How can you cover the ceiling in a wooden house. How to sew the ceiling in a wooden house - the frequency shows the best ideas. Heat ceiling from above

Use of wood as building material gaining increasing popularity. The modern house from the tree is not just a structure from the logs and boards. First of all, it is a style that implies both the appearance of the house and the design of the premises inside.

Walls made of wood look well and perfectly held warm. Ceilings B. wooden house They have no less important, they must match the common style, have a decent appearance and at the same time be no less warm than walls.

Requirements for materials for finishing ceilings in a wooden house

Wooden house ceilings have their own constructive features And they are lightweight structures from beam overlaps and flooring, assembled from the board. The space in the intervals between the beams is usually filled with thermal insulating material.

The ceiling finish must be easy, retain heat and provide sound insulation.

Basic requirements for the materials for finishing the ceilings in a wooden house:

Safety. It is necessary that the materials for the ceiling finishes were strong and reliable, and also corresponded to the requirements of fire safety and did not allocate harmful substances both in the usual and in the heated state.

Durability. The longer the finishing material for the ceiling without the need to repair, the better.

Appearance. It is necessary that the materials for the ceiling finish are harmonized with the walls, creating a single design and making rooms with cozy and attractive.

Ceiling in the living room of a wooden house, trimmed with wood

Preference should be given to natural materials that are able to provide sufficient air circulation inside the ceiling design. In addition, it is an important combination of finishing material with a common room style.

Preparation of the ceiling construction to decoration

Preparatory work includes antiseptic processing of ceiling design elements. In rooms with high humidity (bathroom, kitchen, bath) It is necessary to additionally treat the surfaces with special moisture protection means.

Do not forget about fire resistance. For this, the tree is impregnated with special compositions that prevent the burning. The same processing is necessary to subjected to the finishing material from the tree. This will significantly increase the service life and will prevent the possible deformation of the decoration elements.

Before sheening the ceiling, it must be inspired. For this, any thermal insulation materials will be suitable. Warming can be made from the inside, hiding heat insulation under the trim or on the side of the attic.

The preparation also includes a gasket of wiring and other engineering communicationsIf they are not conducted in the construction process of the house.

Materials and their features

Choosing how to sew the ceiling in a wooden house, it is necessary to take into account not only the quality and cost of materials, but also the overall style of design of the premises. Sometimes the ceilings in wooden houses are not separated from the inside at all, leave both and insulate on the side of the attic. Open beams on the ceiling will help create a unique style of a village house, for example, one of the directions of the country.

If the thickness of the timber or log used during the construction of the house allows you to do without internal warming and decoration, the wooden ceiling will be perfectly combined with the walls. In addition, wood has unique properties: it absorbs excess moisture from the air and gives it if the air becomes too dry. In addition, the tree is well holding heat and is a good insulator noise.

The most "running" material for finishing the ceilings - wood. For additional ceiling, the following materials can be applied with wood:

• veneered panels;

If the house is insulated from the inside and the walls are hidden under the trim, which will not be combined with the tree, can be used to cover the ceiling plastic, plasterboard or install stretch ceiling.

Plywood

The most economical and simple version of the ceiling is plywood. Typically use a multilayer phaneer made of high-quality veneer. Large sizes and low weight of plywood slabs allow you to easily and quickly make installation.

Lining

Easy and environmentalous pure Material For finishing the ceiling in a wooden house - lining. Perfectly combined with wooden walls at home. In order to save budget, you can choose an inexpensive tree of wood. The lining is easily mounted thanks to the longitudinal tower and the odds on the ends.

The lining is divided into several classes:

Extra class - top quality lining without bitch and irregularities. For the manufacture use expensive wood;

Class A and B - rails and panels with minor defects that do not affect strength;

Class C - a budget option. Panels are made from low-cost wood breeds, may have irregularities and a large number of bitch.

Veneered panels

In essence, the veneered panels are the same lining, but with some distinction. They are produced on the same technology, but a thin veneer from an expensive tree is glued to the panel from inexpensive wood, and there is no lining on the lining. The result is an imitation of the ceiling from expensive wood breeds. In addition, veneered panels may differ from lining with dimensions.

Array

The array is made only from expensive wood breeds, it has high strength, and the service life can be several decades. The ceiling of the "thoroughbred" array looks very solid, but the price is rather tangible.

Plastic panels

Plastic panels are inexpensive and practical option For finishing Ceilkov country houseallowing you to save on the material. Plastic panels are easy and quickly mounted, do not require additional finishing materialsAnd when damaged, it is easy to replace.

On our site you can find contacts of construction companies that offer house design services. Directly to communicate with representatives, you can visiting the exhibition of houses "Low-rise country".

Plasterboard

The most common finishing material is not only for ceilings, but also for walls - plasterboard. With it, you can easily implement any designer projects. Plasterboard has sufficient air permeability, providing an optimal level of humidity. The only drawback is the need for additional finishes.

For mounting drywall on the ceiling, a frame is required. Sheets are attached to the doom of self-drawing. The frame may be wooden or metal collected from a special profile.

