels are a front door for mosquitoes, flies, and sometimes bees.

The natural solution arising from the desire of a person himself chooses those who have the right to be in his apartment, became the invention of such a simple, but indispensable addition to the windows, like a mosquito net.

Protective grid for windows and doors PVC

In the wooden windows of an old sample, the entire warm period of the year was opened. The owners of apartments in order to prevent insect penetration into housing and leave the poplar fluff on the other side of the window, attached to the statement of gauze. It turns out that the mosquito net is a new accessory from a series of "well forgotten old".

On the principle of operation, it ends total that there is between the modern mosquito net and gauze on the old windows.

Plastic windows that have received widespread distribution and universal recognition, for the most part open with the entire sash or folding it into an oblique position. This led to the need to refine the gauze option to the requirements imposed by modern conditions.

Adjusting to these requirements, I had to make a mesh of an easy, interchangeable, imperceptible from neither the room, nor from the street.

The framework on which the grid is stretched is also made convenient: it can be disassembled and in such a form to postpone storage.

For one season on the grid, so much dust is going that if you do not wash it off, then not only mosquitoes - even fresh air can hardly fall into the room. The collapsible frame and here it is very useful: removing the grid, it can be quietly rinsed as the same gauze.

The door to the balcony, which in the summer (as well as the window) is quite often in the open state, has always been a separate headache in terms of combating insects and a pop-colors. But here, a competent solution was found - this is a swing mosquito net.

A similar swollen option is a mosquito net, stretched on the frame size frame. doorway. For rigidity, the frame is enhanced by one or two crossings. In principle, the swollen mosquito net is a prototype of the door, only this door is designed to stop not people, but insects and street dust.

For wide doorways, where there is no way to install the frame, invented a protective grid, rigidly fixed from all sides other than its touch of touch with the floor. In the middle of such a grid, there is a cut, which, passing a person or an animal, itself flashes tightly thanks to the magnets at the edges.

It would seem that it is impossible to come up with something else, radically different from the standard sample of a mosquito net, stretched on metal carcass and fixed with hard attachments on window frame. So I came up with a swollen option, here made a mesh on magnets, and that's it? No, this was not stopped by an inventive design thought.

Protective nets for windows in the form of roller shutters or blinds appeared on sale. Such structures can not be removed by depositing in winter. It is enough to twist them into a roll, and they will be able to stay in such a position until the need to be needed to be applied again.

Unfortunately, not only mosquitoes are trying to get into the room through the window and doors. Sometimes a mosquito net, fixed on the door or window opening, becomes a barrier for a cat or a dog living in the apartment. In the fight against these representatives of the animal world, a mosquito net suffers a complete defeat.

But even on this issue, smart heads were working, creating a mosquito net with a protective polyvinyl chloride coating applied to it. Such a grid, due to its purpose, received the corresponding name - "Anticress".

Mosquito net assembly instructions in video:

Varieties

Mosquito nets are not just mesh on the window that protects against bloodsowing insects.

According to its functional abilities, they can be divided into several types: the standard, most often used frame mesh, stretched on the aluminum frame:

• a grid representing a rollreplied by guides fixed on the window frame;
• swinghaving a loop and opens by the type of ordinary doors. Can be attached both on the door or window frame and in the window or doorway;
• mesh on magnets. It is installed in the doorways and does not interfere with the passage of man and animals;
• grid folded in the form of harmonica in a special case - "Plisse";
• grid with a special anti-vandal coating;
• grid that protects against penetration into indoor dust. It is recommended for installing indoors where people who suffer from seasonal allergies on the flowering of different plants live.

If you briefly determine the main types of mosquito nets, the list will look like this:

• framework;
• rolled;
• pliste.

Methods and fastening means

Because exist different kinds Mosquito nets, it is natural that they came up with them different methods Fastening to the carrier-based basis.

These methods may look like:

• a variant at which the size of the mesh frame coincides with the sash size. This frame is attached to plunger pins;
• if the frame is greater than the rumble in the frameIn which the sash is located, then it can be fixed from the outside of the frame on special ears. Previously, the ears themselves are screwed to the frame with screws;
• the second option fastening the frame size is greater than the sash - on the hooks that are fixed on the frame itself and when installing cling to the frame;
• horizontal guides fixed on the window framefor which one or two frame mosquito mesh can move, freeing the window opening;
• rolled mosquito netsare installed on the top of the frame and unfold, moving along the vertical guides fixed on it;
• sliding mesh on magnets can be fixed on the frame with a tape;
• frames can have curtains and attached on the frame, opening free access to the room;
• mosquito systems "Plisse"with a complex fastening, the device of which can be trusted only by a specialist.

All these fastening methods can be systematized by the main decisive features:

• attachments on plunger pins;
• on the croups;
• on the ears;
• on scotch;
• rolled system with fixed vertical guides;
• framework with horizontal guides;
• system "Plisse".

Mosquito nets wearing additional features (for example, "anticress") are commonly used in a standard framework and necessarily have several additional mounts. This is done in order for the animal that can use the grid as a support, not fell along with her to the street.

Almost all the variants of mosquito nets installed on plastic windows are suitable for use for aluminum and wooden windows.

With a clear diversity of the types of grids and embodiments, it becomes difficult to determine which mesh is best to install in this particular case.

To answer this question, it is necessary to figure out which functions should be performed in the form of a mosquito net.

If you just need to prevent insects in the room, the standard framework option is the cheapest way out.

In cases where it is necessary to close the sliding balcony frames, it will appropriate to use that frame option, in which two mosquito nets move horizontal guides, changing each other in places on the type of cabinet sash.

If there is a danger that the grid can damage the pet, then the option with an ordinary grid must be replaced by a grid of high strength.

How to contact

It would seem that the main purpose of mosquito nets is the protection against annoying midges, but it is only one of the functions performed by this type of protective devices.

Mosquito net, among other things, can even serve as a regulator of air flows entering the room through open door and window processes. If there are grids in the apartment on all windows, then with the wind gusts, they will stop the speed of air, protecting the tenants of the apartment from the danger to get a cold illness.

In addition, there is no bit from where the dust layer appearing on the furniture will almost stop appearing if there is a grid on the windows, designed to prevent the appearance of mosausek and mosquitoes, but also having an additional anti-pink function.

Allergies such a kind of mosquito net will help not only to make his apartment cleaner, putting the penetration of garbage and dust with a reliable barrier, but the most important thing - will help preserve health, leaving the cause of allergic reactions due to the window.

The only condition for the full implementation of the Mosquito net "Antipul" of its main purpose is to stop the penetration of small pollen flowering plants, Periodic care for its surface.

To do this, it is necessary to wash the grid itself with soap solution and only after complete drying to install on its place. If the grid is installed without giving it to dry, then the dust will immediately pour it on it, scoring all the cells, and the cleaning process will have to repeat again.

A certain time through which the mosquito net with the antique function has to be removed, no. It all depends on how quickly this mesh loses the opportunity to freely skip air. In cases where the room in which the meshs of this species are installed on the lower floors of the buildings, and the trees are growing or a lively track is growing, it is often rushing.

How to install it competent

The easiest and most affordable method for installing a mosquito mesh is the fastening of it with hooks. The hooks themselves finished version It is already fixed on the mesh framework, and the entire installation process is only in the positioning of the frame in place, where it is supposed to be, and turning the hooks to the position perpendicular to the frame.

No tools and special devices are not used.

The device of all other ways of fastening, more precisely, fixing their elements is best to entrust professional installers.

The "Plisse" system, in which unfolds, taking a working state, a mosquito net, without the use of special tools and skills cannot be made.

Fasten the ears on the frame from the outside is also not easy. After all, for this you need to accurately calculate the amount of admission required for the free output of the carcass between the upper and lower fasteners.

Yes, and the process of twisting the screws, pressing ears to the frame, will have to do, half leaning out of the window opening.

With similar difficulties, you will have to face the installation of horizontal guides for the sliding frame.

Even for the mosquito net device with plunger pins, you need a correct calculation for the markup of the exact location of their installation and the tool that you can drill the grooves for fixing the pins.

Video instructions on the method of removing mosquito net with a plastic window:

How to remove without any problems?

In order to eat and install the grid, they did not become a problem, the methods of its attachment need to choose the most comfortable. Such as, for example, fastening with hooks or on plunger pins.

Mosquito mesh frame, which is attached to the frame balcony doors At the curtains, it is also removed using a simple action. To do this, it is enough to raise the side of the frame where the loops are located, and they will easily come out of their mounts to the frame.

Since the grid that is used on the doorways has to constantly close and open, then special handles have been attached to it. For tight fit on the frame, seals are installed, in which the frame itself is fixed.

On the grids of the frame type, fastening on the ears, hooks or pins in the frame from the inside, plastic holders are inserted, allowing you to hold the grid when it is installed on your place.

