How to make a transparent floor of the girlfriend. Garden tracks from priest materials. Plastic Spoon Decor

Today, the choice of registration of your home is limited except that the fantasy and the depth of the wallet. However, even an abundance and diversity, we remain and continue to look for new and experiment with the already found. Naturally, such experiments do not bypass the face and the sphere of flooring.

In this connection, we suggest you familiarize yourself with the list of original flooring, which you without much work and costs can decorate your own home.

Wooden floors.

The reasons why sawnwood are harvested by sawing tree trunk along, and not across simple and understand even to the child. However, our first example suggests the originality to go against banal logic.

The technology is simple: to heat the blanks of one height, lay out on a flat floor and glue. Next, it remains to span the surface of the disks, the space between them is filled with grouting or smaller discs and coat all polyurethane.

Now imagine what kind of beauty can be achieved using discs of different wood species!

Coin floor.

For a whole year, you folded the finished in my pockets in my pockets in the piggy bank and are now ready to smash the crowded pig and raise from the soul? Do not rush to spend your savings for all nonsense. There are more original way Applications. However, it will be for coins - new or out of turn - to solve you. You can develop the idea and replace the "trifle", for example, buttons or bottle covers.

Unlike the floor of the wooden disks, the work is not completely dusty, but very painstaking. Special attention should be paid to surface alignment. Cracks and irregularities should be sealed with cement and putty.

Lay out the currency (in the literal sense of the word) mosaic can be immediately on the floor, but it is much easier, after breaking the floor area into squares, work on the table and collect patterns of parts on self-adhesive paper. And then to transfer this non-monitoring puzzle to the floor. At the end, pour it all with an epoxy sealant with a UV blocker and leave dry. By readiness you can play the episode from the cartoon "Golden Antelope", riding the floor and the question "pretty!"

Paper stone floor.

All ingenious simply. In contrast to the previous methods, here carelessness in work is not only not yet reborn, but rather, it is welcome. We take the usual packaging paper, faming it and leave for the night under the press.

Then paper blanks straighten and failed glue, in half mixed with water. Shelving sheets definitely lay out the venge in order to get drying they did not spread. When laying moistened paper on the floor, you should press it as close as possible. We give dry, cover the veneer and the next day process the floor with the same glue solution. We wait for the complete drying of the surface and cover all the parquet varnish. Ready.

Fabric floor.

In general, the technology of manufacturing such sex has been many-many years. That's just the last decade she ceased to be in demand and fell out of sight. Well? All new - well forgotten old. As it is easy to guess, the peculiarity of such a floor is a textile cloth with a pattern or pattern.

The bars of the sliced \u200b\u200bfabric are attached to the floor using PVA glue (in the case of a solid web, it is enough to glue the material around the perimeter). It is important when processing get rid of the folds and drive out the air, because Any irregularity on the surface will inevitably lead to a speedy wear - elementary cracking. The glued fabric is also desirable to smooth out the iron. Now for two weeks, every 2-3 days we cover the floor with parquet varnish. 5-7 layers of varnish will give your sexual strength and durability.

As you can see, such floors look very original and unusual.

Of course, in one article it is impossible to tell about all the varieties of flooring. By the way, we did not try to do it. We just offered you a few interesting decisions In the hope that now your playful fantasy will tell you how else it could be expanded by this list. But before you proceed to the case, look in the section"Floor and floor coverings"on our forum. There will definitely find experienced specialists who will tell you the Good Council and help to avoid mistakes in the incarnation of their ideas to life.

Today, a beautifully executed 3D drawing on the urban asphalt immediately turns the street or an area of \u200b\u200bthis attraction. So why not decorate your home so masterpiece, especially since, having certain skills and possessing great patience, this can be done without resorting to the help of specialists?

What is three-dimensional floors

3 d. Floors - This is a variant of bulk polymer floors with such excellent operational properties, as high resistance to abrasion, environmental friendliness, ease of care, antistaticity, optimal thermal conductivity Immons, due to the lack of weak points (joints and seams). And also, they are incredibly beautiful and original.