Ceiling can be made multi-level, with built-in backlight. Plasterboard, impregnated with water, is easy to give almost any shape. This property is ideal for creating unusual designs.

Stretch ceiling

The material for stretch ceilings is the PVC film or seamless fabric of polyester. The main advantage is that the stretched canvas retains the form when shrinking a new home. The disadvantage is the impossibility of repair. In case of damage, it is necessary to change the design completely.

Laminate

As ceiling coating You can use laminate. This material has good thermal insulation indicators, durable and does not require much care.

The only condition for installation: the ceiling surface must be perfectly smooth.

Features of the installation of wooden ceilings

The installation of the cutting ceiling implies the fastening of the elements of the trim to the lamp, assembled from the bar. The suspension frame is attached to the supporting ceiling design. Reiki and panels can be attached to the frame without cracks, while connecting the grooves (closed type) or at a distance, forming a small gap ( open type). An option is also possible when decorative inserts are mounted in the gaps between the rails.

The cutting type of suspended ceiling allows you to solve the problem of laying engineering communications, such as wiring and ventilation channels. Free space inside the design can be filled with thermal insulating material.

FEATURES OF MANDATE WORKING ON WOOD CEILING

The most common I. affordable Material For the rush ceiling of wood - lining. It is used to clamp a closed type.

Warring Ceiling Ceiling in Modern Style

The cladding for facing the ceiling has the following dimensions:

length of the canvas from 2 to 4 m;

width from 70 to 150 mm;

thickness from 10 to 25 mm.

Knowing the size of the room, calculate the required amount of material will not be difficult.

When choosing lining from inexpensive wood, you should buy more calculated number In case of detection of gross defects.

As the basis (frame), a pine timber is usually used. Its transverse size should be at least 40 × 40 mm. The calculation of the amount of timber is made on the basis of the length of the perimeter of the room, the length and the number of carriers of central brushes and the number of suspensions for fastening the root to the main ceiling.

Mounting the frame should begin with the perimeter markup of the room. To do this, be brought off the line on the walls at the necessary height, the accuracy is controlled using a construction level.

The next stage is the fastening of the guide bar, with nails or self-tapping screws. To do this, you need to drill through holes or apply furniture corners as an attachment.

Video Description

Read more about how to separate the ceiling in a wooden house with clapboard, look at the video

Next, on the bottom of the guide bar from the wall to the wall, as a "lighthouse" stretch the bonphic thread or fishing line. It is necessary to align in the plane of the supporting structure. At an equal distance, the bearing bars fastened, focusing on the stretched fishing line.

It remains to consolidate the wallboard panels on the frame: the first rail and all the subsequent are attached to the doom in the places of contact with nails or small self-draws. For dense docking panels, you can use the rubber hammer.

Sewing the ceiling close to walls and carrier items is impossible. There should be a small gap in case of the expansion of wood with increasing humidity. The slots can be closed with decorative plinth.

Cheap options for finishing the ceiling in a wooden house

Choosing how to separate the ceiling in a private house, it is necessary to navigate not only on the appearance and other quality of the material, but also on the price category.

If you need to save a little, then their imitation may become an alternative to detrimental finishing materials. For example, a ceiling of plastic panels can be of any color and texture. Plastic "under the tree" looks good in combination with natural wood on the walls.

White seamless panels can compete with expensive stretch ceiling.

MDF panels laminated under wood texture are also suitable for wooden walls. The lining of pine wood is easy to issue a tree for the valuable tree, having impregnated with a verse and lacquered. The same can be done with plywood.

Designer ceiling decorations

The ceiling can be the most unusual part of the interior. The use of various combinations of materials and elements can create a definite mood and direction of style.

Decorative panels

Wood panels made under the order for a certain room, this is the most expensive type of coating. Often use arrays of valuable wood wood, and a wood threads are used as decoration.

Falsh-timber and beams

It is advantageous to use the ceiling design elements for decorating it. The easiest, but spectacular way to decorate a wooden ceiling - dark tanks on the background of a light ceiling canvase. This design visually increases space. If the beams are hidden under the trim, you can attach a false-timber.

Alpharey finish

Alfreina is called artistic finish. Such work is performed various methods: Pumping pattern with roller or stuffing through the stencil, pulling the filёnok, the torching of the painted surface.

This type of finish is rarely used, it is well combined with classic styles under ancient, but does not always fit into modern design.

Finishing the ceiling in a wooden house: a few examples in the photo

Conclusion

The choice of material for finishing the ceiling in a wooden house depends primarily on individual preferences and budget. If you decide to separate the ceilings in your wooden house, but have not yet decided on the choice of material and design, contact professionals who will gladly help you not only choose than to see the ceiling, but also perform this work efficiently. With a cleaner and creative approach, the ceiling specialists will become the main interior decoration.

How to shelter the ceiling in a wooden house inside to be beautiful, practical and environmentally friendly - the question is not out of simple. Not all types of finishes are combined with wood - material with pronounced natural origin. Choosing, you need to focus on the designer direction and the texture of the walls. If this is a rustic style, then the beams and imitation of the log will go, for a luxurious living room more relevant smooth texture, new technologies fit into the modern interior - stretch and suspended structures.

