Homemade for giving ... Rope from plastic bottles, preparation for spring .... How to make a rope from an ordinary plastic bottle of a thread of plastic bottles with your own hands

The roller shows first as the easiest way to remove the rope from the plastic bottle. Next, how to burn it to increase rigidity.

There is a rope or even fishing line from one and a half. But in our case there is no task to find even easier or effective method. The main thing is to test the original rope on the strength, and then try to improve its properties by firing.

So, cut off the bottom, make an incision to capture the tape. Dno need to cut smoothly. We put two coins, the third is based on them. The knife lies on it, the blade looks a little up. Press the foot on the knife and hold the blade in the same position. If the bottom is cut smoothly, the tail will be uniform width. If the blade is proposed correctly, then the bottle is dissolved in one right. Of the two-liter bottle, about 11 meters of ribbon 4-5 mm wide are obtained.

With the help of fire, you can significantly increase the rigidity of the tape. The tape is twisted into the tube. You can make nods for fishing rod, broom for the street and a lot more. In addition, the strength of the rope increases.

Discussion.

Happyman198525.
4 years ago
Now I understand why our people pollute forest with plastic bottles, packages, glass bottles. If we are attacked, we will leave in the forest. And there is a rope, and glass for burning a fire, and dishes.

Anatoly Smirnov
4 years ago
It is not entirely clear the purpose, for what, for survival, then it had to be done in conditions close to real, and not in the "greenhouse". And the final product also had to show the test, hang on such a rope for example or to tie something. Only the principle is shown, and the application is questionable.

Alokin Alokinalokin.
4 years ago
Strength depends on the quality of cutting, if there are burrs, then the strength decreases, and each will have its own width, and not constant.

Olli Haroshkina.
4 years ago
You can weave summer street furniture, on metal carcass, chairs of the wheelchair, much cheaper than " artificial Rattan."In Lerua will turn out. And durable than from the vine. And the mobility is also good.

Anna Sorokina
3 years ago
And also such a "rope" can be used by the share of weaving, instead of newspaper tubes. It is interesting to work, stronger and dyeing is not necessary!

Asya Karelskaya
3 years ago
And you know the Lord-Urbanist, we have people live on the village. The collective farms were ruined, there was no place to work with people, the majority in poverty ends are barely reduced, without gas and water ... It is necessary to somehow survive. So invent the peasants, turn on fantasy. Well done!

80Ajvan.
4 years ago
Interesting video. For survival in PE situations, on the island, in the forest. Bottles are lying everywhere or nails a flow. With the help of such a rope, you can build a raft, impose a bus.

Alokin Alokinalokin.
5 years ago
There is no sense about the brand. It all depends on the preform of which make a bottle and from the recipe on the blowing machine (on which the uniformity of the distribution of the material and the wall thickness depends). And a bottle of beer. Try further, I have a 5-bottle start to get. First, it is important to cut the bottle exactly and cut off the strip of plastic smoothly in width. Well, the knife should be sharp.

Alokin Alokinalokin.
5 years ago
The rope should not be twisted into the tube, enough for only the edges lightly wrapped. I noticed that the transparent plastic is worse twisted, only the edges are stolen, while the rigidity increases, but not significantly.

Scientific Stoun.

Hello! Such a problem - when maintaining over fire (without delaying over certain areas), the rope is rushing, and not twisted, etc. What do wrong?

Igor Earth
5 years ago
I was able to "dare" meter today. And from 3-4 cm thick. Smeared it on the fire. Tied to the tree, and as he did not try, and could not break it. I think if you do CM 5, then you can tow the car. The rope turns out really strong.

Plastic bottle rope can help out in an unexpected situation, on a picnic or hike. It will become an indispensable assistant gardener: the cord is often used for garter of vegetables and trees, creates a support for curly plants. You can make such a tape with a special device or stationery knife. The machine for cutting bottles, if any, will help to make plastic strips quickly and with great convenience than when working with a blade. To start work, it is necessary to cut the bottom from the usual container and the top, leaving only a plastic cylinder.