"Three-dimensional" floors usually consist of three layers:

- images created by manually using paint or other materials;

- Finish layer.

What materials and tools are necessary to create 3DPOL

In order to appear in the house with an unusual and fashionable design Paul, you will need to purchase the following consumables:

- cement;

- a solution of PVA dispersion in proportion of 1 l PVA to 10-15 liters of water;

- epoxy resin and hardener, and even better compound, which is a ready-made combination of these two components.

In addition, it is necessary to decide on the design and acquire the appropriate materials for decorating. For example, in this capacity a vinyl film can be used to the image applied, acrylic paintsIf it is supposed to paint the floor manually, or a variety of minor items: pebbles, shells, coins, beads, dried flowers, chips, spikelets, ceramic figures, etc.

As for the tools, you should have at hand:

- machine for the production of grinding work on concrete coatings;

- powerful construction mixer or drill;

- home or industrial vacuum cleaner (depending on the floor area);

- spatulas;

- fur and needle rollers;

- Flat brush.

Procedure for performing work

Work by creating 3.d. Paul in the apartment Consists of several stages:

1. Stage First

Remove the old coating from the floor, dismantle the plinths and doors. If we are talking about a room with high humidity (bathroom, sauna, etc.), it is necessary to install waterproofing.

2. Stage two

The concrete base of the floor is grinning and fill cement mortar Cracks and chips. Carefully remove the dust of the surface of the ground floor and output oil spots. With the help of the fur roller, the primer is carried out (in two layers) and leave to dry about a day. They monitor the floor to have minimal humidity, and better was absolutely dry. Moreover, ignoring this circumstance is tantamount to the fact that all the works will go to the pump.

It is impossible to allow the bulk layer to clutch with the walls of the room, since, for example, when the building of the building is not excluded when the appearance of cracks is not excluded. To avoid this, on the perimeter of the room along the connection of the walls and the floor, they make a damper tape thick, equal to the height you are filling the floor.

3. Stage Third

Apply the base layer - a screed or polymer. Moreover, if it is assumed that the floor will be decorated with small items, then a polymer is used, which should be the background "drawing". Check the level of flatness.

4. Stage Four

This stage is the most interesting and requiring creative approach. If it is supposed to use the finished image, then it is printed on the fabric used to create bankers. It is advised to make a drawing "with a margin", i.e. its size should be slightly exceeding the size of the floor. By the way, a good choice - Drawing in the form of some convex texture or imitating a green lawn, on which blades are distinguishable.

You can also invite an artist-professional, which with the help of polymeric acrylic paints will apply to the base layer 3 d. picture. After the image "dries", it should be covered with a protective layer of varnish.

An unusual solution is to lay out on the floor pattern with small objects, sand, coffee beans, pebbles, etc. Before starting decoration, the floor must be pouring the polymer and until he "grabbed" to form the desired three-dimensional image. It is very important at the end of the work to close in the window of the window and lock it, pending, at least for two days, so that dust fell on the surface of the image. Then the floor is poured with a layer of transparent polymer with a thickness of 2 mm, processed by a needle roller, and the room where the repair is produced is preserved for another 48 hours.

5. Stage Fifth

Apply a thin finishing layer (0.5 mm thick). To do this, an ready-made compound is used or a transparent polymer is made independently, mixed homogeneity (can not be allowed to form lumps!) Epoxy resin with hardener in a 2: 1 ratio. Since usually after 40-45 minutes, the mixture begins to thick, it should not be prepared immediately, and in the process it is necessary to mix it in the process. The polymer is distributed over the surface-processed surface and rolling the needle valikomdla to remove bubbles until the moment when the message starts to be lazy.

6. Stage Sixth

After completing the work, the room can be preserved for 1 week, pre-wrapped the windows to protect the floor from direct sunlight.

7. Stage Seventh

Cover the floor with a transparent varnish. Waiting for full lacquer drying.

Masters who have extensive experience in creating bulk floors, recommend listening to such advice:

- To avoid injury and not spoil the floor of the work, you need to produce in rubber gloves, putting the respirator and paint accessories (special ships on spikes) and changed in overalls.