The construction of the ceiling house of the tree has its own specifics. Due to the relatively light beam overlap, to which the ceiling elements are attached, wooden walls carry a much smaller load. There is a thermal insulation ball between the beams and vaporizolation, a draft ceiling is mounted under the insulation, and on top - half-finished or upper floor.

Ceiling trim from rails and beams

Black ceiling - base for decor

The initial stage of the ceiling finishes in a wooden house provides for the construction of draft overlap. For its manufacture, a bar is used, which is installed on the edge. Due to the decrease in the installation step, this method strengthens the entire ceiling construction.

With the help of nails to the sides of the beams, cranial bars are fixing. They will be the basis of the surface of the draft ceiling. To cover, it is necessary to prepare the boards by cutting them from the desired size. Their length should be slightly less than the distance between the beams. Finished boards need to be decomposed so that it turned out perfectly smooth coating.

Before you need to apply the ceiling on wooden beams, you need to process with antiseptics that protect wood from pests, the appearance of fungus, mold.

Chernovaya ceiling

Device and selection of vapor barrier material

In order to limit the penetration of steam out of the room in the insulation, a vapor insulation ball is mounted. The lack of moisture does not allow to develop mold and fungi in the wooden part of the ceiling.

Exist different types Parosolation films:

• Polyethylene standard vapor insulation film. It serves to prevent condensate formation.
• Folgized vapor barrier, which has improved insulating properties and reflective heat. Such a film is best used in conditions of high humidity.
• The membrane film controls the amount of outlet of the wet air.
• Membrane film with variable vapor permeability. Than more humidity Indoor, the greater the insulation bandwidth.

Vapor insulation layer in the ceiling cake

The vapor insulation film is first rolled on the surface, after which it is wrapped and fixed its edges. Ends of the material must be placed by Vangest. If the film rests on the ceiling elements or another node, it cannot be trimmed. In this case, bend and fastening.

Thermal insulation layer for resource saving

Warming the ceilings in a wooden house must be sure to. It has been proven that up to 30% of the heat loss occurs through the slots in the ceilings. For this purpose, you can use different thermal insulation materials:

• Mineral wool. This universal fibrous material is made of mineral raw materials. Its advantage is that it does not burn.
• Equata. Heater from cellulose and other non-volatile substances. Does not rot, does not support burning, has good insulating performance.
• Granulated insulation. Its components - sawdust, antiseptic and glue. With good thermal insulation properties, inferior in sound insulation.
• Styrofoam. Inexpensive and lightweight material that can be easily and quickly mounted. The disadvantage - supports burning, mice often come true in it, and over time, the foam can crumble.
• Ceramzit. It is made of clay. This porous material has high fire resistance and high sound insulation.

Heat insulation ceiling

The heat insulating ball is mounted on top vapor insulation film. The insulation must tightly fill the entire space between the beams. For this, the insulation in the stoves are cut, but not in size, but by 2-4 cm more than the interconnection distance. Minvata stacked online, and there is a small gap between the balls of foam, which you need to fill mounting foam.

Ways to cover ceilings for finishing finish

After working on the device of the draft ceiling, vaporizolation and insulation can be started to the trim. An unequivocal answer to the question of which ceiling is better in a wooden house, it is hard to give a lot of finishing options. The final choice depends on the style of the interior of the house itself. The main types of ceilings are stitched and suspended. But recently there has been a tendency to decline the owners wooden houses To stretch types of ceilings from film and fabric.

With the help of stitched and suspended ceilings, you can quickly, beautiful and reliably give the interior of the finished look. Basically in a wooden house for this purpose, a tree is used. But other materials also have the right to life.

The scheme is quite simple. First, the frame is going to which the details of the coating constituting the whole drawing are attached. Constructions differ only in the presence of suspension. The extension option provides for the use of a frame that is rigidly attached on the draft overlap.

The ceiling of laminate

Cleaning board or lining - design options and installation technology

Before making the ceiling in a private house, please note that it is better to choose a board in a wooden structure to choose a board, wooden or MDF. Plastic panels in this case will be inappropriate. For original design You can choose a laminate, and a block house is wonderful in a bar.

The attractiveness of the choice of wooden finish

Benefits:

• Ecology. Panels, like the board on the ceiling in the house are made of wood material without the use of resins and harmful phenol.
• Design. Color, texture and width of the trim can be chosen for each particular interior.
• Water resistance. The material is not afraid of moisture, which makes it possible to install it in the bathrooms, sauna, in the kitchen.
• Easy care. To clean the wallboard, it is enough to wipe it with a damp cloth without applying cleaning products.
• Functionality. Inside the design of such a ceiling, all the necessary communications are easily located.

Option finish

Installation instructions do it yourself

Technologically, the installation process is practically no different and includes several stages:

1. You need to cut the last bar not only in length, but also in width, not forgetting to leave the gaps from the walls. In addition, it must be fixed by analogy with the first.
2. Holes for spotlights can be made before or after installing the panels on the ceiling.
3. Finishing work on the decoration includes the installation of lamps and a plinth, the function of which is to embello the interior of the room, as well as hide the seams between the ceiling and the wall. If desired, the material can be covered with colorless varnish.