To remove the grid, standardly fixed with the outer side of the frame, it is necessary to lift it so that the lower horizontal frame of the frame left out of the lower ears, then the bottom of the frame should be outlined and lowering, display the frame from the upper ears. The released grid can be returned to the room.

To return to the room a grid, fixed on the hooks, you need to turn the hooks along its axis to the position along the frame, not forgetting at the same time to hold it for plastic holders.

The grid on plunger pins can be quickly removed by simply pulling the pins head so that they come out of their nests. The released mesh should again not forget to hold, so as not to run for her to the street.

Mosquito nets that move along the horizontal guides, despite the seeming complexity, are released from the guides simply as with the embodiment on the ears. In the same way, it is necessary to lift the frame and bring it out of the bottom mount - it allows you to make a gap, which is between the frame and the top guide.

The most difficult in terms of dismantling are mosquito nets of a roll type and a mosquito system "Plistes". Their periodic service has to do without removing from fasteners.

How to fix without mistakes?

If you decide on an independent installation of a mosquito net to fasten the "ears", then first you need to take the necessary security measures when working at an altitude, since you need to work halfway by advanced from the window. After marking on the installation of fasteners, you need to pick up screws of such a length so that they are screwed only in plastic and did not rest in the metal frame inside the profile. The length of optimal screws should be no more than 20mm.

There are guides for the movement of the frame, which are attached with the help of bilateral scotch. In this case, you need to make a markup especially carefully. If an error is assumed, the second time to fasten the wrongly installed and once dismantled guides will already be impossible.

In case, after all plastic profile The holes were mistakenly drilled, they need to be frozen. For this purpose, special liquid plastic applies. But if this material is not, you can close the holes in conventional white silicone.

About installing mosquito net without pvc pens window in video:

Fastening options

The first option is the easiest and safest., Guests are provided to the owners of the premises, the windows of which are at the height of free access from the outside. To implement this option, you do not need to risk, sticking out of the window. It is enough with the help of a stepladder, applying the grid to the frame, to note its contours and relative to them to fasten or ears or guides.

The second option is that you can immediately screw the attachments immediately, but by planing bilateral scotch, with it to install them on the marked place and check the accuracy of the installation markup. These actions protect the profile from the appearance of holes left due to erroneously applied marks.

The most reliable option is to attract specialists to the device of mosquito nets. Such a service is in the complex together with the installation window provided that the installation of a mosquito net is included in the list of measures marked in the contract.

If the need for a mosquito grid appeared after a window or door was installed, then, as a rule, manufacturing firms are provided to the installation of their specialists.

Is it possible to install yourself?

Problems arising from open doors And windows, make many people take measures to eliminate them.

The easiest way out is to tightly close the discouragement. But instead of some problems come others, sometimes more serious than dust and mosquitoes.

On the walls of the room there is a mold and fungus: they always rush to get out where there is no good ventilation. Microwing, available when installing almost all plastic windows, cannot be eliminated this trouble.

Options for dealing with poor ventilating space only two:

• single in the window profile of a special air valveproviding sufficient air exchange indoors;
• installation on an outdoor door or window mosquito netwithout preventing air movement and eliminating the problem of the open window or door.

The light and durable mosquito net does not violate the general view of the window or door, which is attached, because the color of its frame can be selected for the color of the profile. In order for the grid itself, it is mainly released by light gray, although options are possible at the request of the customer.

If you wish, you can easily get the mesh itself from the frame. To do this, you need to pull the rubber sealing cord, which is inserted into the groove on the inner part of the frame-frame. This cord is fastened by the edge of the grid, not letting her slip out of the groove.

Having delivered the grid, you can disassemble the frame itself, with force pulling the planks in the joints of the joints.

Due to the fact that the framework is collapsible, it is not necessary in case of damage to the canvas itself buy a new product. You can buy a new piece of canvas and insert it into the old frame.

If it was decided to do without the help of measurers and installers, before proceeding to measurements, you need to carefully consider how plastic window Located relative to the outer slopes.

Sometimes deeply recessed under the upstream window profile does not allow you to place the "ears" fastenings on it. For this, there is simply no place.

The same trouble can be expected if it was decided to install a rolled mosquito net on a side profile, which is almost completely hidden under the side slopes.

If the profile departs from slopes to a distance that allows you to fit any of the types of fastening, then you can begin to the next step - measure the framework of the future mosquito net.

For the frame that will be attached with the help of "ears", you need to measure the width and height of the opening, in which the sash is located, and add three centimeters to these sizes - this will be the desired size of the mosquito net frame. Complete with the frame must be fasteners and screws for fixing them. If there is no screws, then you need to find such in order to meet two requirements: they must be made of stainless material, and their length should be no more than 20mm.

A set of "ears" fasteners consists of four pieces: two of them differ from the other two in length. Those attachments that are less than the regiment are put in the bottom of the frame, and those that longer hold the top of the frame. This is done so that the gap in the upper "ears" allowed to raise and take the bottom of the bottom frame.

The magnitude of this clearance must be measured very accurately - it is he who is responsible for how reliably mosquito net keeps in his attachments. Also correctly calculated the gap will make it possible to easily put and remove the grid.

For self-installing mosquito net, it is best to use the option with fasteners. All hook installation actions can be made indoors because the hooks are attached on the most framework of the mosquito net. The finished mesh will only be able to carefully install in the window by turning the hook and turning them around its axis.

Tips for using mosquito net on PVC windows in video:

Does it make sense in the installation?

It cannot be said that the mosquito net is the most necessary invention for a person, and it cannot be done without it. It is quite possible to hang on the gauze window, and on the doorway there are plastic ribbons that scare away any living crop. This is probably cheaper than buying and installing a mosquito net. But the whole question is whether such methods will be effective and are comfortable as much as possible and convenient for the same mosquito objectives, or correctly speaking, a mosquito net.

It is also necessary to remember that in addition to the main function (not to put in the premises of the winged insects), there are also additional functions with which this grid is successfully coping with. Among them: the ability of a fine canvas to keep small dust formations, restrain the draft, stop domestic animals from the flight through the open window.

Any of these features is already in itself a worthy of establishing a protective mosquito net to the window or door.

Unlike the ancient methods of the type of gauze or ribbons on the window, the mesh canvas is practically not noticeable in the open window out. Plus, the grid is a reusable product convenient to use, which has options that meet different requirements.

The grid can be in the form of a roll, in the form of a harmonica, be simply stretched on a frame or with magnets for fixing for a passing person (grid on the doorway). Those who wish can always choose to suit each option.

And at the same time, it requires minimal care - as it is contaminated, it is necessary to rinse with soap solution, and this is an entire simple care procedure.

Phased installation

The best version of the mosquito net device will be set it complete with a plastic window. A separate decoration of the order and the departure of the specialist will cost more than comprehensive services. In addition, the sellers of plastic windows often have shares by which the mosquito net can be obtained as a gift.

But if you have to order the manufacture and installation of the grid after the plastic window took its place - this is also not a big problem. In this case, their advantages will appear. The distance from the glass to the side and upper slope will indicate what kind of mosquito net (frame, rolled) and which type of fastening is better suitable for a specific option.

In order to order a mosquito net and independently install it, you need to consistently take the following actions:

• release the windowsill and the window through the outsiders;
• open the window sash and determine which part of the upper and lateral slopes is not closed by external slope. If they have a free distance from 3 cm, then you can proceed to measurements;
• in advance the cooked tape measure should accurately extort the distance of the face in the frame in which the sash is located;
• it is best to give the size to handle manufacturers of a mosquito net. They will accurately calculate how to change the data so that the finished product fits perfectly into the window through the opening. This option is good when the customer does not exactly know which type of fasteners it is better to choose. For each fastening option there are your tolerances to the main size. But if it is decided to carry out calculations yourself,
• then for the fastening method with the help of "ears" you need to add three centimeters to the resulting height and width of the width;
• in order for the finished product to fix on the window frame, first need to make markers corresponding to the installation places. The location of the two lower fasteners should be such that the lower edge of the mosquito net installed in them is one and a half centimeter below the outline of the sash;
• from the lower mounting shelves, you need to measure the distance to the shelf of the upper mount. This distance should be greater than the height of the mesh frame per centimeter;
• at the resulting marks, you need to install fasteners with a prerequisite that attachments, in which the shelf, pressing a frame, smaller in length is mounted at the bottom of the frame. For fixing fasteners, it is necessary to use stainless metal screws.
• The mesh installation itself does not represent special difficulties. To do this, it is necessary, securely fixing the grid for plastic holders, insert it first into the upper mount, lift up to the stop, and, pressing to the frame, omit into the capture of the lower mount. If the tolerance between the fasteners was calculated accurately, the mesh frame will take the place intended to her without any problems.

