Wooden breadpage do it yourself. Drawing. Breadmaker with her own hands from various materials Technological Map of Wood Breadmakes

Breadmaker made with your own hands, wonderfully decorate the table in your kitchen. The kitchen is rightfully considered the heart of the house.

How to do wooden bread do it yourself. MK №1

Usually bread stored either in the cellophane package, or in the refrigerator. But the best place for him, of course, a wooden bread box. There is a more or less permanent humidity and such a bread box breathes, thanks to which the bread does not mold and does not worry. Wooden bread is not so difficult to make it yourself.
Here is its drawing:

From the materials we need a board with a thickness of 10-12 mm better of birch, oak, ash or linden. Pine is not suitable, because It will saturate the bread with a resinous smell. You will also need wooden slats for a flexible cover, handle and fasteners.
From the board, drink two sidewalls, bottom and upper bar (see Synod).

From the inside in the sidewalls it is necessary to make a semicircular groove for a flexible cover. It is better to choose it with a mill. You can use a finger mill on a drill. The grooves go a semicircle. The lid slides on them and falls into rear part Lubber. The grooves must be done with this calculation so that the lid does not get stuck in them, but slid easily and freely.
The lid itself is made of thin wooden plates. Reiki can be glued to the tissue base or insert the cord. In each rail, 3 holes are drilled at an equal distance and through them the line is designed as shown in the diagram. In general, they are attached to the fishing line.

If the family is large, you can make a bunk breadbox for the same principle:

The breadbox can be covered outside with varnish or linen oil, and it is better to leave without a coating. However, a wooden breadbox can be decorated with burning, decoupage or painting, as you like.

Wood bread box. MK №2.

It is best to keep bread in a wooden binice. I developed my form and think it is very successful. Making such a product from wood can even beginner in this matter. Beautiful bunch of wood made with soul and love will decorate any kitchen.

I had to do from different breeds of a tree, but from pine and birch most often. This breadpage is made of pine. First thing I made a template on side walls And on it, I calculated all the sizes of the remaining parts.

Dimensions of parts

Cover 373 x 220 x 15 mm - 1 pc
Top 375 x 120 x 15 mm - 1 pc
rear 375 x 185 x 15 mm - 1 pc
Lower 375 x 230 x 15 mm - 1 pc
Side 255 x 205 x 15 mm - 2 pcs

You need to choose clean areas on the board. The largest width of the 230 mm board. Here, when choosing a material, you must immediately watch where what part it is placed. You can make such a bread from plywood, but I always did from the tree.

Selecting the boards, you need to start with the fuggification of one side and edge. Then we run to the desired size in a thickness of 15 mm on the reysmus. On the saw we skip all the parts by width and then we believe the finishing size. On the template I draw two identical sidewalls and also drinking on a saw. Before assembling shallow emery paper, go through all edges and knock off roughness.

Bread Assembly

When assembling the most important thing to make accurate marking. I take always awl and metal ruler. Plugs do on the sidewalls and on the ends of the details. In the lower and rear parts are three connections, in the upper two and the lid opens on one on each side. So in each side wall it is necessary to make nine punctures. After marking, drill a 5 mm drill to a depth of 10 mm, in every part. Connecting parts made metal. Hisching for metal Heat from 5 mm nails 18 pcs 19 mm.

Of course, you can make a tree, but in the lid should be made of metal. Connecting blanks must be rounded on the sandpaper. Bonded a wooden breadbox on epoxy resin. The first thing you need to insert connections into the lid, on them it will be tightly held, easy to open and closed.

Laming glue drilled holes, a slight tapping of the hammer is treated with the beginning of the connection to the details. Putting a lateral part and wrapped the hole in it insert the top, rear and bottom item. We apply glue to the openings of the second side part and press with the top. In the hole where the adhesive cover is inserted is not applied. Look until it does not drink glue, as the lid opens and closes. If everything is fine, you can neatly put on one side and put the cargo at the top. On the finished glued product you can apply any thread.