Ceiling of clapboard

Plywood Oven - Economical Choice

Question: What can make ceilings in the house, you can decide using a conventional or waterproof plywood as a material for the binder.

Plywood looks worthy

Advantages of plywood for ceiling trim

This product has a number of benefits:

• Naturalness. The natural components of plywood create a favorable climate in the room, filling it with the aroma of the tree.
• Small weight. Sheets will not create loads on the base.
• Moisture resistance. Processed plywood perfectly serves in high humidity conditions.
• Price. The ceilings from plywood in a wooden house are an order of magnitude lower than most other options.
• Strength. Due to the multi-layer, plywood has a greater strength.

Plywood is based on wood

From explicit deficiencies, you can allocate only two: the material supports burning and is afraid of water.

Two technologies for mounting plywood

Installation of plywood on the ceiling in a wooden house make on a wooden crate from bars. For the sheat, sheets 4-8 mm thick are used. Thin sheets can be installed on glue, thicker nail to a carcass with nails or fasten with self-draws.

The most environmentally friendly plywood of the FC brand is considered. She has practically no harmful substancesAnd the binder between the layers is the carbamide glue. Consider both options for fastening plywood sheets to the base.

Mechanical installation:

1. When primary fixing, the slab is placed on the middle of the bar and fasten in one place.
2. After that, Phaneru align in other bars and fix it finally.
3. For installation, nails are used, the length of which twice the thickness of the sheet is twice.
4. In the case of the use of self-tapping screws, under them before screwing in the panel, drill holes.
5. The fastener is carried out in a step of 15-25 cm, and in the middle of the sheet - 25-45 cm. At the same time, it is necessary to retreat from the edge of a minimum of 1 cm.
6. Between the adjacent sheets, as well as the walls, it is necessary to leave a compensation gap of 2-3 mm.

View to decoration

Plywood gluing:

1. Sheets cut into 2-3 parts
2. A glue is applied to the plywood, which is spacked by a toothed spatula.
3. After that, the panel is fixed to the base and tightly pressed for 1 min.
4. It is important not to forget about the compensation gap.
5. For gluing to a wooden basis, you can use PVA glue.

Plywood ceiling

Before you rinse the ceiling in a private house, Phaneur needs to withstand in the room at least two days. For cutting plywood fit logs, manual circular Saw Or hacksaw with small teeth.

Finishing finish - installation of the plinth between the ceiling and wall, as well as hiding with the help of wooden gaps between sheets, if they are very noticeable. The ceiling can be lacquered.

Ceiling Cake Scheme

Practical and fast plasterboard covering

Plasterboard ceilings are most relevant if it is necessary to align the very uneven surface. There are two main ways to attach plasterboard in a wooden house: on a wooden base from bars and a traditional metal frame.

Plasterboard in a house from a bar

Mounting features on wooden frame

Wooden frame under plasterboard is more suitable if the task is to make a simple single-level ceiling. At the same time, different types of flaws are perfectly hidden without losing the height of the room. But you need to remember that for such a frame you can use only well dried wood high quality.

Procedure:

1. At first, it is necessary to determine the lowest point of the base, retreat 5 cm from it and, using the level, draw a horizontal line around the perimeter.
2. After that, for this horizontal in a circle, fasten the rails and bars along the length of the room with a step of 80 cm.
3. To them, with a step of 50 cm perpendicular to attach the bearing strips, which will be the basis for plasterboard.

Metal carcass

Metal framework technology

Metal frame for mounting plasterboard is more reliable. Its construction includes guide profiles that hold the ceiling frame, and the rack profiles to which the plasterboard sheet is mounted.

Installation order:

1. By analogy with a wooden frame, the ceiling level is set and on the perimeter with the help of self-tapping and dowels fasten the guide profiles.
2. To them with a step of 40 cm fasten the guide profile.
3. The whole design is bonded by self-drawing.
4. To increase the stiffness you need to use the suspensions.
5. If the lighting of the room in the future is planned to install a chandelier or a ceiling, it is advisable to mount mortgages, which will hold the lamp. To this end, it is necessary to attach several rack profiles into the frame of the lighting device.

Combination of plasterboard and wood

The installation of plasterboard sheets begins with plasterboard markup in size and cutting it. Plates are fixed to the frame of self-drawing after 25 cm. At the same time, their heads are slightly accumulated in the panel. The joints between the sheets glue the sickle grid, after which they perform primer, putty and painting of drywall.

Modern design

Fashionable and stylish ceiling with beams

Ceilings with beams in a private house help to decorate the interior with clear lines. Such an option can be carried out using a beam made of natural wood or decorative beams, or as they are also called, a false timber. Both options have a number of advantages - it is simplicity of installation, natural origin, attractive view.

Hint of Country

At the initial stage of installation, the tracer cord is stretched, with which the degree of horizontal ceiling and frame is checked. The quality of the assembly of the finished ceiling depends on this.

As for the installation itself, in the case of the beams of wood, everything is quite simple: they are nails nails or fasten with long self-draws to the ready-made basis.