About the types of mosquito nets in video:

Mosquito net and installation on the window

To determine which of the existing technical means is best suited for stopping trying to penetrate the house through the flying insects window, you need to understand the range of the funds offered.

For this purpose, it is possible to use fumigators, special light instruments, destroying insects, sticky ribbons and much more. However, each of these means of fighting annifies have their own minuses: Fumigators can negatively act on aquarium fish, light instruments consume electricity, woven all over the house sticky ribbons from the flies. It is unlikely that someone will deliver aesthetic pleasure to someone.

But there is a competent solution to this in every spring of the current issue - this is an installation on the path of insect barriers in the form of a mosquito net.

Sometimes on the windows of residential premises, mosquito nets can be seen even in the winter period of the year. This does not mean that the owners of the apartments forgot to remove the grid for storage. The grids on the windows are needed at any time of the year, because in addition to the protection against insects, they carry other functions. Such meshs may not only be inserted into the room, but also not to release from it (for example, a cat or hamster, which stroll through the windowsill at the time when the owner warms the room).

If the mesh canvas is covered with a special protective composition of polyvinyl chloride, then it can be forgotten not for one year, leaving in the window frame.

After all, look at the street, it practically does not interfere. Mosquito net becomes noticeable only if it does not care for it and allow it to be covered with a layer of dust. But this problem is easily eliminated with water with soap.

If there is no need to use an anti-allergenic version of the mesh web with a shallow cell size of 1mm 2, then can be used with a hole with holes in 3mm 2. This will significantly increase the time between the moment when you need to take care of the mosquito net.

Mosquito nets may differ from each other not only by the canvas cell, but also the shape of the cells. It is believed that the canvas in which the cells of the rectangular shape are worse than skipping light and air, but stronger to break and cheaper at cost. A web with hexagonal cells is recommended for use in those places where the gnus and small midges are spread. This is explained by the fact that the hexagonal cell passes light and air twice as much as the same in size is rectangular.

It is difficult to install the mosquito net on the frame only for the first time, since you need to perform several actions on the exact markup and the subsequent fastening of accessories that lock the mesh frame in accordance with the selected mount type. For this reason, it is better to seek help from specialists who, by installing the grid, will explain the owner all the conditions for its further operation.

You can not ask about assistanceIf you use the easiest way to install, it does not require measurements or a special tool.

Mosquito cloth, not stretched on a metal frame, gave the name to a new method of installing mosquito nets - frameless. One side of the velcro is glued onto the window frame and connects with the other part of the canvas glued along the perimeter. This is the whole process, the complexity of which is only that the tape on the window coincided with the ribbon on the canvas.

For entrance doors

Requirements for door mosquito nets are very different from those that are installed for window grids. The door grid must freely skip people and animals, while blocking the path of flying insect.

Since the requirements for these grids are different, then the approach to their attachments on the doorway is also somewhat different.

For this purpose, you can use grids equipped with magnets - they do not make it difficult to pass people and are an excellent obstacle for insects.

Such mosquito nets are attached to the door frame of the plug on the side and upper sides. The bottom of the grid and the location of the passage have two-polar magnets, with which the edges of the grid, passing the person, climbs them instantly.

There are other methods of mosquito nets on door loops.

One of them is called "Plisse". This method consists in folding the mosquito cloth in the harmonic and fixing it in a special box. This method is used for large overwhelms, close that can not, apply other approaches to a mosquito net device.

A more common mesh door closing is to install on a door frame frame with a tensioned anti-mosquito web, which is attached to the frame with special curtains.

The disadvantage of this option is the short service life, since the aluminum frame can be easily damaged.

And at Pleisse, and in the swollen version of the mosquito net there are two common serious disadvantages compared to the mesh on magnets. While a person enters, he needs to spend a few seconds to open and close the sash, and sometimes this time is enough to penetrate those whom the grid must stop.

Mosquito net do it yourself

There is an emergency solution to the problem of getting annoying insects in the room, if suddenly an unforeseen situation occurred, and a mechanical damage was removed from the window with a mosquito net and could not be put on its place.

To do this, it is necessary to get a canvas from the frame, pulling the rubber cord that locks the edge of the canvas. Then remove the sealing gum from the window frame. In the released groove you need to insert the edges of the canvas and secure their linen rope. You can not doubt that the canvas is suitable in size, because the mesh frame is only a little more of the outline of the sash.

In the event that there is a ready-made grid in working condition, but the attachments that must hold it are not yet fixed, the following actions should be taken:

• tracing the frame to the outlet that it should cover. If it is 1.5 cm on each side, it hides behind the frame and does not rest in the external slope, it means that its size corresponds to this window turnout;
• place a place for the lower mounts having a short clamping shelf so that in the consequence there are enough space to raise the frame up to 1 cm and at the same time it did not rush into the slope;
• place a place under the upper attachments so that they turn out to be above the frame on 1 cm;
• after the markup process you need, observing security measures, set the attachments to the place intended for them.

After that, it remains only to put the grid in the mount by holding it for the special holders installed on the sides.

The mesh installation task is noticeably simplified if you need to fix the grid with z-hysteries. First you need to find the main charge, which should be the first to cling to the frame. The main is the longest, it must be on the short side of the frame. This hook should be started at the top inner protrusion of the window frame, while the mosquito net frame should be from the outside of this protrusion.

Further, securely holding the frame, you need to turn the lower hook of the window frame of the window frame and lower the frame down. After the frame is on its place, you can fix it with a turn of the side hooks.

Installing the mesh on the balcony frame

Mosquito net can be installed on the outside of the window - these are methods for fastening with the help of "ears" and "hooks", as well as the "Plisse" systems and rolled grids.

It is allowed to install the grid in the frame - fastening on plunger pins.

The only way to attach the indoor mosquito mesh installed on the frame is in the openings with sliding frames. It is determined by the fact that this kind of frame does not have protruding handles that can damage the mesh cloth.

As a rule, two frames are installed on the balcony, which can move, changing each other places. For their movement on the inside of the frame, two guides with two grooves are mounted in each. Inside these grooves, mosquito nets, moving along the entire length of the balcony, can occupy any place.

Due to the fact that the installation of the guides is available on the side of the balcony, the installation of this type of fastening of mosquito nets is not considered too complicated. It can be performed independently, just correctly placing the place where the guides should be attached.

Door mosquito nets

The main difference between the two main types of grids closing the doorways in where the canvas is in or without it.

The mosquito canvas is considered a framework if it is a component of the plread system or stretched on the frame, which is attached to the veins on the door frame.

Representatives of frameless mosquito protection are grids in which the edges of the cut after the passage of the person are connected to each other with magnets or velcro.

Frameless grids are easy to install and are convenient to use, which cannot be said about the framework samples of the door anti-mosquito protection.

To put an additional door from the mosquito net, you need to take action similar to the installation of the door canvas in the door frame.

What type of fastening is the most optimal?

Everything existing methods Applications of mosquito nets meet the main goal - block access to the room of small insects. In order for this function to be executed 100%, all types of mosquito obstacles are developed, the essence of which was described in detail above.

The most popular framework mosquito nets are those that are attached with the help of hooks and z-shaped mounts ("ears"). They are easily installed and also easily dismantled. An affordable price also plays a big role.

The mosquito net of a roll type will be more expensive, and the installation will not cost it without the help of a specialist.

Purchase and installation of the "Pliste" system is the most expensive pleasure in a number of milestone devices, but at the same time the most convenient.

The cheapest barrier for mosquitoes is a frameless velcycloth. But after several removal from the window for cleaning from dust, Velcro stops sticking, and the question of how to protect the room from mosquitoes, becomes relevant again.

We must not forget that mosquito nets can carry and additional functions - help allergies to survive the flowering of plants, and can also stop small homemade livestocks from traveling.

Determine which type of mosquito net is better than others, you can only carefully read the affordable materials On this topic, or after reading this article attentively, in which there is all the data for analysis.

With the advent of plastic windows, their manufacturers began to let the additions to them and mosquito nets appeared. Their destination is to delay the penetration of insects and dust in the apartment, when the windows are open. Make a mosquito net with your own hands is very simple. Below is an example of an installation on a plastic window.

Installing mosquito stacks do it yourself

Before dealing with the installation rules, you must select the grid of a specific design. It happens the following types:

• frame - the most common and cheap grid, which can be both removable and sliding. This is an excellent option if you do not intend to constantly remove and install the mosquito net back.
• plunger grid - For its attachment, special corners are not needed, it is mounted directly into the window opening.
• mesh on velcro - its installation occurs from the inner side of the window, so if necessary, this mesh is easy to remove.
• roll mesh is one of the new inventions. The kit includes a guide profile, a grid in a roll and a plank for reliable fixation.
• if the roller grid is stacked by vertical, the view of the mosquito net of Plears should be made horizontally, while it can be shifted into the harmonica, and not constantly remove and dress.