- During the work, the floor should not be too cold (the surface temperature is not lower than 10 degrees).

- When sticking the vinyl film to which the drawing is applied to be very careful to not break it. Sticking should be started from the center, stroking the soft woven napkin towards the walls of the room

- The image applied to the paper base is glued to the surface, lubricated with glue or a thin layer of primer.

- to check whether the picture will not lose appearance After applying the polymer composition, you need to apply it to the edge of the canvase or paper drawing And wait until dried. If the image is changing (blurred, changes the color, etc.), then the entire floor with the applied (glued) pattern is covered with a thin layer of PVA-glue, to allow the absorption of the polymer composition.

- For the finish coating, a varnish with anti-slip properties is best suited.

- You can not try to make a knee epoxy resin And manually hardener.

— 3 d. floor In any interior, it becomes a dominant design element, so the design of the walls and the ceiling must be seamless to it, both in terms of style and colors. The remaining interior items (lamps, furniture dr.) Also should not be dissected with a floor pattern.

The main disadvantage of such floors is the complexity, and sometimes the impossibility of dismantling them, so if the result is unsuccessful due to non-compliance with technology or low-quality materials, then it will have to remove the floor almost with the top layer of the base.

Video about how to make 3D floors do it yourself

What is the bulk floors of 3d?

Decorative polyurethane floors 3D differ from ordinary bulk floors with their appearance.

The technology of application of decorative floors is the same as that of ordinary polyurethane, only on the base layer will need to be applied the pattern, which, when coating the finish polymer layer, forms a three-dimensional image from you under your feet, depending on the thickness of the finish transparent layer.

The decorative layer can be created from colored sand and diverse natural materials. Make bulk floors with their own hands, according to experts, it is quite possible. And if there is no desire to bother with the layering of the polymer, you can apply mold marble. He is also warm and looks great.

To work will be required:

a grinding machine for concrete floor (it can be replaced by an ordinary grinder with a diameter diameter of 18 cm);
industrial vacuum cleaner or household for small area;
construction mixer or drill with more than 800 W;
toothed and flat spatulas;
needle and fur roller, flat brush;
studded shoes for working with needle roller;
overalls, rubber and x / b gloves, respirator.

Materials for bulk floors 3d

Aligning mixture for creating the main layer
Finish transparent coating that gives decorative properties.
Protective varnish.
Solvent for polyurethane for cleaning tools.

How to make the floors of 3d do it yourself video

How to work with polymeric material?

We open the container with an opaque component and thoroughly mix it for 3-4 minutes, trying to capture the bottom layer and evenly distribute the pigment precipitate evenly.
We pour an opaque component into a bucket and slowly fill the transparent component to it (in order not to break the proportions, you need to monitor the remnants of the material on the walls and at the corners of the tanks).
Mix the mixture in the bucket until uniformity.

Please note that the mixed material must be used immediately, since the polymer floor has its own properties to keep a short time.

Approximate value of materials for creating a 3D floor

Title material	packaging	Cost per kg. in rubles.	Cost for packaging
Transparent polymer 2x compontune On epoxy basis	20kg (bucket)
Polymer standard colors	25kg (bucket)
Primer 2x Component on Epoxy Base	20kg (bucket)
Nail Polish 2x Component on Epoxy Base	10kg (bucket)
Self-immoving polymer cement floors	25kg (bag)

3d floors do it yourself, step by step instructions

1. Align the base of the concrete screed:

concrete base with grinding machine, protrusions by removing the bit or perforator;
fill the chips, potholes and cracks with a composition of cement or epoxy resin;
we clean the surface from garbage and dust with a vacuum cleaner;
remove C. concrete base oil spots if they are;
let the concrete or cement screed Fully dry (with a large humidity in the room, further work cannot be carried out).

2. Bent concrete base

we use primer, deeply penetrating the base and fills all the pores in the concrete (it will improve the adhesion of concrete and bulk gender 3D);
the primer is applied with a flat wide brush, a spatula or roller with a short pile, first one layer, and after a certain period of time, which is necessary to dry out the first layer - we applied the second layer of primer;
we leave the primer to dry, at least 4 hours, but not more than a day.