Combination of beams with clapboard

With a false bar a little more complicated. First make the framework. To do this, you can use a metal profile or wooden bar. The second option simplifies the fastening of the false timber. Decorative beams can already be attached to the finished carcass.

They are screwed to metal profiles with self-draws, and to wooden timber - Needed finish nails. If the bar is closely sticking to the ceiling, the wedges can be put under it, and the fastening is to produce longer self-draws.

Ceiling with a false bar

Modern stretch types of ceilings

The task is the better to fit the ceiling in a private house, you can solve using stretch ceilings. They are film and tissue, look good, fit perfectly to wooden interior, easy to install and comfortable in care. In addition, the film and fabric are not amenable to strain when shrinking at home. Over them is easy to hide communication, they are environmentally friendly, and in the variant with the cloth there is a "breathable" effect.

Stretch ceiling in a wooden house

Practical film decor

Installation of the tension film should be started with the installation of the fastening profile. To do this, with the help of the level, you need to mark the markup throughout the perimeter of the room. Profile or baguette is glued along the laid line to the wall. When the glue is freezing, the fastener is recommended to additionally fix the screws. Immediately make marking of the location of lamps and communications.

Stretch ceiling system

Installation of a glossy film involves the use of a heat gun. At the initial stage, the canvas need to be fixed at the corners of the room, after which the temperature can be lifted up to 40-50º. After that, gradually moving around the material with a heat flush, put the edges of the film in the baguette and secure securely. When the ceiling is already stretched, it needs to give time to cool and take shape, then trim the extra corner.

Glossy surface makes room above

The matte stretch ceiling is pulled by manually and fixed in the baguette towards the center of the walls to the corners. After that, the extra material is removed. The final stage is the installation of lamps according to previously marking.

Ceiling trim textiles

Textile ceilings for chosen

Textiles, in contrast to PVC film, is inherent in the "Breathe" property. In addition, the fabric is very durable and perfectly retain the form. Another advantage is the width of the tissue cloth, they are much wider than film competitors, which allows you to do seamless coating In large rooms.

The installation process is similar to the method of installing a matte film. The differences are that the fabric is initially fixed in the baguette in the center and further towards the corners every 50-60 cm, after which to avoid wrinkles, stretching evenly by the edges. Corners in the profile are fixed last.

Regardless of whether you will choose a wooden ceiling or ceiling from another material, the main thing is that it harmoniously fit into the interior and has become a real decoration of your home.

The popularity of low-rise construction is growing every year. Most among the built houses belongs to wooden buildings. When in a wooden house, actually all the walls are immediately ready for the final finish, the ceilings in such cases require additional studies so that the ceiling finish is high-quality and beautiful.

Ceiling both in high-rise buildings and wooden houses maybe different ways. Choose which options are better, you can only compare all the factors that directly affect the ceiling finish.

To such factors include:

• Natural lighting ratio with planned artificial;
• Future layout and room design;
• Alleged degree of moisture of the room;
• Functional purpose of the room;
• The height of the ceiling in the room;
• The presence of the second floor;
• The presence of a staircase.

With all the diversity of interior proposals, the ceilings in the Siruba can be issued in any direction. At the same time, emphasize environmental friendliness and naturalness, not only in the rustic style with wooden decoration.

Interesting ideas for living room decoration in a private house can be found in the article:

4 ways to make a ceiling in a wooden house

The ceiling coating improvement requires a detailed study. Do quality repairs It is always more profitable and more economical in the future, especially in a new house. You can competently tailor the ceiling, for this it is worth knowing the basic classification of ceiling structures.

Ceilings can be:

1. Suspended;
2. Stitched;
3. Stretched;
4. Combined.

It is worthwhile to take into account the height of the rooms. So that the covering does not grind centimeters at low ceilings, it is worth avoiding suspended ceiling systems that are attached to an additional framework.

Ceiling device in a wooden country house

To properly arrange the ceiling in a litigation, you need to study the device and coating the ceiling system in detail. It is important for this to have an idea of \u200b\u200bthe design of the draft ceiling.

The ceiling system in wooden buildings consists of (in the order from the bottom up):

• Interior decoration;
• Boards;
• Beams;
• Vapor insulation film;
• Thermal insulation material;
• Waterproofer;
• Wooden lag;
• Flooring or publishing the next floor.

Several factors affect the ceiling of ceilings in the firework: waterproofing, thermal insulation, as well as the functionality of the room above the ceiling. The last item is conditional, if the room is not used over the ceiling, then the flooring does not steal. If the ceiling from the outside is a roof, then instead of the flooring the last layer of construction will be roofing material.

The most suitable material for the ceiling in a wooden house

For the inside of the ceiling, a large number of materials will suit. But there are also their limitations. For example, it is not recommended to cover the ceiling inside with plastic material. First, the natural atmosphere of the log house is lost, secondly, plastic can burn.

Cover the ceiling:

1. Natural wooden material;
2. Tensioning with non-combustible PVC film;
3. Plasterboard;
4. Veneered panels;

The ceiling must be filled with a common interior of the house. Therefore, the materials are selected taking into account the decoration of the walls and design of the floor. If the task is to make the trim with your own hands, the designs are selected on the basis of the complexity of the installation.