Install the mosquito net with your own hands on the plastic window is very simple. It all starts with the assembly of construction. The grid profile itself must accurately approach the window size. For the reliability of the attachment, the plastic frame is additionally up and down and the aluminum profile is fixed. After you mounted a profile, it can be attached to the corners, which are also made from PVC. You need to pull the fixing cord around the perimeter of the entire frame and secure the grid on it. For convenient installation, almost on each form of mosquito net there are knobs that are allowed to fix or remove the design.

Installation of a mosquito net on a plastic window design will avoid various problems with insects, which in large numbers appear in summer.

Only high-quality and correctly installed grids will ensure the necessary comfort and safety.

To the question of how to install a mosquito net on a plastic window with your own hands, you can answer that the procedure for assembling such a design and attachment of the accessory is quite simple, and even the person who has no experience in doing such work can cope with it. In this article, readers will be able to find the necessary advice on how to mount the mosquito net correctly and what nuances should necessarily keep in mind.

Constructive features of mosquito net

Before starting the installation of the product, it is important to get a complete picture of the mosquito mesh design. As the main elements, the following can be distinguished:

• profiles: frame, angular and improvised;
• connecting corners;
• fastening cord;
• plastic and metal holders - 4 pieces.

In addition, it will additionally need special accessories for fastening mosquito nets and the necessary tools.

Using such a product, you can forever forget about harmful and annoying insects, as well as, on the use of fumigators and repellents that are not entirely useful for the human body.

In order for the mosquito net to be an effective insect protection tool, it is important that the product is installed correctly, without any deformations.

Advantages of using such designs

As the main advantages of the mosquito net, some parameters of such a design can be distinguished:

1. Mosquito nets are very convenient to use. The products are very simply installed and also quickly and easily removed.
2. The grid can be washed using conventional soap and sponge.
3. The design looks elegant and neatly, thanks to which the interior will not be spoiled.
4. The grid perfectly protects the room from the penetration of various insects and even from the rain droplets. At the same time, the product does not obscure the view from the window and does not prevent admission fresh air.
5. The design is strong enough, because metal elements and fiberglass are included in the frame.
6. The material is not deformed and does not fade in the sun.
7. The grid is very compact and in case of inappropriate, it can be stored in any convenient location.

Varieties of mosquito nets

Disassemble how to put a mosquito net on plastic windows will help the type of product design. Only in the presence of an idea of \u200b\u200bwhich kind of grid has been purchased, it will be possible to properly assemble and install the design.

The main types of design are as follows:

1. Frame - most simple and affordable. The grid can be removable and sliding. This option is perfect for installing a grid in a room where it does not arise to constantly open the window. If the grid is large, then an additional reinforcing plank is mounted in the middle of the design.
2. Plunger grid refers to framework structures. The product is not attached to special corners, and immediately mounted in the window opening.
3. Design with fasteners in the form of velcro or scotch. This option is also the easiest and mounted on the inside of the window sash, which allows it to be easily removed in the future.
4. Type of fastening for a balcony that has a size of a standard door and fixed on the loop. During the opening of the door, the grid opens with it. In the closed state, the design is fixed using special magnets.
5. Rolled mosquito net, which refers to new products in this area. The design includes a special guide profile and a grid fixed in a roll. Al across the plank is located on the principle of flights. In the open state, the grid is in the box under the door. This type of construction is suitable for large-sized window openings and for balconies with glazing.
6. Mesh-Plears, externally similar to a roll construction, but differs in that it moves horizontally, while going to the harmonica. The grid can be additionally decorated with various drawings and decorative parts.

Mosquito net fastening nuances

Installation of a mosquito net on the doors and windows of plastic is not particularly difficult, however, when performing this work, you will need to consider several important moments. You can use one of four for fastening the design. existing options Fasteners:

1. Plunger - the most expensive mount, however, and the most reliable. This option is perfectly opposed by influence. external factors. Externally, the plunger is a long item from a metal that can be adjusted in length. Additionally, special springs are used. With such fixtures, the grid is easily and quickly removed, and then, it is put on again. This installation option is suitable for any type of window.
2. The least reliable type of fasteners is the option "Checkbox". For fixing in this case, special plastic hooks use. Unfortunately, with a strong wind, such a mesh can easily break.
3. Metal corners are also a reliable fastening that is densely adjusted to the frame. Products have additional fixation from the inside of the room.
4. Plastic corners are considered the most popular type of fastening. They are placed on the outside, while keeping the window design. The grid, if necessary, is easily removed, and the whole design prevents the normal closure of the window.

Main Mounting Order on Plastic Window

Installing a design can be done with your own hands. To properly perform all necessary work It is worth using the attached instructions and the first thing that will be needed is to make a protective product.

Even before the assembly and purchase of the grid, it will take measurements of the window opening, so that the acquired product corresponds to these parameters, and it could be fixed.

Most often, the size must correspond to the overall dimensions of the window opening. This can be checked by opening the sash and measuring the opening.

First, we prepare the framework for which, cut off the frame profile strictly in the size of the window opening. Additionally, the crossbar can be installed to impart stiffness. It is extremely important here to take into account the ratio of the height of the opening to its width. The lower and upper parts are amplified by a special profile - an adhesive, made of aluminum. This increases the strength of the product and guarantees the long-term preservation of their qualities. After the profile is ready, you can apply corners to assemble the frame. As a rule, the corners are performed from durable PVC, which protects the design from the deformation and makes it more stable.

At the next stage, the mesh is tensioned on a special fixing cord, which from the inside is fixed in the opening of the frame. As a result, the cloth is reliably stretched and it can be fixed finally. After that, special metal elements are installed on the frame in the form corner profilewhich is necessary for fixing the cloth in the window opening. At the final stage, two special handles are joined to mosquito protection, which will allow secure the grid in the window.

For the process of installing the grid with plastic mountIt is necessary that the design is already assembled. It is important here to take into account that the width of the finished protection should be wider than the window for 2 cm, and above - by 3 cm. Included with the stack itself, there is a special set of fasteners - two upper and two lower ones. Fasteners are fixed on the frame and fastened. It is important to comply with the installation sequence, because you first need to fix the lower parts, and then determine the placement of fasteners at the top. In this case, the grid is inserted into special grooves, and then simply attracts to the frame without using additional means of fixing the canvas.

Conclusion

During the fulfillment of the simplest procedures, the performer can get a qualitatively established reliable protection From harmful insects and even from the smallest particles of dust and garbage. Due to this, the air indoor will become cleaner and safer to the health of people living in the apartment.

Often, situations happen in life when there is a need to establish or change the mosquito net. The need for replacement, usually, occurs in families with children, the rate loves experiments, and therefore damage mosquitoes are inevitable.
For those who are not familiar with the specifics of mosquito nets for plastic windows, the installation of a new product turns into a real blood pressure. To get rid of many hours of torment, we offer several ways to install. We recommend reading the article carefully, and save in bookmarks or print. If necessary, at hand there will always be a hint.

The warm season is the time of the activity of all kinds of insect species. Intentently or not, they seek to get into the houses of people through doors and windows. Ancient flies, mosquitoes, spiders and beetles bring many inconveniences. Therefore, it is obvious that everyone is looking for the ability to defend. Mosquito nets come to revenue, or as they are called mosquito people. These parts allow fresh air to freely penetrate the room and protect against insects. Thus, you can constantly leave the doors and windows open.

Mosquito for plastic windows: firmly and reliable

IN modern world It is impossible to submit a window without a mosquito net. Thanks to her, people are delivered from annoying insects and a poplar fluff filling the room. A simple and little noticeable design, combined with functionality made mosquito nets an indispensable accessory in the interior.

A simple design and convenient shape of the attachment allowed mosquitoes to become the most popular addition to a new plastic window.

In the summer I want the house as much fresh air as possible. But open window openings cannot provide a full air circulation. Previously, exit from this situation did not exist. Purchase a protective accessory for balcony doors did not exist. We had to do with subright means, such as gauze. Manufacturers drew attention to the needs of consumers, and developed special grids for balcony doors. They have a swollen mechanism, and without problems fit in the doorway of any type.

The hosts of pets are familiar to the situation when the first sun rays lure cats to the balconies. There they are hunting all day on flying past birds, and then love to "scratch" claws about the mosquito net. And no matter how try, explain to the animal that it is impossible to do this. Loves will try to squeeze the grid.

Often you can see the birds that are circling near the window, trying to pull the stuck mosquito or midge. This phenomenon, especially often, can observe residents of the upper floors.

Given the wishes of customers, manufacturers have developed a special model of the grid "Antikushka", with enhanced pVC coating. The substance used in the production of this design does not harm human health. And it is not inferior to ordinary meshes in air bandwidth and light. At the same time, the "anticress" protects against mosquitoes, midges and flies, as well as from solutions of salts, alkalis and basic acids, industrial gases and moisture.