Breadmaker wooden well suited for thread. I applied a geometric thread on this breadcrot. It was made very long ago and carving on it is the simplest. Before cutting, you need to apply a picture. Everything is done as on the draw, kruzhka squares. I always draw in different ways that I liked it. With threads need only one cutter. After cut, covered the product by the art. Let's dry the veil. Wood products should be varnished twice. After the first coating, the shallow emery paper will remove the rose pile and only after that apply the second layer. Varnish used waterproof and bread from a tree can be wiped with a damp cloth. I made this breadpage wooden more than twenty-five years ago.

Woodley bread bag + bamboo napkin. MK №3

Any hostess in the kitchen has a place where buns are stored for tea and bread to dinner. Someone wraps bread into a plastic bag, someone neatly puts it into a plastic, bought in the store bread.

I made a breadpage with my own hands from wooden tables with a thickness of 10 mm and a small bamboo napkin, which can be easily bought in the nearest supermarket.

The dimensions of the blanks I draw in the figure below. Basically, they are determined by the sizes of the bamboo napkin. The radius of the roundabilities did not give, because he himself performed him on the already ready-made pattern. The moleno can be drawn on a dense cardboard with a pencil, and then cut the side walls of the bread box with a jigsaw. Dropped parts, if necessary, carefully process shallow emery paper.
a href \u003d "http: //img0..jpg" REL \u003d "Li-Bigpic" target \u003d "_ blank"\u003e

The side walls are glued to the bottom of the "moment of carpentry" and strengthen self-drawing or small cloves. To get legs, the donyshko can be glued to the sidewalls, retreating from the edge of five millimeters.

Similarly, glue and nail the back. The height of her smaller sides. So it will be more beautiful to lie a bamboo napkin.

After the glue is dry, I got this billet.

Bamboo napkins are different colors. You can pick up such that is well suited in the interior of your kitchen.

Before attaching a napkin to the loaf, you need to try it to lie neatly.

Wooden crib items I was covered with varnish. When the lacquer is dry, put a napkin on top and attached it to the back and side walls with decorative furniture cloves. The front of the napkin hangs freely, not fixed.

Here is such a beautiful bread box I got.

Kakunin Valery Pavlovich - Minusinsk city.

Since the most ancient times, breadths in our country took a special place on the table. How many sayings about it is folded, how much work is invested in it? That is why special attention was paid to the storage of this product.

Bread bed - earlier and now

Previously, the so-called wooden boxes used in great demand. The people said that if she skillfully done, then in her bread for seven days saves its properties, it remains fragrant and soft. The tree has a light, porous structure. Due to this, the humidity inside the box is perfectly adjustable. Our ancestors were beautifully drawn up her, decorated with threads, painted with bright, elegant patterns. Today we call such a box - the bread maker is wooden.

To date, there are masters that are independently made from the Bread Storage Tree. Of course, now the fiction has developed more comfortable designs than existed in the old days. A modern wooden bread box has a more compact form, as it is designed for an ordinary family. After all, if earlier in the family there were 10-15 people, today it is mostly 3-4 people.

There are, of course, this product and a substantial minus - it is quite difficult to wash. The tree very easily absorbs moisture and dries long. Therefore, we assume to this issue carefully. When cleaning a wooden bread box, do not use too wet sponges and rags and leave to dry in a warm place with an open lid. Otherwise, you risk instead of a wonderful bread storage box to get just a swollen piece of wood.

Is it possible to make it yourself?

It will be able to make it yourself at home can anyone who at least knows how to use below. We describe several ways to how it can be done. General scheme It remains unchanged, only the details are changed. However, before choosing one of them, you need to think about how much bread you plan to store.

The bread box is wooden, with their own hands, will bring you a lot of use and joy if you remember the main rule - the bread will be much longer to remain soft if the percentage will slowly change inside it, it depends on the filling of the wooden box: the more product in it, the slower change humidity. But it's not worth scoring it completely either. And the product will move, and do not cry the lid.