White color is able to increase the space and raise the height of the room. Before coloring all plasterboard, it is necessary to handle the putty so that in the future it was possible to change the color of the coating.

Wooden materials for the ceiling in the house

SAMI harmonious finish For the ceiling in the lunite - the trim natural tree. The tree combines the basic designs of the house and makes the interior completed and natural.

TO wooden trim Believe:

• Wooden lining (board lining);
• Wooden panels;
• Panels from veneer and MDF plate.

Private house provides more opportunities for the interior of the ceiling. And natural desire, make this finish from natural material, always welcome. And to save wooden Material From the possibility of fire, a protective solution is applied to it.

Plywood ceiling in a wooden modern house

Beautiful photos of the ceiling decor with beams only confirm the popularity of wooden buildings. At the same time, modern trends are directed to Eco at home.

Correct ceiling thermal insulation

Both in the old house, and in the new one may eventually stand up the question of the additional insulation of the ceiling, even if the house was built with chimney heating. The issue of heat insulation ceiling in the Siruba is very extensive, so it must be considered expanded and in detail.

Eliminate such methods of insulation of the ceiling surface:

1. Outer;
2. From the inside

Each of the methods will be as efficient as possible under certain conditions and with certain insulation. For example, laying of playproof materials is used for outdoor method, and vapor-permeable - for internal.

The heat insulation design also depends on the method of ceiling insulation.

Conditional thermal insulation scheme:

• Overlapping beams;
• Suitable insulation;
• Parosolation film;
• Obsek.

The insulation is selected taking into account many factors. To fall asleep insulation tightly and without voids, you can use EcoWhat. The stitching of such material will be fast.

Pour the ceiling by polyurethane foam advise in the absence of rodents who eat this insulation. Everyone heat insulation material special. And that time that will spend on the study of these features, it is worth it because warm house - Pledge of comfort.

Wooden ceilings in interior design (video)

The construction of eco-friendly wooden houses is not only a tribute to fashion, but also awareness of the benefits and value of natural materials. And if such houses are built with a thorough study of all parts, taking into account the rules of eco houses, then the maximum efficiency is expressed and financial savings, and a favorable internal microclimate in the house.

Examples than to sew the ceiling in a wooden house inside (photo)

Wooden private houses are now popular. Wood is a pleasant material that allows you to feel outside the city of nature. In such houses, special attention has to be paid to insulation, including the ceiling. In addition, the walls in the wooden house are often decorated with bars or boards, so the ceiling must be harmoniously combined with such an eco-friendly finish in its style.

If you are engaged in a ceiling trim in wooden cottage house or cottage, it is worth considering a number of nuances for practical convenience and creating aesthetic external view Ceiling coating.

Features

In order to correctly choose the velocity of the ceiling coating in a wooden house, a lot of features of such a finish should be taken into account. When choosing a ceiling coating for your home, consider the following nuances:

• The most organically in a wooden house will look a wooden ceiling. It can be separated by a timber, boards, clapboard or OSB panels. Similar options will look organically in a wooden country house And they will create in the room the necessary atmosphere of comfort, calm and proximity to nature.

The trimming of the timber will be the most expensive, but you can even put the ceiling with a pressed tree with panels even with a limited budget. If you choose the boards, the price will depend on specific wood breeds.

• Wooden ceiling leaves many opportunities for a variety of decor.For example, boards or lining can be painted, you can decorate their carved ornaments or artificially be with the help of special dyes. Finally, on country-style interiors in private houses, decorative beams are very popular - these are lightweight designs of wood and plastic, which can be installed throughout the ceiling or in specific places. The beams allow you to arrange accents and visually delimp the space.

• Sometimes synthetic coating options are chosen for the ceiling in a wooden house.- For example, plastic panels or stretch ceilings. At the same time, if the walls are decorated with wood, on such a ceiling, also should be placed at least small wooden decorative elements - for example, beams. Wooden chandeliers and lamps under the color of the walls are also suitable.

If you want to save money, time and strength on the ceiling surface, the painted ceiling with textured spraying will look very organically in a private wooden house.

• The ceiling in a wooden house often should be further insulated. This is usually made by eco-art, felt, claying or foam. The insulation should take care in advance and choose the material before selecting the appropriate finish option. Some methods of insulation are suitable in order to implement them. own handsAnd in other cases it is better to trust the device to professionals. If you have already purchased a wooden house with a warmed roof and finished rough finish, you will also take care only about the design of the coating.

Materials

There are many suitable materials for the ceiling cover in a wooden house. You can choose options for finishing materials on any budget. Mostly owners of wooden houses prefer finishing from wood, but other ways should not be excluded. The easiest option is to cover the ceiling by plaster and paint. Can choose white colorwhich will be good to combine with dark wood in the house, or warm pastel tones that are best suited for light wood.

To staining is not boring, you can use special sprayers, allowing you to create an interesting texture, or combine several colors.

Another inexpensive way to make a ceiling - to separate it plastic panels. It is a reliable, practical and cheap material, and perform this repair is quite possible own forces. In addition, the modern design of such panels is different large variety. You can pick up white or colored variants, glossy or matte panels and even products imitating wood.