Special technology processing mosquito net makes it very durable. It is almost impossible to damage or scratch the product. Now you should not worry about what your pet is falling out of the window. And birds wishing to enjoy midges made in the grid do not violate its integrity.

None folk remedySomehow the smell of anise, carnations or eucalyptus does not guarantee one hundred percent protection against mosquitoes. Welcome forever forget about night buzz can only mosquitoes.

Care and types of mosquitoes on plastic frames

Each owner wants that the windows on the windows served as long as possible. To do this, adhere to simple rules for the care of them.

Before you purchase a mosquito net, you need to carefully carry out measurements, and determine the size of the product. To do this, open the window, measure the lighting light. After, add to each parameter for another 20 millimeters. The result is the desired grid size from insects.

• For doors. One of the new developments. They perform the function not only in the insect protection, but also regulate the flow of air flow. In addition, the mosquito for doors is guaranteed to save the house from drafts. Fix similar products on special loops. The grid is fixed using a magnet.
• Antikushka. This type of grid is needed by domestic owners. Especially for such consumers, this model was developed. Due to the fact that the favorite will not be able to damage and spoil the product. In addition, this type of mosquito is equipped with additional fasteners, which increases its safety. This grid is not required to take off for the winter, since the increased strength of the grid makes it capable of withstanding the most tall frost.
• Antiple. Today, allergic to dust acquired the scale of the epidemic. The disease is distributed to people of all ages and segments of the population. Keep yourself and close to unpleasant symptoms will help the Mosquito net "Antipul". The product is created on the basis of very dense tissue, which is able to delay the smallest dust particles. However, this leads to rapid pollution. But mosquitoes are cleared very simple. All that you need is to wash the surface of the mesh with soap solution, after which we wipe with a dry cloth.

The grid does not affect the penetration of sunlight into the room, and does not worsen the appearance of the window.
The lack of the grid is one - high cost.

• Rolled - for many, this is considered the most optimal solution. The advantage of the grid is its multifunctionality, they are used to close windows and doors, terraces and balconies. As a collected form, they look like a roll in the box. An additional advantage is simple care for products. The installation process is also as simple as possible. But the main disadvantage of such a model is a high price.
• Sliding - can be used to protect windows, as well as balconies and terraces. This type of grid opens and closes with two sliding parts. Closed mosquitoes do not affect visibility from the window, due to gray. To mount a sliding grid, you will need to install special guides.

There are various types of fasteners for mokut grids:

• Antiple;
• Frame removable;
• Antitox;
• Frame sliding;
• Magnetic tape or scotching;
• Pile;
• Rolled.

Speaking about mosquito nets, you can not forget about the types of their attachment. There are 4 of their kind:

• On loops;
• With ears;
• On the meal pins;
• On z - shaped fasteners.

The greatest popularity (which is quite justified) uses the last fastening option.

Z-like fasteners are reliable and comfortable. Another "plus" is that there is no need to make additional holes in the window frame. The use of this attachment is permissible for wooden and plastic windows. Lack of fasteners - a loose fit of mosquito to the frame. Clearances gives the opportunity little quantity Insects and dust penetrate the room.

For mounting the pins will have to do holes in the window frame. Thus, fasteners are very reliable. With the help of such mounting, the mosquito fits tightly to the frame, and stainless steel elements guarantee many years of fixing service. If necessary, the grid is quickly removed and dismantled.

For doors, the best option will be fastening on the hinges. For this, due to increased load, an enhanced type of profile is used.

An unambiguous answer about what kind of fastening does not exist. It is necessary to take into account the place where the installation will be carried out. For windows from plastic, it will take eight screws and four fasteners. First spend measurements. After that, non-burning fasteners are mounted equally from each other. Corner parts are installed at the corners.

Mosquito dismantling is also very simple. In order to remove it, take the plastic holders, and carefully, but with the effort pull up. So, the grid comes out of the lower holders. After that, it is rejected, and remove the top. After that, everything you need to do is hide the mosquito net in the storeroom until the next summer.

Obviously, the removal of mosquito net is not difficult. The process is very simple, even when the procedure must be carried out with a plastic window. To remove the grid, there is no need to ask for help from professionals. Even a person who has no experience can cope with the removal of a mosquito net.

Installing mosquitoes on the windows

We all face the problems of warm season: flies, mosquitoes, midges; Duchot; A poplar fluff and dust in the house. It is difficult to find a solution for all tasks immediately. The fight against mosquitoes and other insects is inextricably linked with the appearance of excessive stuffiness, and vice versa.

Starting from spring and to late autumn in an open window, all sorts of insects are continuously flown.

Previously, the only solution to the problem was Marley. It was mounted in the door and window frames. But thanks modern technologies, get rid of midges, and provide regular air intake, designed mosquito nets on frames for windows.

These products represent heavy-duty structures. They are installed in the vents and window Operm. Mosquito design is very easy. This makes it possible to consolidate them with the help of the so-called grooves designed specifically for this purpose. In addition, all grids are equipped with special handles to simplify the installation process.

To install the window grid from insects, you can use the services of a professional from the window firm or do it yourself. The procedure is very simple. The only difficulty that usually occurs from non-professional - installation of grooves. In the future, mosquito nets will be attached to these details.

Frame for mosquitoes produce from a special aluminum profile. A grid that will directly protect the house from insects, attached to the base of the product with a rubber lace.

An obstacle to the penetration of insects into the house is very small lattices on the grid, their standard size is 1x1 mm. Mosquitoes are aesthetically fit into the interior of the room, and do not spoil the general view of the window. Products provide unhindered circulation of air flows and penetration of sunlight.

Additional advantage is the ease of caring for a grid, a prostate of removal and establishment.

To please customers, companies offer classic colors of mesh: gray, white and brown. At the request of the customer, the mosquito can be performed in any other color.

Having bought a mesh on the windows, you will forever forget about insects, dust and a poplar floss in the house for many years. Products are not deformed under the influence of external factors, do not fade.

The mounting mesh on the window is produced using one of two types of fasteners. The choice will be driving the customer's desire, and the quality of the window mounting.

Correct installation of mosquito net on the window frame

Although the grid installation does not require special Knowledge, some nuances still need to be considered. To begin with, take the mosquito for the handle, located on the side of the product. After, it is necessary to start long fastenings (the so-called hooks) for the influx of the window frame. Now, lift the mosquito upwards. At the next stage, slightly pulling the mosquito net on itself, and at the same time, we start the hooks for the influx of the windows. Lower the mosquito on short attachments located below. Installation is made, it remains to hold the mosquito on the window opening.

Before installing, think about fasteners. Z - The shaped corners are considered a practical and reliable option for mounting the window grid.

How mosquito mesh is attached

• The installation begins with screwing with screws to the upper mounts. The size of the screws should be no more than 20 mm. When using more long-length products, they may continue to reinforce that is inside the PVC window.
• If the distance from the edge of the influx to the slope exceeds 50 mm (this is considered an ideal option), measure the influx from the edge of 50 mm on both sides. In the appropriate places, put the pencil marks.
• After, according to the early markers, attach long fasteners, and secure them with screws.
• In cases, the distance from the edge of the influx to the discovery is 50 mm, but more than 30 mm, it is necessary to determine the minimum distance, measing it from the edge of the influx on both sides. It should be started from the installation of the upper z - shaped corners, after which the lower should be installed. In this case, experts offer two possible types of installation.

Instructions for Entry Mosquito Mesh on the frame

Mosquito net must be removed every year for the winter season. In order not to resort to the help of specialists, you need to master the simple dismantling technique.

First you need to take a mosquito net for the handle, with a little effort to pull. This process should continue until the lower hooks will not leave the clutch with the influx of the window frame. When this stage is over, put forward the window grid and lower down. Ready. Now you need to make a mosquito to the room where it will be stored.

As you can see, installing and disassembling mosquito nets will not be difficult, even for an inexperienced user. However, it is still necessary to have some skill, therefore for residents of the upper floors, the procedure may be dangerous. Since it is necessary to get out of the window to the installation, at the fixation of the corners on the screws.

First option

This option is applied in cases where there is no possibility to get to the window frame from the outside to make the corresponding marks necessary to set the grid.

You need to start with the installation of upper mounts, while you need to carefully carry out the measurements of the product. After that, add 27 mm to the results obtained. The resulting length is noted from the end on the upper mount to the bottom. Now, lean fastenings directly to the marks on the frame, and secure them with screws.

When the lower and top are fixed, you can start the mesh on the frame. To do this, take the grid for the handle and start it for the top fasteners. After, you need to lift the grid slightly, and at the same time pulling the product to the frame, and lower the mosquito to the bottom mounting element. On the last stage Adjust the position of the mosquito net and align it.