If there is little man in the family, then the usual small bread bed is suitable, if much, then it is best to make a breadpage consisting of two compartments. They can be stored in them different varieties of bread.

General manufacturing scheme

First of all, you will need wooden plank. It is best to choose birch, oak, ash or linden. But the pine use is not worth it, it is saturated with the smell of resin, and the bread easily absorbs odors. Its thickness should be about ten millimeters. Also go to the rails from which the flexible cover will be made, handle and fastener.

Board Using for the manufacture of two side walls, top planks and bottom. On the sidewalls from the inside, semicircular grooves are made. We advise you to apply a milling mill. For example, a finger mill can be used to be installed on a drill. The lid will move around the groove.

Our bread box will require more covers. It is made of small thickness. Reiki is either bonded with a cord, or glued on the tissue base.

Blender options

As we said - general principle The manufacture of a wooden bread bed remains unchanged. What are the details?

For example, in the same diagram you can make a bunk, for big family. Secondly, the form itself can change. You can create rounded, rectangular, square, curly wooden bread boxes. The photo above shows you that the form of "boxes" can be any. Different ways You can also attach doors. Optionally, it will be a movable roof of thin peeks. It can be dense, attached fasteners on the side walls and opens up either down. You can even make a completely unusual option - and the lid of your bread box will open a lobby like a microwave door.

The inner surface of the product is not covered with anything, but the outside can be opened with varnish or flax oil. Further, it all depends on your fantasy - many decorate homemade breadmen by carving, painting, etc.

Afterword

Of course, the modern market offers us a huge number of breadfind options. They are made from plastics, metal, wood and other materials. It would seem why to suffer and do everything yourself when all this has long been stamped at factories and is freely sold in stores? But after all, the thing made with his own hands always gives a special warmth and comfort indoors.

As for bars for bread from other materials, I would like to note that none of them have them the qualities that have a wooden bread box. Consumer reviews indicate that only wood products retain natural taste and soft bread. And if you decide to make it yourself, you can withstand the style you need, you will be sure of the quality of the materials used, and just make sure.

All photos from the article

Make a bread maker from plywood with your own hands by almost anyone, since it does not need expensive equipment for this. You can do the simplest instrument and several advice that we describe in our article. The most important thing is to follow accuracy and use qualitative materialSince the design will be used to store food.

What will take for work

If you decide to make a breadboard, first of all you will need to have the following materials and devices at hand:

Important!
To make a high-quality product, you need to spend very careful measurements and place all the elements.
In this work, do not do without roulette, line, square and carbon pencil.

Process description

We will tell you how to properly prepare the material, how to choose and on which nuances should pay the closest attention. Every detail is important here, so all recommendations should be carefully followed.

Preparatory stage

This stage includes a number of important actions:

• First you need to choose high-quality material manufacturing material, it is better to use a fane with a thickness of about 10 mm, then the bread maker will be durable and can withstand even significant loads. We recommend using the options with the top layer of birch veneer, since this wood is more solid and does not release the resin in contrast to coniferous rocks;

• You also need to make the drawings of the bread maker do it yourself from plywood, the perfect accuracy is not needed here, the most important thing is to determine all the sizes so that you can clearly navigate in the process of work and not allow mistakes. Can be used ready options from the Internet or specialized literature, find them will not be difficult, and we will tell about one interesting decision;

• Based on the sketch, the size of all elements is determined, and then it is necessary to draw a sheet of plywood. Competently place each element to spend the material as much as possible and rationally.

Cutting and assembly

The main works begin after marking, there is nothing complicated in them, nevertheless the instruction set out in this chapter will help to understand the process even better:

• First you need to cut all itemsFor this, it is used either an electrolovka, or a manual hacksaw with a small tooth. The material is very easily damaged during sawing, so in all lines it is necessary to apply a mixture of joinery glue with water in proportion 1: 2 and wait for the drying of the composition;

Important!
Working with a hand tool, do not press too much, it will make it possible to achieve maximum.