3. Apply the base layer of 3D floors

around the perimeter of the room along the walls, around the columns and protruding elements by fixing the damper tape;
fix at the desired lighthouses, the correctness of which we check the level or level;
prepare a solution for the floors of 3D (in the container fill 5-6 liters cold water and fall asleep bag-25 kg of dry mixture, mix the electromyer 5 minutes before the formation of the alkaline homogeneous mass, we leave for 5 minutes, and then mix 2 minutes once again), consider that the overdose of water leads to the separation of the floor and reduce its strength;
the mixture is distributed over the surface of the pump or manually, then we will recall the rule or T-shaped rail;
to remove air bubbles, after the fill of each portion of the mixture, we pass on the surface with a needle roller;
the surface is equalized by the rule and control the flatness of the base layer of the floor 3D level;
on the weak base, the fill thickness must be more than 30 mm, it is necessary to remove drafts and direct ingress of sunlight, and it will be possible to walk on the surface in only a few hours;
we leave the base layer for 24 hours for polymerization.

4. Apply the image

decor is applied to the base layer or an image that can be applied with paints (polymer or acrylic paints is resistant to ultraviolet, it looks great, but the application of such a 3D picture will require the artist's talent), while you need to give paint to dry, apply a protective lacquer to the image, and Already then apply the following layer of 3d floors;
can be pasted on the base layer The pattern selected on the Internet and printed on a dense carrier, such as vinyl film or banner fabric (you can print the image in the printing house, the main thing to order an image with a large size than the coating itself, since the surplus can always be cut off, but Hide gluing places is impossible);
before applying the image with a primer base layer, we use the finishing transparent polymer layer for primer, which includes in proportion 2: 1 Solvent 646, soaked with a flat brush or roller (for 1 sq. M base will leave 300 grams of the primer solution);
we leave the primer to polymerize for a day;
next to the surface, we stick a vinyl self-adhesive film with a pattern, carefully pressing and smoothing the film (the drawing on the banner tissue is glued with a glue from a thin layer of the finish coating);
coin, fluorescent components, sequins, etc. can be applied as decor to the floor.

5. Apply the finish coating

the thickness of the finishing coating should not be less than 3 mm, on average, 1 sq m will need 4.5 kg of transparent gear 3d polymer;
we mix the components of the transparent floor in the bucket (for example, the Elacor-ED consists of a base and hardener) a drill with a special nozzle;
evenly spill the mixture on the russunk on the floor and recall it;
to remove air bubbles, we roll with a needle aeration roller on this layer, we continue to rolling until the thickening starts (from 15 to 30 minutes), moving along the floor at the same time it is possible in shoes with soles on high spikes;
to the floor acquire the maximum strength, its surface can be closed with a foil or polyethylene film;
we leave the finish layer to stick one day or two (see time on the packaging bar);

6. Apply a protective varnish

multiprotect type varnish will protect the floors of 3d from damage, will extend their service life and will not give absorb dirt;
we apply a lacquer with a thickness of 2-3 mm, the flow rate of the varnish is not more than 150 grams per 1 sq. M;
within two days after applying, the floors of 3D can be used.

The non-dedicated material can be washed with a solvent or solvent, and the cured is removed only by shot blasting and sandblasting, grinding.

Approximate calculation of the cost of measuring materials 3D:

Consumption by 80 sq.m. :
Primer - 1 Toping set Paul 205С 5 400 rub. +7 l Solvent 450 rubles.
The intermediate layer of one millimeter will require 4 toping sets 205c x 5400 \u003d 21 600.
Price of vinyl film for room 80 m2 (approximately 1 000 rub. Per 1 m2) \u003d 80 000 rub.
Finish layer 2 mm - transparent bulk floor Toping gender 205 at a set of 9520 rubles. (18 kg.). 80 sq.m. It will take 12 sets of a total value of 114 240 rubles.