Bottle Rope Use Options

People who often use a plastic bottle rope know how universal Material. It can be used in everyday life and to create various crafts. Plastic bottle brewer perfectly suitable for fastening fittings during construction work And it is advantageous from the metal wire due to the absence of oxidation reaction. Another advantage of this material is low cost, unlike special homutics for the binding of iron rods.

Using plastic tape in needlework

Another way to use the product: Tool knobs. This allows you to isolate the surface of the handle and prevent slipping. This method works better than using the tape. The cord from the plastic bottle allows you to repair and make furniture for the garden. Transparent rope fastensed the details of products and does not spoil them appearance. Another kind of crafts from bottles - baskets and handbags. Cords are used to create original and durable containers, capacities and various decorative items for interior design.

How to make a rope manufacturing machine

To make it easier for the process of manufacturing a rope from a plastic bottle, you need to make a special machine for cutting thin strips. There are several ways to create such a product. In the first embodiment, two necks are needed for the manufacture of the machine from ordinary bottles, the edges of which should be sharpened, and the usual CD. The necks are attached to the glue disk, and the machine itself is fixed on the table with the help of an ordinary wide scotch. And you can also use iron blanks and attach them to bolts to wooden surface - Such an option will last longer. Before starting work, the bottom of the bottle is cut into a sharp knife, then from the bottom it is necessary to separate a small tail, place it between the sharpened parts of the neck and turn the bottle in the direction of the cut. From the tank will start separating the fishing line. The resulting strip for convenience is better to minimize into the dog.

Machine from corner

For the next option, additional materials will be needed. They can be purchased in a construction store or search in their own storage room. The base of the machine is a duralumin corner up to 30 cm long, the blade from the construction or stationery knife. For their fastening, a thin metal rod, screws and nuts should be prepared. Drill, pliers and hacksaw metal will be used from the tools. At the first stage, several holes in the size of the used screws are drilled in the corner, and screw the knife blade on the one hand. Over it needs to make slits through which the plastic tape will be held.

The propuls are treated with sandpaper so that there is no burr. The width of the tape depends on the size of the holes, therefore you can drink holes of different diameters to make cords for different types of work. From the side of the knife, it is necessary to make an emphasis from the curved metal strip so that it does not bend during operation. In another hole attached a handle from a thin rod. Long to keep in your hands such a tool is not too convenient because experienced masters Used to fasten it, which increases the speed of work.

Production of plastic bottles rope

Fixing the machine, the start of the tape is separated from the plastic cylinder and insert it into one of the slots, and the billet itself hang on the handle. Then it is enough just to pull over the end of the rope, and the bottle will be knit itself, in contact with the blade of the knife. Store the resulting fishing line is the easiest way on the remedy from the wire. Rope from a plastic bottle is a free replacement of ordinary metal fasteners, fishing line and even yarn. It is very simple to make it, and the material is within walking distance in almost any terrain. In addition, the processing of plastic is concern for nature and ecology.

Sufficiently came across the roller on the network, where it was told, how to make a rope from a plastic bottle, more precisely to get, cutting this bottle is pretty in the original method. Why such a rope needed was still incomprehensible, but here is an example of disposal plastic bottleswhich in incredible quantities constantly appears in each house, very pleased.

And the time has come when not only improved the "tool / machine" on the cutting of the rope from the bottle, but also began to invent ways to apply the obtained "product".

To start about the device that cuts the bottle On the rope:

The design is already improved and allows you to cut the rope with ease of the bottle - only the design itself is needed (having small dimensions and ease of manufacture), a bottle and one free hand. In addition, the new design of the bottling allows you to cut the tapes of different widths (from 1 mm to 1 cm), without rearring the blade.

What is needed to create such bottles?

Corn corner or channel (corner with a wall thickness of 2.5 mm),
- blade from the stationery knife,
- 2 M5 nuts,
- hairpin M5 or a piece of wire,
- Wooden storage strut.