• After cutting, you need to carefully treat all the ends, for this, quite ordinary sandpaper, surfaces are aligned and curved to give elements greater attractiveness;
• In the sides cut the grooves under the doorwhich simultaneously perform the function of the cutting boards. In the middle there is a partition on which a bar is with grooves. You can do it easier: do not make a partition, and attach a solid door on the curtains, the solution depends on you;
• Next elements are fastenedIt is important to drill the holes of a small diameter before screwing the screws to avoid the appearance of cracks on the material. It is better to choose fasteners to be fastened to be unlikely to ready product, the caps are driving, after which they are closed with a putty under the color of the surface;
• Then you need to attach the doors if they are installed on the curtains. Also do not forget about the handles, with their help, the use of the bread will be much more convenient. Lastly, a protective composition is applied to the surface.

More often than) Palagitsa is stored or in a refrigerator or in a cellophane package. But most the best place A wooden bread box, which breathes and maintains a permanent moisture level is considered about storage of bread. This bread in it may not twist and do not worry for a long time. Such a wooden breadpage) (well) Of course, the mouse is easy to do my own.

How to make a wooden bread maker do it?

The interests of the manufacturer of the bread maker will need a riveting having a thickness of about 10 mm. For the breadth, it is preferable to sell, ash, oak and birch. It is not necessary to make bread from pine, so (that) there is in this case the bread will be saturated with the smell of resin. Excluding this will be needed one on wooden rails for the manufacture of flexible lid, fasteners and hand.

From the board you need to cut the bottom, upper bar and two sidewalls. Inside, take both sidewalls, you need to choose a semicircular slot so that a flexible lid can dangle over it. Better than goodbye grooves to make a mill. To do this, you can put a finger milling milling milling drill.

The lid is made of thin wooden plates that have the opportunity or shake on the base of the tissue, or insert the cord into the cord.

If you do not have a big surname, you can make the same principle to make a bunk breadbox.

You can buy a finished bread in any agricultural store, but much cheaper will cost the storage capacity for bread made with their own hands. There are many options; An experienced and even novice carpenter will easily make a model of wood, and the usual housewife will make it easier for its efforts from cardboard and bamboo rugs or from plastic bottle.

From wood

Wooden bread bag saves the natural level of humidity and is breathable, which allows bakery products For a long time do not worry. Also, spores of mold mushrooms are also much slower. And if you decorate it with decoupage, burning or art painting, it will also serve as a decoration of the kitchen interior.

Tools and materials

For the manufacture of bread from a tree, you will need:

• Carpentry glue.
• Board with a thickness of 10 mm.
• Thin wooden strips measuring 340 x 25 x 6 mm.
• A small cut of linen canvas.
• Saw-knife.
• Grinding machine or slice of sandpaper.
• Electrolovik (if it is planned to manufacture a curly rear wall).
• Mill. In the absence of such, the drill with a finger milling cutter.
• Sculpture and self-tapping screws.
• Rule, circus and pencil.

Production procedure

Make a breadboard with your own hands is easy if there are minimal skills of working with wood:

1. Marking. With the help of a ruler and circulation on the side of the board, which will be invalid, draw the outlines of the bottom, side and rear walls, the fixed part of the lid. The drawing is given an image of a conventional rectangular back wall, but if desired, its top can be made carved. In this case, the rear width is left the same, and the height increases.
2. Druple. The board is collected by the outlined lines. If necessary, curly parts are cut with a jigsaw.
3. Preparation. On the side walls on the inside there are grooves for which the movable lid will move. Also on them are cut out to connect. In the bottom duties the grooves for fastening the side walls. In the upper stationary part of the lid, the folds are chosen for fastening the back wall and make grooves for connecting to the side walls.
4. Grinding. All parts are treated with grinding machine or emery.
5. Making a movable cover. Wooden strips in the amount of 13 pieces with a joinery glue are fixed to the fabric so that the edges of the right and the left of the fabric are approximately 1.5-2 cm. The planks should be close to each other. Instead of joinery glue, you can use furniture brackets. In order for the breadbox in the future it was convenient to close and open, it is worth a handle to cover or just glue a small piece of wood.
6. Assembling bread beds. All parts are connected to each other with glue and screws. It is necessary to ensure that the side walls fit tightly to the bottom, the lid and the rear wall. It is extremely recommended to perform a blessing compound, since the permanent influx of air from the outside will cause the rapid bread coherence.