Total: 3D floors per 80 sq.m. 2 mm thick. cost at 221,690 rubles. while creating outdoor coating do it yourself

From this calculation of 1 sq. M of floors 3d costs 2771 rubles

Technology for creating polymeric floors video

Roman curtains people enjoy many centuries. And during this time they did not become less popular. This is explained by the fact that the design of the curtain is extremely simple. Such a curtain can be made literally from the girlfriend.

Roman curtains help make the design of the room unique and protect the room from sunlight.

Curtain reminds its sail. The finished porter looks like a rectangular cut of a tissue or other material, stretched on transverse rails. Due to this, the curtain can be raised and lowered.

Selection of material and design type

Modern Roman curtains are multifunctional. In my homeland, these curtains are intended to protect the room from bright sunlight. In addition, they prevent the penetration of hot air into the room. Therefore, they are most often sewn from dense and sufficiently dark fabrics.

Measures window for sewing Roman curtains.

But now the Roman curtain can serve as a fashionable design detail of the window. So it is sewn and from light translucent decorative materials. Specialists recommend decorating with similar curtains narrow and high window openings. They are indispensable in small roomsFor example, kitchens. This design does not block the space. At the same time there is no risk that the random gust of the wind swells the chart.

For windows in bathrooms and kitchens, a porter is suitable, stitched from a material with water-repellent impregnation. This will provide ease of curtain care. In addition, such a curtain will not absorb fat, dirt and moisture. If you chose exactly this option of the Roman curtains, it is not necessary to buy a specialized fabric at all. The porter can be collected from the finished polypropylene tablecloth or shower curtains.

Such infrid materials differ also in different textures. They can be smooth or dilated, embossed or a slit pattern resembling lace. Therefore, the curtain will turn out not only functional, but also beautiful.

Diagram of the cornice device for Roman curtains.

The design of modern Roman curtains can be two types:

The curtains are located inside the window opening (the cloth is almost the window).
The curtains are mounted on the slope of the window (curtains wider opening about 10 cm on each side).

Each of these models have its advantages and disadvantages. With a narrow porter, the room is difficult to ventilate, as the curtain interferes with open the window. The design with a wide curtain can be quite cumbersome and heavy. It is difficult to add, and long transverse rails in the assembled state fall unevenly.

Removing the measure for sewing

But the choice of the model depends on the tastes and the preferences of the owners. From the design depend on the types of measure that you need to remove for sewing.

That is, you will need the following measurements:

Types and styles of the Roman curtains.

distance from the lower edge of the cornice to the floor;
distance from the lower edge of the eaves to the window sill;
the width of the window opening (excluding the width of the curtain);
the width of the cornice from one wall mount to another.

If you are going to sew a narrow slope, which will be mounted inside the window opening, then the last measure will become the main one when determining the width of the porters. But the Roman curtains are good because the fastening type can be chosen at their own request.

The classic curtain of such a design is mounted on the cornice bar, which has been done in specifically for this provided by the scene. But now you can buy flat fasteners. They look like plastic panelwhich is fixed on the top frame of the window or window opening. Its surface is a Velcro tape (Velcro). The second half of the braid is sewn to the curtains. In this case, the width of the panel depends only on your desire.

Usually, the Roman curtains are lowered to the windowsill or slightly lower it (about 10-15 cm). But if you wish, you can sew a long curtain. Only in this case it is worth considering what long curtain, the higher the load falls on the lifting mechanism.

Building a pattern of curtains

The example waste for the Roman curtains.

To make Roman curtains do it yourself, professional sewing skills are not required. The main difficulty lies in the competent construction of the pattern and calculate the folds.

Cutting tissue occurs on dotted lines. Naturally, you can build a pattern by own sizes, but the masters advise to adhere to the specified proportions.

To calculate the depth of the folds, the following formula is usually used:

Curtain length / (the number of transverse regches * 1.5 cm)

On this calculation, 1.5 cm is a breakdown to the slash. For example, the length of the curtains is 145 cm, and the horizontal attachments are provided 7. In this case, the calculation looks like this:

145 cm / (7 * 1.5 cm) \u003d 13.8 cm

But it should be noted that this calculation provides for shallow folds (classic option). The milets can be built on the basis of personal preferences. There are curtains with folds of 30-40 cm. At the same time, all the product looks great.