In trimming of the channel you need to drill through a hole under the M5 bolt so that this hole coincides with the mounting hole of the stationery knife blades. Then, retreating from drilled hole On the width of the nut, make the cuts (rather thick) in the corner of different lengths. The depth of the cut will limit the width of the tape.

It remains to collect bottles. To do this, it is necessary to put the blade into the channel, and by aligning the hole, to turn the hairpin in them (see video - the stud is bent in the direction of the slots) or wire. And, if you have a channel, spread the wedges of the chapellera wall, and if the corner, then clamp one of the walls of the corner.

To linger the second end of the blade, insert a wooden strut in the bottling. That's all. Its not even be fixed in the vice or another support - it is a manual bottleneury.

When you stretch the tape, try to pull in the direction of the bottle - otherwise the tape breaks up literally after a few centimeters.

Here are what methods of application The ropes from the plastic bottle have already invented:

The finest tape (1 mm) can be used on the Donke,
- wrap the handles of hammers, axes and another tool,
- Create reliable detachable connections,
- fasten / repair details of garden furniture,
- knit fittings for the foundation,
- have a lot of heat shrinking rope for various household needs,
- weave baskets and bags,
- weave lamps
- etc.

And finally, the thought came to the head, which forced to go shopping for the purchase of details to create a "design for cutting a bottle", as it became apparent, why this rope is needed to be needed.

For fence.
Of course, the fear of temporary, but so necessary during the development of the site and the only possible for the period of construction of the house and other more important cases: there is still time and means for the construction of the "serious" fence of the site. Often, by the way, there is no need to stew all the existing land: one thing is a plot with a house, another - a BOOHER Garden in the village.

So, back to the fence. What is this fence where you can apply a plastic rope from the bottle? Imagine a braided fence different types Which we often encounter "thematic" villages, parks, various natural refined tourist sites. They look beautiful, the material on them is available (branches, sticks), and in lifetime in the village and free (at the same time it will be able to clear the thickets along the non-existent village street, and clean the swamp, and the abandoned garden and ... in general, the material to build The fence is very much without difficulty). It remains only one concern - how to secure these "details of the fence" to each other, so that it does not have to constantly fall.

Here on the aid and the rope from the plastic bottle will come. How to apply it and strengthen (reliably squeezed) is also shown in this video.
When heated, the tape is compacted and shortening. The author of the video heats it with the help of a construction dryer. This turns out a free, very strong and detachable connection of almost any details.

It remains only to take the case! And no screws and nails that would cope with the same task with a much less reliable result. Pet-ribbon loop withstands monstrous loads, not rust / does not rot, it will not shift and will not slip, it is not sorry to spend it, and it is easy to get it at any time, and completely free.

As a man of economic, I was hooked by the topic of obtaining rings from plastic bottles. A cool thing, from an unnecessary plastic bottle to get a rather durable rope (more precisely Pat tape), which is free and only it is consumed in the farm, and many make any crafts and not only decorative. Pat tape still has heat shrink properties, which makes it possible to make durable compounds and minor repairs, for example, fixed his wife's mop and herself. Sometimes it replaces the non-replaceable blue isolate 🙂
Soon summer, and you can use such a free rope for domestic purposes. Moreover, the heat-shrink tape (rope) is very easy and simply get from the not necessary plastic bottle.

I will start with the use of the bottle from the resulting PET ribbon. Wannt that in the first comments will be inserted by the video of the lawyer Egorova, who did not see recommend to see, and from this began my acquaintance with Pat ribbon. I will describe where I personally used it, and who else used PET tape complement in the comments, it's interesting.

In the apartment:
Fixed the mop - metal pipe In the articulation type cracked and diverged, I had to wrap the band from the bottle and wrap the PET ribbon and put on the gas stove, it turned out neatly and firmly.
I fixed my chair - it woke well where he cracked and sat down a lighter. Saving blue tape! 🙂
Classic - Pens on Passatia, wrapped and sat down.
Instead of Scotch - packaged wires in the harnesses, tied up cardboard boxes. It happens and tape does not end in time.
The trumpet flowed - crane crane was cracked, took the rubber glove cut on the tape, wrapped tightly, then wrapped Pat ribbon, the plumbing was waited and he had already turned off the water in the house and changed the crane.

