Propane cutter (work features)

They require a rather great effort from a person. Unlike them, metal cutting carried out using gas can be made even a newcomer in this matter. Putana cutter (gas) is so convenient tool that you can learn to work with him in a matter of days.

Features of work

In order to quickly and qualitatively cut the metal with the help of gas, it is enough to learn to keep the propane cutter in your hands. It simultaneously uses this substance and oxygen. The mixture of them just gives the greatest temperature necessary for constant burning. Propane cutter is intended for separating manual cutting of low alloyed and

Disadvantages and advantages of cutting propane

One of the main drawbacks of this type of cutting is that the edge of the cut is not so smooth, as using despite this, it is much cleaner than the resulting work with the grinder or another minus propane cutter is that many metals can not cut And alloys. They can only be used when working with low- and medium carbon 08-20g; 30-50g2) and with

Well, now we turn to the advantages of this tool. Propane cutter is used when it is necessary to work with a relatively thick metal. They can cut something on the template. This tool is especially indispensable when the curvilinear cut is required. It is necessarily used if there is a need to break through the deaf opening (20x50 mm) or it is required to cut a circle of a thick metal sheet.

The small weight of this tool provides the convenience of using it. Fire cutter is much quieter and easier than similar gasoline. Thanks to this tool, working with metal is carried out about 2 times faster. Unlike gasoline, propane is much cheaper, which reduces the cost of these works. Due to this gas cutting, most often used for large volumes (especially when cutting structures on scrap metal).

Scheme of work

To cut the metal, it is necessary to have a fissure cutter, cylinders with oxygen and this substance, high pressure hoses. Gas supply control is carried out using gearboxes. They should be located on each of the cylinders. At the same time, it should be taken into account that thread thread on the container with propane. The metal is cut under the influence of a thin jet of the hot flame generated by the cutter. During operation with this instrument, oxygen and propane mixed in a special mixing chamber. In this case, a combustible mixture of gases is formed. Recently, a propaganda "lighthouse" has been widely widespread. It refers to injection type tools. This cutter is propane, the price of which, depending on the modification, fluctuates in the range of 1300 -1800 rubles, has perfectly proven itself when working with large volumes of metal.

In the event of freelance situations, when working with this instrument, first of all overlap the supply of gas, and then oxygen.