If even after you read the above instructions, the mesh installation seems difficult, it is recommended to refer to the specialists. In addition, buying a mosquito net, you can immediately order the installation service.

Second option

This technique is applied at dachas and houses; In the apartments located on the first floor or if both sash are opened in the window. These requirements are due to the need to sew the outside of the profile from the outside.

It is necessary to take a mosquito, and install it in the attachments located at the top. Next, we raise, and lightly sending to yourself, lean the bottom of the grid in the frame. At this stage you will need help. Since simultaneously you need to make a mark on the window frame at the edges of the mosquito net.

Those who intend to apply this method should be taken into account that in the process you need to fix the grid using the upper holders. Next, measure 27 mm, after which you can make final stamps. According to them, screw short holders with screws.

Install the mosquito net yourself

With the arrival of spring and heat, people try to keep windows constantly open. However, it inevitably leads to the appearance of a large number of insects in the house: flies, mosquitoes, moths, butterflies, beetles and ants. They interfere with sleep at night, and bites cause itching and discomfort. In addition, such "neighbors" are often peddled to hazardous diseases.

The only way out of this situation, today, is the installation of a mosquito net on the windows.

The innovative design of mosquito nets protects not only from insects, but also from dust, poplar fluff and birds to the room.

The mesh frame is made of durable, ultralight aluminum. Usually, it has the color of the window frame, but at the request of the client, it can be painted in any color. And the grid itself, most often, has a light gray color. Thus, it does not stand out, merges with the scenery outside the window, and does not distract attention.

The device mesh against insects is very simple, and the installation does not require special knowledge and skills, so everyone can perform it. Therefore, if the mosquito net was damaged or worn to start it should be removed. To find out what kind of mosquito size is ordered, you just need to measure the old product. A new protective grid for windows of the required size, you can easily get in a profile store or in stock.

If the earlier window was without a grid, it is also possible to carry out measurements, although it will be more difficult to do it. To do this, you will need to open the window opening, after which the perimeter measurements are carried out. 3 cm in height and 2 cm in width are added to the results obtained.

The kit, except for the grid, includes more attachments two pairs of fixtures for the upper and lower part of the window frame. These details differ in design. The top fastener is slightly wider and has a bar. Therefore, it is impossible to confuse fastenings. However, the complexity is a reliable fixation and proper fixation on the windows frame.

The lower part of the fasteners are shown from the outer part of the frame. For reliable fixation of the product, fastenings should be below the window opening by 1 - 1.5 cm. The other mount is fixed to the upper impact.

To correctly define a place for fasteners, you should add 1 cm to the grid parameters.

The further installation process will not be difficult. In order to insert a mosquito net, it is required through the open opening to pull the grid on the outdoor side. After that, it is inserted into the upper fixing groove. This is done through the move, during which the mosquito is attracted into the inner side, and at the same time falls down.

For owners of wooden windows, there is also the possibility of mounting the anti-moskit grid. However, in this case, it is important that there were no protrusions outside the window frame (as they lead to mosquito damage), and the sash opened out.

For fastening mosquito nets there are two options:

1. In the first case, the z-shaped fasteners are used, which are attached from the outside. The first are the top items, and then the bottom. Works are carried out on the outer part of the window frame. Therefore, this method is considered dangerous for life and health if the work is carried out at high altitude.
2. For the second option, the inner fastening is characteristic. This technique is also pretty, simple. It is that mosquito, with the help of the handles, starts behind the upper window opening, and in this position it is done until it stops. When this process is completed, the attachment of the bottom is started behind the influx of the window frame. Now, it remains only to bring the grid to the lower mounts with confident movement.

The final stage in the first, and in the second cases there will be a mosquito alignment, and checking the density of its adjacent.

Do I need to install an anti-mosquito net on the windows

In the spring year it is impossible to keep windows closed. The heat makes the windows and doors on constant ventilation. However, all sorts of insects penetrate with refreshing air flows into the room. They, annoying buzz, do not allow to relax at night. In addition, their bites cause unpleasant itching and redness. No less harmful, familiar to everyone, mole. Although harm to health it does not cause, but spoils things from natural fabrics. The anti-moskit grid will be protected from pests.

The standard mosquito net is a frame of a light profile of aluminum, it serves as the basis for which the material with fine holes is attached - an anti-mosquito cloth.

Thanks to light gray color, which is painted with a mesh, product, almost inconspicuous for the human eye. The profile color corresponds to the shade of the window frame. Thus, although the main function of grids is protection against insect penetration into the room, the aesthetic component is also inherent in products. In addition, mosquitoes protect against dust, pollen, poplar fluff, this fact is especially important for people suffering from allergies. Be sure that the house will not fall into the house, leaves and other trash carrying by the wind. Thanks to modern developments, the grids protect domestic pets from falling.

Another important advantage: Mosquito nets do not require any special care. Throughout the entire period of operation, it is necessary to clean the product with soap solution Twice a year: at the beginning of the season of use - in spring and autumn, after removal.

To remove the mosquito, it does not require any special knowledge or skills, so the care for it is simple and does not take much time. It is simple, and the process of fixing the anti-arine mesh, can be able to cope with anyone who has led to such a goal.

To cleanse the grid, it is not required to purchase additional funds and tools.

For those who do not have extra funds, there is an option independent manufacture Mosquito. The process is not too complicated, and fast. In addition, the way it will be much cheaper than ordering products in a special workshop.

Today, you can install a mosquito net on any type of door and window opening. The installation process, depending on the size and complexity, takes from 30 minutes to an hour. However, the full cycle of the work of this type, for metal plastic windows takes up to two days.

In cases where the mesh is already on the window, but it was worn out, it is very simple to order a new one. To do this, make measurements of the old product, and buy the grid of the same size. In such cases, it is not necessary to buy new fasteners.

When there is a need to order a grid, the main question becomes: "Where better to buy it?". Many believe that the best way - Contact the company where the window was purchased. Such a statement is true, but the purchase of the product in another profile manufacturer is as possible.

And for those who want to save, there is another option. To do this, find a wholesale warehouse that sells components for physical and legal entities. In such organizations, you can buy an anti-mosquito net at times cheaper.

detailed instructions

Those who set new plastic windows, but for some reason did not order a mosquito net for it, it will be much more difficult to carry out measurements. But the following instruction below, the task will simplify.

• To begin with, you need to open the window to which you intend to close the mosquito;
• It is necessary to measure the length and width of the open window frame;
• To the results obtained, you need to add 3 cm to the height indicator, 2 cm to the width;
• When the manufacture of mosquito nets you intend to entrust professionals, the company must ensure not only finished product, but also a set of fasteners for him.
• The fasteners consist of two pairs of details, various designs - for top and bottom. The upper mount is a little wider than the lower, and has a bar. During the installation process, it is very important not to confuse the details.
• Fastenings should be properly located in the opening of the window frame, and fasten them well.
• The lower fasteners should be from the outer part of the window frame. It should be placed in view of the fact that after mounting the grid should be 0.5 cm below the opening.
• The upper fastening parts, respectively, we have in the upper part of the frame.
• To accurately determine the location of parts, it is necessary to measure the height of the mosquito from the lower mounts, and add 1 cm to the result.
• If all previous steps are made correctly, insert the mosquito mesh is very simple.
• Pull the product outward window opening. Insert it in the grooves of holders from above. At the same time, slightly attract the grid on yourself so that it fits tightly to the frame. It is necessary to do this while the grid will not be strengthened into the lower mounts.
• It's not difficult to install a mosquito net on a wooden window. But in this case, it is important that the window sash discovered in inside, and there were no protrusions and gaps from the outside. It is important that the grid does not break during installation work.
• To date, there are two options for fastening the mosquito net on the frame. Their choice depends on the desire of the owner, and the quality of the window mounting.
• The first method involves fastening the grid to the plastic window with the help of internal mounts.
• In the process, the products are taken for special handles on the side, the field of this, the upper "hooks" is set for the influx of the windows. The mesh field is up to the stop.
• The next stage is to start the lower "hooks" for the influx of the window frame. Lower the mesh down on short mounts.
• When the main works are completed, the anti-mosquito net is equalized relative to the opening.
• Another consolidation method proposes to use z-shaped parts from the outer part of the window.
• To begin with, the upper mounts are fixed on the screws.
• Measure 50 cm from the edge of the influx on both sides of the window, and mark the results with a pencil or marker.
• Focusing on the marks, mount the long mountings, and fix them with screws.
• Choosing screws, it must be remembered that their length should be less than 20 cm. If the product is greater than Dina, there is a chance that the screw is reinforced into reinforcement in the pestle window.
• When the top fasteners are finished, proceed by installing the lower. For this there are two options.
• One case is used when it is possible to get to PVC profile from the outside.
• Mosquito net is inserted into the upper mounts, after which, attracting the grid to themselves, raise it, and lean the bottom to the frame.
• While one person performs the above-described actions, the second, makes marks on the edge of the window. These marks serve as indicators where you need to fasten short attachments using screws.
• Another option is used when the ability to get to the outer part of the window is impossible.
• As in the previous case, the upper mounts are first fixed.
• Now measure the size of the mosquito net, and add 2.7 cm. The resulting result is measured from the end of the upper attachment to the bottom, the mark is made in the appropriate place.
• Fastening are fixed with screws.
• We take a mosquito net on the frame for the side handles, we will start the top fastener. After, raising low part Mesh to the frame, up to the stop and bottom fasteners.