Table of calculating the folds of the Roman curtains.

As a rule, such curtains sew from 2 identical cloths. At the same time, 1 cut is the front side of the curtain, and the second is an invalible. Rail stories are formed using oblique beacks, stolen from the wrong side.

But if you make a porter not from the fabric, then the attachments can be external. It is this method of fixing is shown in Fig. 3.

In such a case, instead of the scenes, use the reinforcing tape (for example, a trouser or a curtain). Rings are shed on the braid, and they have a cord that replaces the rail.

Sewing Roman curtains

For sewing folding porter, you will need the following materials:

The scheme of manufacture of the Roman curtains.

basic and irons (nonwoven canvas);
laying for the scenes (in case of sewing curtains made of fine material);
reinforced threads;
reiki (can be replaced by flexible metal or plastic rod);
rings and cord;
stoporks for the ends of the cord.

In order to make the lines in the manufacture of pockets, it is neat, use a special leg sewing machine. It is intended for the formation of the scenes and feeding the cords. And to form places for the fastening of the rails at an equal distance from each other, the guide ruler will help you, which is attached to the carriage.

Pockets for fasteners are enhanced by gasket (fliseline or dublerin). If this is not done, then the fabric stretched on the rail will quickly come into disrepair. Threads for sewing is wiser to use reinforced or with silk fiber. Then the curtain will last you much longer. This rule applies to the manufacture of a porter from nonwovens.

The pattern for the Roman port is not necessarily made separately. Everything required marks You can apply directly to the fabric by the tailor shallow or a piece of dry soap. If you sew a pad with a lining, then you can paint both panels at the same time. The fabric folds in 2 layers, the markup is applied only by 1 canvas. Then both pieces are cut together.

Cutting and tailoring curtains from nonwovens (polypropylene tablecloths) is no different from the manufacture of curtains from traditional fabrics. But it is worth remembering that there are holes from needles and pins on such a canvas. Therefore, it is not recommended to pre-spin or lent them.

Production of rising curtains

Fold both web faces to each other, scroll around the perimeter by pins. Lay the line about 1 cm from the edge of the fabric. First burst the lower edge of the curtains, and then the side sections. The top remains open. If you have chosen to sewing the port thin materialThe battery is cut close to the line.

The billet turns on the front side. The edges are affected.

Please note that the curtain of nonwoven material is impossible.

In this case, it is enough to spend along the entire length of the seam of nail. Curtains pulls along the seams at a distance of 0.5 cm from the edge. In this case, you can use threads of contrasting color.

Next, pockets under the planks are formed. The first must be made of a row under the bottom weighting rail. From the lower edge, the curtains are laid off the distance equal width plus 0.5 cm. The allowance is sweeping on the wrong side and adjust. It is wiser to use a double line. So all the product will be more reliable.

Then place the location of the transverse speakers. The labels are better to apply the curtains with the front side, then the line will be careful. Next adjust the oblique beyk or curtain tape. It is they who will form a scene in which the rail will be inserted. Typically, the width of such a tape is 2.5-3 cm.

Lastly turn the top edge of the curtains. Punches are bend on the wrong side, they are climbing and affected. The width of the bend should be 2-2.5 cm. From the wrong side, it is applied to the half of the Velcro tape and admonish it, grabbing the filing of the fabric. At the same time, the edge of the Velcro should perform above the curtain cut. In pockets completely finished curtains Insert rails.

turn

Today it is difficult to introduce the repair of your own dwelling without a qualitative design of sexual basis. To date, the floors of 3D are greatly popular - a transparent bulk floor.

Bulk transparent structures differ from the standard fact that the floor surface represents a three-dimensional image. In this case, in addition to the base layer, a decorative, forming a certain picture is created. Floors like a design are perfectly suitable for the kitchen, hall. Half 3d are also covered with a special finish layer, which ensures the protection of the image from wear, contributes to the formation of a three-dimensional type. The most organically looks such a floor, of course, in the kitchen.