Pomidery:
There is not a spaled field, parallel to the garden twine, something to tie, bind, hang, pull, even used instead of nails when it ended - temporary greenhouse did. I cleaned a young garden, in a couple of minutes I made stools to rest, dragged the branches and logs with an improvised thick rope from PET ribbons, it's all easier than hands.

I love to go to the forest to picnics and just spontaneous walks by the company:
Bottles themselves brought with water and or other liquids, they were released and used them. Move the hauncher from the same bottle of which and tape mined, tie stools or even shops and chairs, stretch the improvised awning from a raincoat or plastic film, collect and carry branches and logs lighter than the rope. On fishing put an improvised awning from the sun from the bedspread - the umbrella forgot 🙂. Garbage naturally to clean up.

If briefly, it is not fanatically running with PET ribbon to the advantage, but I use where there are unnecessary plastic bottles and no ropes or spend a normal rope is not rationally and sorry, and PET Ribe will solve these tasks. I am not engaged in mountaineering with such a rope. Challenge economic rope, which is not a pity, the same heat shrink and reuse of plastic.

It's easier and faster to get a plastic bottle rope with a fixture or tool such as bottling. On it and will stop more.

The very idea has become infected after the video of the lawyer Egorova. But it did not do it bottle, like other options from the corners, washers, meat grinders, bars and pipes, etc. I do not have a workshop and garage, there are no such materials and tools, the meat grinder is electric, too lazy to do them and I do not need a machine for cutting bottles. Therefore decided not to repeat, but still easier, most importantly from available materials And more compact (manual), to cut the bottle on the tape at the place of application of the rope. Motion a lot of bottled vessels, ranging from a mini and micro and ending with a bottle of the ax. So as not to tire will demonstrate the simplest, to choose from ...

The very first was bottled from the pencil sharpener. It is done very simple - unscrew the blade, flip the blade, insert a little at an angle to the sharpener, fasten without fanaticism and ready. Well, 20 seconds maximum. It is advisable to use aluminum pencil sharpeners, although I have seen already and pictures on the network with plastic sharpeners, the blade was added to the body of the soldering iron.
Immediately noticed that the sharpener in the campaigns is not a bad tool - you can easily get a chips from dry sticks and use it as a crossbar or even a cloud. Therefore, this option was positioned with me as going, light and compact. And the upgrade of this bottle, sharpening under the trips - the cuttings on the screw to unscrew the coin and use the blade to prepare the bottle (the knife is no longer needed), for convenience, added another knife to the sharpening housing and additional rods to obtain ribbons of different widths. It is cool but care towards complication, although it turned out to be multifunctional and most often and use it and satisfied.

Two sections of a stationery or construction knife. This blade is prepared by the bottle itself, bottles are made from the cover from the bottle, and this blade almost replaces stationery knife If necessary (the parcel is opened, etc.), and in itself compact. Made a simple converter from the bottle and threw in the purse as a balm, now the small domestic blade is always with me.

It is better to use this option, a little more difficult, but also more convenient to use.

And for dessert - bottled scissors. Only scissors and bottle itself, and that's it. We prepare the bottle with scissors, removing the ring from the neck, the stop of the guide is made from the ring, and then cut the tape, it is necessary to just see. Scissors are preferably sharp and no backlash. If there is a backlash and snack a bottle, then you need to pull the tape from above the scissors.
Tested on a small scissors (Swiss knife), not very comfortable and harpko works. The test on the secateur (the lower half with the jar) failed, but there are secectors and as scissors. Also changed the width of the resulting ribbon, the fishing line and did not try to cut off but the width of 2mm was obtained, the preparation of the bottle is important. The principle itself is very worker and can be developed - instead of a ring with a neck to use other materials.
Cool way.

When designing bottling data, the following principles were guided by the following principles: the use of available materials, simplicity, ease of manufacture, repeatability, and cut at an angle.