If you have a house with low ceilingsThat you want to visually raise, stretch and suspended structures you will not fit. If the space is enough, it is quite worth considering this option. Stretch ceilings will allow you to hide all the flaws of the draft trim, apply any drawings to the ceiling, and also create unusual lighting in the room - for example, under such a ceiling, you can embed a lamp or even create images from colored LEDs.

Finally, it is quite possible to decorate such ceilings wooden beams Or make a coating, imitating wood.

If you decide to separate the surface of the wood, it can be done using a bar - such a finish will make it possible to create an authentic atmosphere of the village house. In addition, often the ceilings are separated by clapboard - it is easy to lay it on its own because it has butts with recesses for your convenience.

If you are looking for a budget option, the ceilings can be seen plywood or plates of OSB: Often, such a finish can look no less good than a solid tree. The surface can be decorated with carved patterns and beams of different heights.

Design

The ceiling design in a wooden house can be almost any - it all depends on what materials you choose and what effect you want to achieve.

The white ceiling is a fairly common option - this is a neutral solution that everywhere will look appropriate. You can combine white and with other colors. Especially painting in several colors is suitable if you have a spacious room without partitions.

Plastic ceiling coatings refer to modern style. Indeed, even in a wooden house you can create quite modern fashionable interior Due to the interesting combinations of wood, plastic and metal. For the ceiling harmoniously fit, find how to combine it with furniture and the rest of the trim: maybe it will be the same color or a repeating ornament.

Among other things, it is worth trying dark shades that in combination with wood look very stylish. Finally, put emphasis in such an unusual interior with the help of lighting - it is better to use several sources in spacious rooms.

The design with imitation of beams is very often chosen for attic, but such options are suitable for the first, and for the second floor. The decoration of beams looks unusual, and most importantly, the designs are extremely diverse. The beams can be placed in parallel, crosswise or even lay out the frame with their help, which will serve for visual separation of space in the room.

Carved decorative elements on the tree will allow the interior of originality and originality. You can make traditional carved patterns or abstract modern designs - all these options will look very interesting in combination with wood trim.

A very unusual design can be created if it is properly combined by wood of different breeds. For example, for finishing the ceiling in such an unusual version, you can combine dark wood wenge, red and light wood. They can be alternating like a mosaic, or divide the room into several separate zones using such a selection by color.

At the same time, it is not recommended to combine more than three shades - note that the furniture and decoration of the floor or walls are not too different from the main two-three colors of your design ceiling.

Registration of boards under the antique is easy to organize with modern impregnation and coatings, allowing to achieve a decorative effect. Despite the fact that such solutions look quite unexpectedly, in reality they turn out to be practically versatile: aged tree will be equally appropriate to look both within the framework of a traditional style, and it can also be interesting to complement the modern interior.

The painted tree can also look extremely unusual. Most often for such design use white paint or pastel shades. Such a solution will allow you to create a light and sophisticated, but at the same time a simple interior.

If you want to put the elements of romanticism in a stop of the house, painted in bright tones, the tree will fit you in the best possible way.

Style

The choice of ceiling coverage will depend on the style in which you make up all your home. Any ideas should fit into a single concept and create a harmonious atmosphere in a residential space.

Decide with the style is already important at the initial stages of repair, since the style sets the framework in which you can show fantasy and boldly experiment.

For wooden houses, they rarely choose classic style Or Baroque style. However, elements of neoclassics in wooden cottages are often found quite. For such a style, you can choose stretch ceilings or options attached by plastic panels. Well can look a ceiling in brown tones with white molding. In addition, a similar ceiling can be perfectly supplemented with wooden beams from dark lacquered wood.

Usually beams B. neoclassical style The cross will have a cross. Such a ceiling divided into squares can perfectly look in a large outdoor room.

If you prefer a modern concise design, you will be quite able to realize any unexpected ideas in a wooden house. It is very interesting to combine the combination of dark and light wood, aged boards, a combination of wood with bright plastic or with metal structures. Beams can become a universal solution for a similar interior, and emphasize the specifics of the design using lighting.

If you want the ceiling to look as much as possible, choose stretch designs with built-in LEDs.

To finish the premises in olive style, the colored tree is best - most often it is whiten shades, although other pastel colors can also be viewed: for example, a beige, gentle pink or blue can look excellently. Sometimes such wood finish the whole ceiling - the lining is perfectly suitable for this. In addition, you can only be limited to decorative beams if you decorate them an ordinary white painted ceiling or stretch design.

If you prefer Modern Style, your attention can attract stretch ceilings with all sorts of patterns and patterns. Small monotonous ornaments are popular, as well as large images of colors, sky or details of famous paintings.

Often, drawings can perfectly look with the tree - to support the style, you can fix several beams on the ceiling.

For the design of the room in the style of Country, it is necessary to restrict ourselves to the trim of the timber or boards. For the style of the chalet, traditional for alpine villages, are characterized by beveled ceilings with beams. If you want an interior in a Russian style, it is worth thinking about carved ornaments on the ceiling. You can combine a bar with a regular clapboard, leave some boards in natural color, and others paint - all this will only give a variety to your interior.