Benefits of flooring

Floors 3D will look great in office space, residential buildings, Country cottages, shopping centers. Decorative sexual designs can be arranged with their own hands using any colors gamma, images, photos. Such a gender finishing technology makes it clear any human fantasies.

In the room, you can organize images of his favorite characters from animated films on the floor.
In its own bedroom, the floor surface can depict any picture of the famous artist.
In a room for guests, you can create a large melan for guests.
For office space, an excellent marketing solution is an image on the outdoor surface of the corporate sign, the company's logo.

There are many interesting things design solutionswhich can be applied to finishing a sex base with your own hands.

Mounting technology do it yourself

Many people to create such sex prefer to use the services experienced masterswithout suspecting that such a finish can be easily done with your own hands. To do this, you just need to correctly distribute the working steps, have certain tools, follow the installation technologies, listen to the recommendations of specialists.

Required tools

Grinding unit.
A vacuum cleaner.
Construction mixer (drill with a mixing nozzle).
Roller, tassels, spatula.
Solvent, varnish.
The mixture for filling the base base.
Transparent mixture.

Listed decoration Materials, Construction tools today can be easily buying both in special shopping centers for building goods and through online stores.

Preliminary works: level alignment

Any finishing work always begin with the preparation of the foundation. So before finishing the floor, alignment should be carried out, the preparation of the foundation is the first stage of repair work.

Alignment of the surface is carried out using a special grinding equipment, but if it is not available, you can use a grinder (for grinding, stripping special nozzles are sold).
Next, all defects formed on the surface of the base are removed. This task can be solved by any infrident building tools. After removes all the bulky garbage, the vacuum cleaner is going fine.
From a concrete surface it is recommended to remove bold stains, cement screed to give to harden. The primer layer is applied to the surface (it is recommended to use a deeply penetrating mixture). The primer should get into everything, even the smallest cracks at the base.
The primer mixture can be applied with roller, in hard-to-reach space with a tassel. But, one primer layer will be little.
Before the installation of the next bed, the primer must be given to solve the first. Only then can be confident that the transparent bulk sex will be organized with their own hands at a high quality level. When the surface is thoroughly dry, you can perform further tasks.

Laying the main layer of solution

From the quality of the holding construction work At this stage, reliability will be dependent subsequently the entire sexual design.

A damper tape is fixed along the walls, beacons are set up by level.
A filling solution is prepared according to the instructions that can be found on the package. It should turn out to be homogeneous fluid mass, not quite liquid, otherwise the frozen concrete will lose the strength characteristics, which will lead to the destruction of the base.
The prepared mixture is evenly distributed over the base of the floor, it is leveled with a needle roller (contributes to the removal of air from the solution).
With a solid rail, the final alignment of the main layer is carried out. For its full solidification, it may be necessary for about a day.

Application image

To apply on the image of the image, you can use the most various methods. For example, used of different types Paints, and after applying and drying, the surface is lacquered. You can use the finished image, photo on the dense material.

Be sure! Before applying the image, the base surface is ground, dries out throughout the day.

Finish coat

On this technology, only transparent materials are used for the finishing finish, which subsequently clearly consider the image 3D. The thickness of the layer is performed at least three millimeters.

All components of the transparent coating are mixed. To do this, you will need a separate clean capacity, a building mixer (drill with a mixing nozzle). The solution is spilled immediately uniformly so as not to break the features of the image.

Mandatory from the finish layer you need to remove bubbles with air with a needle roller.

To install the floor as strong as possible, it is recommended to cover it with a polypropylene film. The finishing layer solidifies full Approximately two days. Then the surface is opened by a specialized varnish. It is optional optional, but varnish will give the surface with additional strength. The thickness of the lacquered layer should be about three millimeters. This is enough for the strength of the coating, the protection of the entire sexual design from mechanical damage.

After the varnishing of the transparent floor design, finishing works are completed. And after its complete drying, rejoice in organized with his own hands on the floor of the art.