When all the basic works are completed, the breadbox can be decorated at its discretion. Most often it is covered with varnish or impregnated with linseed oil. Inside the tree is not treated.

It is best to make a breadfinder from birch or linden, ash is still suitable and oak. But it is undesirable to use pine, because the bread stored in it will acquire a resinous, coniferous smell.

From cardboard and bamboo mats

Such bread maker is the cheaper consumables and ease of execution.However, due to the lack of tightness, it is not able to provide storage of bread for a long time. Also, its size will be limited to the size of the rugs, so it will not work much.

Tools and materials

Before proceeding to work, you should prepare:

• Scissors or stationery knife.
• Awl.
• Needle with threads.
• Bamboo mats.
• Glue gun.
• A piece of corrugated cardboard. You do not need to buy a new sheet, you can use the clean and whole box of large. However, you should not take boxes from household chemicals and other things that have a strong smell and are unsafe.
• Self-adhesive film.
• Flat decorative cord, narrow and dense lace or other material for editing edges. Needlewomen who own knitting skill can assign edges around the perimeter with a crochet using cotton or viscose threads for this.
• Rule and pencil.

Step-by-step instruction

Manufacturing a lender from cardboard does not take much time:

So that the bread is better kept, before placing it in such a breadstone, it is worthwhile to wrap loaf with a flax towel or a napkin.

From plastic bottle

The bread box made of plastic bottle is not intended for storage of bread. It is put in her sliced \u200b\u200bproduct immediately before serving on the table.

Tools and materials

In order to create this masterpiece of needlework art, you need to buy or find at home:

• A five-liter bottle of rectangular shape with smooth walls. Bottles with various concubuses and bulges, too ribbeds are not suitable.
• Acrylic paints. Their color can be chosen to their taste, picking up a beautiful combination. Recommended - Black, Lilac and Golden; They will give the product vintage look.
• Scissors.
• Acrylic lacquer.
• Tassels.
• Newspapers.
• PVA glue.
• Multi-layered napkins.
• Glue gun.
• Transparent Scotch.
• Handrestling of half pea.
• Rule and felt-tip pen.

Work description

The process of creating such a lender will require adhesion and accuracy:

• Cutting the main parts. This stage consists of several actions:
  1. Cut off the bottom and the neck where the ribbed part begins.
  2. A ruler on two parallel side parts of the bottle in several places are measured by 8 cm, making a marker marking. All marks are connected to one line, on which then cut with scissors.
  3. The bottom is cut exactly in half and cut out concave parts.
  4. A narrow neck is cut off the neck so that the billet in the shape of a cut cone remains.
• Start assembly.Two semicircular details that turned out from the bottom of the bottle, scotch tape on both sides of the "boats", resulting from the side part.
  
• Glooming with newspapers. To do this, they are cut by strips, and the glue is bred with water in proportion one to two, after which the plastic blank is in two layers. The newspaper coating should be both outside and inside. The same is done with the cone-shaped detail.
• Creating curly edges. In the upper edge of the parts of the boat and the bottom edge of the cone, semicircular waves should be made. They are cut off with scissors, and so that semicircular protrusions turn out to be the same, use as a pattern or a circle carved from cardboard.
• Decorating bread bed. Occurs in several stages:
  
• Staining. First, the entire surface of the shelter is covered with black acrylic. On top of it, harnesses and peas are painted in a dark lilac color, and after drying, gold paint is applied on bulging.
• Varnishing. At the end of the bread lacquer and after drying, the varnish is used for their intended purpose.

The bread box, made with his own hands, will delight the owners of the house and surprise their guests, because if you show a fantasy, such an object will be exclusive.