Granted in this post the bottles of manual (this is not machines), respectively, when used, require some experience, skill and security measures. You can also cut into the paper, not to mention the tape and it is very painful and unpleasant and not necessary. Try to work in gloves, carefully, safely, etc .. The preparation of the bottle is greatly affected on the quality of the cut, it is necessary for a wide ribbon, although bottling will still equalize the tape, but it turns out a piece with waves. It is recommended to pull the tape trying a bit pressed to the blade, so the bottle is crumbling more slowly and sent to the grip of the blade, it turns out more accurately.

There are no such obvious preferences on the choice of bottles I do not have, I use what is at the time at the moment and with the less than the less about it is usually an improved sharpener, scissors, blade or knife and lid, if I find a meat grinder, it will come. Demonstrated to familiarize the simplest, repeatable and compact. I think you will find at all sharpener, stationery knife, scissors, Gloves, bottle and quickly get a tape from the bottle, and do not go to construction stores for the rope. There are many other different bottled in the network, from simple to the machines.

TOTAL
The not necessary plastic bottle can still serve as PET tape (rope) and heat shrinking.
Naturally, fanaticism does not apply to this, but it is also useful to just know what is possible and PET ribbon from a plastic bottle is very easy to get, can help.

The survival officer from an ordinary person is distinguished not camouflage, stocks and warehouse knives in pockets. Differences primarily at the level of thinking. An ordinary person looks at the thing and uses it according to the generally accepted stereotypes. And survival looks and thinks " And how can she come in handy?". And this applies to all - even ordinary plastic bottles.

The methods of their use are very diverse: and water purification, and construction material, and much more. But our comrade Fedor Stepanov (He has repeatedly shared with us with his cunning know-how, for example, by the manufacture of an army kittel) I found another one effective application - from PET bottles you can do particularly durable leske-rope. And he did not just come up with how, but the video took off about it. Next - the text and the words of the author.

This video is about making Lerky rope From a plastic bottle. Do not ribbon, namely rings. PET ribbon is good, but has a number of restrictions on use.

For the manufacture of such a rope we will need bottles, screwdriver and construction hairdryer. Bottles deserves separate attention, thanks to his inventor to lawyer Egorov ( this comrade also did - such an article we also have. Approx. Editor), Link to video in its manufacture in the description.

To begin with, cut the ribbon from a conventional plastic bottle. The thickness of the manufactured fishing line depends on the width of the cut ribbon, the fishing line is the thicker than the wider than the ribbon you use. Then one end of the sliced \u200b\u200btape must be fixed, for example, in vice, and the second to clamp in the cartridge is screwed. We stretch the ribbon and begin to twist it in the rope. Tape must always be kept strained. If you release - the ribbon is scheduled. Now we take a construction hairdryer and raging the tape along the entire length. Due to the tension force, the preheated area is folded into a neat spiral, and when it will cool back it is no longer planned. One Council - Do not overheat. Polyethylenefluoroftoftolate is easily vulcanized and loses all its beneficial features. Please note: so that the rope's weaving is uniform, in the process of manufacture, the tape must be periodically twisted. Everything, leske-Verevkand ready.

If the sharp need rise, then you can do without a hair dryer and screwdriver. Using, for example any stick as a twist, and a lighter or a torch for heating PET tape. But it is better to still use a more technological tool. Empirical observations have shown that the rope can be made of several layers of PET ribbons, such a rope is more elastic and stronger, but much thicker.

Now a few words about the use of such lerky rope. As you guessed from the title, such a fishing line is perfect for trimmer lawn mowers and culper. The cost of industrial fishing line is great, and here you get it almost free and in unlimited quantities. In addition, the desired size of the size in the store may not be, but by my method can be made any. The fishing line is much stronger than PET tape of the same width and withstands significantly more load. And thanks to cylindrical geometry and rigidity - easily passes into the champs, grooves and sleeves. I am sure that such a rope is mass. From using as linen, before making a lake and strings for the guitar from it. Other ideas about the use of fishing rope are shared in the comments.