As you can see, the process is not particularly difficult. In total after a few hours of work, fresh air will freely penetrate the room, and you can forget about flies and mosquitoes forever.

The last method is considered the most reliable and practical option. But the newcomer will be difficult to fulfill it, because it requires certain skills. Therefore, sometimes he may be dangerous to human health. Since in the process of assembly work, it is necessary to hang out from the window to fix the corners of the screws.

How Moskitka is installed

Mosquito nets tightly entered life. This is a great way to protect the house from annoying insects, without overlapping, with constant streams of fresh air. We are ready to tell about how to quickly install mosquito nets on windows and doors.

Installing a mosquito mesh on the window

To mount a mosquito, in addition to the product itself, you need to have a set of details for fixing: it includes four fasteners and as much screws of self-tapping screws. Usually, these products are included with the grid.

Put the mosquito on a flat surface. Make measurements and corresponding marks.

The angular fasteners are mounted in the corners of the frame. Not angular details are fixed in the center of the window frame. During these works, keep the smooth distance between all the details.

Fasteners intended for tops are mounted above the upper corners of the grid, observing the distance of 12 centimeters. Such technology will provide a mosquito sufficient space for the entrance. To fix the fastening elements on the self-tapping screw, the screwdriver is used.

Remove the grid from the plastic window is also easy. For this, you need to take on plastic holders that are in the middle of mosquito. Neat motion lift it up vertically. When the grid comes out of the lower hooks, the bottom is removed back from themselves for several centimeters. Next, do not rush to lower it until the mosquito comes out of the holders from above. In the last stage, place the product into the room.

Various fastenings of mosquito nets and their features

General principles of installing and fixing the mosquito net on an aluminum window are almost similar to previous installation cases. However, still exist some features:

• The grid is started in the frame for the upper guide.
• Having achieved the maximum position from above, boil the bottom edge of the sash behind the lower guide.
• Now you can lower the product.

Usually, even for non-professional, the total installation time of the plastic window design takes no more than 30 minutes.

Standard mesh models on the frame are mounted in a few minutes - with the help of fixing to the window frame with special latches.

Installation of structures with z-shaped fasteners, takes a little longer, within 10-15 minutes. However, the process itself will be more complicated.

For whom the reliability of fasteners is important, we recommend paying attention to metal details. Such products are not cracking, they are not damaged, and they are not terrible frost and summer heat. In addition, unlike plastic analogs, metal fasteners will not allow the grid to fall out even with hurricane gusts of the wind.

Not so long ago, mosquito nets of the ratio type appeared on the market. Installation of such products without professional assistance is not recommended. But, if you still intend to do it yourself, it is recommended to perform work together. It will help quality work, and will save from the loss of parts.

Installation of anti-arine mesh per door

Today, antitomarine nets on the doors of balconies and veranda are mounted using special magnets, and the use of the clamping mechanism. Before starting work, you need to note the places where the loops will be fixed. Next they are fixed on doorway With the help of screws or screws. Next, you need to fix the grid against insects on the hinges, and consolidate it with the help of magnets.

The last step of installation of the mosquito net on the doorway is fixation on the door profile of magnets using self-tapping screws.

Installation of anti-mosquito net on plastic windows

Flies and mosquitoes turn into a real problem in the warm season. The easiest and most convenient way to combat insects in the house is to install mosquito nets on the doors and windows. How to mount a mesh against insects on the window prem, as well as the doors of the terraces and balconies, you will learn below.

Self-mount mosquito net on the window

If your mesh from insects has included z-shaped mounts, you must perform the following sequence of actions:

1. Put the mosquito vertically to, at the same time, the attachments have been facing your face. It is important to take into account that the attachments are often different depending on the length of the hook of this part.
2. Next, set the grid so that the tap of the larger fastener is turned upwards, and smaller down.
3. On the side of the grid there are plastic or metal handles located vertically. Firmly grasp them.
4. Put the mosquito in a specially designated place, to install stacks in the window opening.
5. Raise the grid as high as possible, and make a large hook from above behind the window frame.
6. When the mosquito is in the highest position, get smaller hooks beyond the edges of the window opening below. Lower the grid.

This is the easiest option of mounting the mosquito net. However, it is possible only in the case when all necessary details are available. It is necessary to take into account the fact that this method is not suitable for all types of plastic windows.

Method for fixing the mosquito net in window opening

Another equally popular way to fasten the mosquito net on the windows, as well as on the balconies, with the help of special plastic corners.

Although this option is not suitable for all cases, if you plan to install mosquito on the plastic window, this option must be studied in detail.

In this case, in contrast to the variant with the metal fasteners, where they are installed on the mesh frame, they are fixed directly on the window frame.

The process involves the following sequence of actions.:

• Conduct measurements of the window opening and frame on which the grid against insects is attached;
• On the outer part of the window frame, with a pencil, all the necessary marks are made. At the same time, the calculations need to be done with a slight margin.
• Using screws, lock the corners on the window frame;
• Further actions correspond to the installation stages in the cases described above. Mosquito is fixed in the window opening using the upper and lower hooks.

Install the mosquito net on the door

Unlike products designed for windows, door mosquitoes are divided into two types:

• Those that are in a special building representing the frame;
• Free hanging mosquitoes.

Before you take on the installation of a mosquito net yourself, you need to consider that this type of work is more difficult than installing a mesh on a plastic window. This is due to the fact that when the grid is configured, they are counting on the work of professionals, and man without experience will be difficult to understand. Therefore, work on the installation of the anti-mosquito net for doors is recommended to trust the specialists, it will not only save time and strength, in the event of a marriage, the product will quickly be replaced with a new one.

As an example, you can consider a mosquito with a frame. This type of product is attached with hinges, which resembles ordinary doors. In contrast, mosquito nets on magnets are attached all over the perimeter of the doorway, with the help of special magnetic fasteners.

Sometimes a magnetic latch and handles are included with the mosquito net. In addition, if the height allows, you can install several imposses.

For a professional mosquito netting on the door takes no more than 15 to 30 minutes.

The peculiarity of this type of mosquito nets is twisting during removal from latch or opening. The presence of such a function eliminates the need to twist the product manually and significantly prolongs the life of the product.

You already know how to install an anti-mosquito net on the window or door, what kinds are there. When it comes to the simplest design of the mosquito net, the installation is made independently. Work will take no more than half an hour. However, the installation of complex structures is recommended to trust professionals. Employees of a specialized company easily implement installation in a short time. It will save your nerves, and do not have to worry about the reliability of fixing the design.

September 21, 2016
Specialization: professional in construction and repair (full cycle finishing worksuch as internal and external, from sewage to electrician and finishing), installation of window structures. Hobbies: Watch Column "Specialization and Skills"

Fastening the mosquito net on plastic windows is usually performed at the final stage of installation: this item has a very simple design And installed without special difficulties. And yet, if you do your own work, you understand the nuances of choosing the type of fastening and the method of fixing the product on the window is definitely worth it.

Design and purpose of mosquito nets

The anti-mosquito net, which is attached to the PVC window, most often is a skeleton product:

1. The mesh frame is made of light polymer (PVC) or aluminum. Plastic structures are characterized by less durability, therefore more and more manufacturers are moving to an aluminum profile. In this case, a special coating protects aluminum elements from external influences.
2. On the corners, the frame elements are connected by special corners. Due to this, the rectangle of the frame is preserved, since plastic inserts give the product the necessary rigidity.

1. A grid is tensioned on the frame, which is made from the synthetic canvas (the fiberglass is most often used). The grid is most often fixed in the profile groove due to the elasticity of the special cord, because if necessary, the damaged canvas can be removed and replaced by the new one.

Typically, the canvas is painted in gray. Neutral coloring makes sense: It is in this case that the mesh interlacing is least noticeable at any level of lighting.

1. From the inside, two knobs intended for installing the product and extract it from the opening are recorded on the mosquito net. Plastic handles in 90% of cases disappear after about two years of operation, and the designs made from the polymer strip, rolled into the ring, serve as a little longer.