It is important to note that the smaller your room, the more simple design it is worth choosing - the diversity of textures and colors looks good only in spacious outdoor rooms.

If you want to create a bright and unusual interior in an eclectic style, while designing the ceiling, you can try to combine colored plastic with wood. Plastic panels with glossy texture or mounted ceilings, which involve the design of several tiers can look very interesting. In this case, the ceiling can be postponed wooden boards Or add decorative beams.

Such a solution is perfect for living room, kitchen or children. Eclectic in the interior design allows you to save traditional elements, but to make them relevant and stylish.

Lighting

Lighting in the design of the ceiling coating is often paying little attention, but it is impossible to underestimate it. First of all, it is important that the room is well lit, so it is necessary to think through the location of the lamps in terms of practicality. In addition, it is with the help of light that the emphasis can be arranged, make the ceilings visually above, distinguish between space in the house or allocate individual elements of the decor.

Finally, modern technologies allow you to use colored LEDs to create a special atmosphere in the house, as well as create complex images from lamps.

If you painted the ceiling, posted it with clapboards or plastic panels, it is worth using chandeliers for lighting - you can now find a wide variety of wooden, plastic, stained glass and metal models, so you will surely find yourself an option to taste.

If you decorate a small room, for its lighting, you will most likely have a single chandelier with several bright lamps directed in different directions. At the same time, a large chandelier may be required for a large room - you can choose different modelsThereby contributing to the separation of space on the zone.

Very often for decorating wooden houses Choose decorative beams - their inner surface Empty, so they can be perfectly embedded in any lamps and ensure uniform lighting of the spacious room around the perimeter or throughout the area. The lamps will help to additionally highlight the beams in the interior and make the design even more interesting.

You can install lamps in different directions - from below and from the side of the beams. So you can highlight individual zones with lighting.

If you have stretch ceilings, the lamps can be embedded in the design almost anywhere - this will create uniform lighting and not distract attention from interesting design Ceiling for catchy chandeliers. Such a solution is perfect for modern interiors Minimalism style. In addition, the closest ceilings with the built-in LEDs are gaining popularity: around the perimeter you can make a glowing frame, create drawings from LEDs or make a seating with a print and add printed pictures with backlight.

You can choose multicolored LEDs that are perfect for children's room, bedroom or living room - unusual lighting will allow modern view Even the traditional house from the bar.

Some variants of the ceiling coating can be mounted independently, and to install complex structures it is better to resort to the help of a specialist. If you have already chosen the coating option for your interior and in the trifles thought the designer project, it remains to decide what you can make your own hands, and for what professional assistance will need. If you decide to perform the bulk of the work on your own, it is important to take into account many nuances of repair in a wooden house.

First of all, it is important that the house is warm, so the issue of thermal insulation will be priority. Well, if you purchased a house with finished insulation. If not, with basic skills repair work It is quite possible to warm the roof of an eco-art, foam or membrane web. To do this, a metal or wooden frame is made, inside which the insulation will be located.

When independently installing beams, it is worth a clearly measuring its ceiling and take into account possible irregularities or flaws allowed in the draft finish. Beams need to be aligned so that they are located strictly parallel. Due to the fact that the decorative rash balses are empty inside and sufficiently light, it will not be difficult: you can independently place beams and on the usual ceiling, and on the mowed ceiling of the attic. The overlaps are usually masked by transverse beams or make dense joints with subsequent grinding. But if you are going to make built-in light, it is better to turn to the electrician.

It is also possible to make the ceiling with plastic panels, plates of pressed wood or clapboard - all this is absolutely difficult if you make accurate measurements and make a little effort. Even a complex visual design, combining wood and plastic, can be completely implemented on their own.

Nevertheless, if you want a tension or suspended ceiling structure, to install such options it is better to contact the specialists.

On how to separate the ceiling, see the following video.

Beautiful examples in the interior

The design of the ceiling coating in a private house can be extremely diverse. If you cannot decide on you with the option, consider real examples of the ceiling decor in wooden houses.

Hinged ceiling with an interesting design and built-in lamps, which are almost not rushing into the eyes, can be successfully combined with wooden decor elements. For example, several decorative beams that coincide with furniture in color can become a low-end design element and allow you to highlight the semantic center in a spacious room with several zones.

The decor with dark rocks of wood is quite rare, so it looks stylish and unusual. To additionally allocate noble dark tint, You can choose light furniture and wall decoration. So you can create a Scandinavian style design - these are simple, laconic and practical solutionswhich look modern, but not vulgar.

Highlighting dark wood on the contrast, decorated under the antique, you will visually make an emphasis on natural natural materials "This will allow you to create a unique atmosphere in the house and feel part of nature.

Even the simplest ceiling of the ceiling with a light tree with a light tree can look very stylish. This is a universal solution that is equally organically fit into modern, and in traditional interior types. If the ceiling, painted in white, it seems to you too boring, but also to focus on the design of the ceiling coating you do not want, the lining will become for you the most successful option of decor.