As follows from the name, the mosquito net ensures protection against penetration into the placement of flying insects - flies, mosquitoes, etc. The cross sections of the holes in most grids are selected with such a calculation so that their size is less than the wings of the most common insects.

In addition, installed in the window opening sash or on the frame of the construction window with stretch canvas ensure the shading of an apartment or a balcony. Despite the high transparency, the mesh material effectively absorbs the sun's rays, because the grid heat up to the grid, especially in the absence of curtains and blinds.

There are many options for fixing "Music" on the window

Installation techniques

Method 1. On the loop

An unambiguous answer to the question of how to fix the mosquito net on the plastic window, probably does not exist. There are several fastening systems, and each can find both dignity and disadvantages.

The first, and the obvious installation method - the installation of the mesh on the loop:

1. For such a technique, it is necessary to make a design from a special profile. On one side of the frame placed loop groups (two or three, depending on the height), and on the opposite - the latch retainer.

1. When installing the stack we apply to the frame outside and noting where the loops will be located.
2. Then we install the retractable pieces of loops on the frame.
3. Design we put on a loop and fix the rod.
4. We wear a latch on the response element and close the grid, noting where the latch will be.

1. We set the latch on the frame, fixing it from the outdoor side by self-draws.

It is very convenient to use this product: if necessary, the mesh simply swallows on the rotating hinges and the opening opens. But there are some restrictions:

1. First, the dismantling of the product for the winter is characterized by consideration - you need to discontend the loops, which is not so simple.
2. Secondly, it is impossible to use such designs on windows with installed outer lattices - it simply has nowhere to open the grid.
3. By personal experience I will add one more nuance: with lateral wind, directed along the wall, the latch can open, and then the grid swallows. As a result, a couple of canvas sometimes breaks with loops.

Method 2. On Pockets

More simple, more reliable, but at the same time a little less functional attachments for mosquito nets on plastic windows are the so-called "pockets". They represent plastic structureswhich are fixed on the corners of the mosquito net frame.

Installation of pockets is extremely simple, but there is a small trick in it:

1. Fastening is best done until the frame is mounted in the opening. So we can perfectly set all the details, and otherwise we will have to fix the design "to the eye", which often leads to errors.

1. We start mounting from the bottom pair. To do this, take two pockets with low facial sidelights and fix them with self-draws with such a calculation so that the top edge of the mosquito frame profile coincides with the top edge of the frame itself.
2. After that, insert the grid into the lower guides, and then we neatly lift up - so that the bottom edge of the frame is over the front wall of the pockets. Now we note the position of the upper edge of the frame on the top transverse part of the window frame.

1. A couple of pockets, equipped with larger sides, install so that the raised mesh freely log in to the resulting groove (we make a reserve at a large side by about 3-4 mm). This on the one hand provides reliable fixation of the design in the established position (i.e., when it relies on the bottom pocket), but it makes it possible to extract the grid from the grooves.

After installing the window in the opening, the grid is put in the pockets very simple:

• first we get the frame into the upper pockets until the stop;
• then press the bottom edge of the frame to the window;
• and put on the supports of the lower pockets.

Of course, it turns out longer than on the hinges, but to remove the grid is easier.

Method 3. On the "Flags"

Another fastener for mosquito nets on plastic windows is the so-called check boxes. They are not very convenient to use, but it takes the least place:

1. The checkbox is a miniature detail: either a Z-shaped plate of thin metal, or a M-shaped rotary element from dense PVC.
2. Metal flags are most often put directly on the profile frame (it should be aluminum, since the self-sore makes up from PVC immediately). Plastic products are attached to the frame close to the edge of the mesh installed in the opening.
3. For mounting one frame you need 4 -6 flags.
4. The checkbox works very simply: we turn each element using self-sufficiency as an axis, and press the frame flag. Due to this, the grid is fixed in the opening at several points.

1. If necessary, the design is extracted according to the same scheme: the flags turn so that they become parallel to the parts of the frame, and then remove the product.

When you turn the flags, the bridge must be kept behind the handles, otherwise it just falls out.

However, this attachment has a significant disadvantage: turning the flags are inconvenient due to their small size, in addition and plastic, and the thin metal serve not long. Yes, and self-tapping screws fixing the fastener of the mesh frame, too, sometimes burst "with meat". In general, the option for those who take the mesh from the mounts to the maximum time per year.

Method 4. on Velc

Frameless insect grids also exist, moreover, it is completely easy to use them. As a rule, a pair of lipuchki is used for attaching such a design:

• one is fixed on the window;
• and the second is sewn or welded around the perimeter of the mesh canvas.

There is a simpler option when the mesh cloth is attached directly to the sticky tape on the window, but it seems to me less reliable.

Installation instructions will be like this:

1. A window designed to set the grid thoroughly wash, removing pollution and fat stains (they are formed where we touch the plastic with our bare hands).
2. Before attaching the grid, wipe the window dry.
3. With Velcro, remove the protective tape, exposing the adhesive layer.
4. We apply the product to the window and fit well, trying the tape from the first time correctly, without folds and "waves".
5. After the tape with the velcro is pasted, we attach the mosquito mesh cloth to it. Such a product is well, and it is removed literally in a few seconds.

The disadvantage of this method of fixation is not the highest reliability: no matter how high-quality velcro, according to the strength of the fixation, it is still inferior to mechanical fasteners.

Rollets, plungers and other options

There are several other options for fastening the mesh dense in the window opening:

Type of fastening	Design features
Plunger	The grids on the plunger mount have a practically standard design: a canvas of fiberglass or PVC is located in a plastic or aluminum frame: Plungers are embedded in the frame itself - spring-loaded rods, which in normal condition go beyond the edges of the frame by about 15-20 mm. When the mesh is installed, the frame starts inside the window, the handles of the plungers are delayed and the rods are cut into the profile. After we release the handle, the plunger comes out and fixes in the hole pre-drilled in the frame. Such a fastening is distinguished by reliability, but minus is the need to install the structure inside the frame. There is an option to attach plungers into the holes done in the nod, but in this case the relatively thin layer of plastic will experience serious loads.
Rollet	Probably the most convenient, but at the same time - the most expensive option: Outside, a rollt with mosquito canvas is installed, side guides, as well as lower hook. If necessary, we just take over the cord and stretch the grid from the rolling part, with its base goes downwards down the guides. At the bottom of the base, the base is fixed with a latch, which holds it in the desired position. If necessary, the mesh is easily removed - it is enough to remove the base from the latch and slightly tighten the grid up. The obvious minus is the high price of the product, in the rest, it is extremely convenient and very reliable.
Plisse	The protective grid-pls on the principle of action is somewhat similar to the rolling, but it is not moving in the vertical, but in the horizontal direction: On the one hand, a guide is installed with a fixed web, on the other - the guide with the latch. The folded grid (hence the name is Plears) is attached to two horizontal polings - top and bottom. When closing, we simply drag for the handle, and the grid is gradually unfolded. Then in the extreme position we fix a stretched cloth with a latch. Remove the grid from the opening as simple: we remove her edge from the latch and gradually fold the material "accordion". The minuses include not the most dense overlap of the opening due to a small provision of material, as well as the high cost of the product. But for a balcony door or wide window - really very convenient option.

Caring for grids

Mosquito structures can be installed on the most different types Mounting, but still, when operating, it is necessary to adhere to quite defined recommendations:

1. The mesh canvas over time loses elasticity, because even with minor mechanical loads. The perforated canvas is much worse coping with its functions, therefore it is periodically (every five or six years) change.
2. To extend the life of the canvas, the grid should be dismantled for the winter period. I usually remove the designs in October and return to the place in March. Thanks to this, neither profile nor the canvas are processed, therefore it is an order of magnitude longer.

1. After removing the design, it is worthwheeling - for the warm season it collects an incredible amount of dust. If your windows go to the road, then I would advise rinse the grids more often - every two or three months.
2. Finally, you should not forget that this design is not intended to protect against falling. No mount can withstand a significant weight load, because if your house has children or active pets, then the sash with a mosquito glass installed only in a folding position.

I do not get tired to repeat: to protect children from falling, the window opening should be blocked. To do this, it is installed either a special handle with a key or a lock on the bottom of the frame. It does not interfere with the ventilation, but from the turning opening of the sash with overly curious hands will save!

"Antikushka" is not a panacea, but can help

1. The exceptions are only the grids "Antikushka", which differ in reinforced web and more reliable fasteners. But they can not withstand the weight of the remedy Maine Kun or little childThat is why it is better to be restrained, not bringing to trouble!

Conclusion

Of course, it is not necessary to apply absolutely all methods for fastening mosquito webs, you will not become - it is not necessary. But to understand the assortment of products and study the method of their installation is definitely worth it.

September 21, 2016.

If you want to express your gratitude, add clarification or objection to ask the author - add a comment or tell me thanks!