How to open the SIG file of the State Service. Checking an electronic document: Easy way to open an XML file. Registration of discharge is required in cases


Checking the electronic document service allows you to form a printed representation of the extract obtained in in electronic format, and check the correctness of the electronic digital signature, which it is signed. If you need to get a printed view of an extract, just download the XML file and click on the "Check" button, then select the "Show File" function. If you need to check the correctness of the electronic digital signature, you must attach the XML format file obtained with it the SIG format file and click on the "Check" button. If you need to get a printed view of an extract, just download the XML file and click on the "Check" button, then select the "Show File" function.

Open the XML file statement EGRN with Rosreestra and get it in normal form

  • In a new window, you will see a normal document that can be printed or saved if desired. You managed to open an extract from Rosreestra XML! On this work with files is finished.
    • Recommendations
  • We remind you to use the site service federal Service You will not be able to an active Internet connection.
  • It is recommended to use Internet Explorer as a browser or Safari.
    Of course, other browsers will also allow you to carry out these operations, but you will need to set some parameters. Read more about them for each program will be further.
  • Open the browser menu (three horizontal strips in the upper right corner) → Settings → Show Advanced Settings → Personal Information → Content Setup or Enter the Chrome: // Settings / Content browser address bar and press ENTER.

How to print an electronic document from Rosreestra

The article is updated: April 3, 2018. On the Rosreestra website there is a special service for opening discharges (reference below). On the example of an extract for the apartment we painted detailed instructions, so repeat for us.


Also at the end of the article wrote a small additional instruction if the graphic plan is not displayed in the discharge.
  1. All files from the archive with the discharge place in a separate folder so that they are all in one place. You do not need to rename files, i.e. What files were in the archive, so let them remain.


    From the archive to a separate folder, we transferred an extract on an apartment in format.xml, a unique digital signature in format.sig and folder (1), in which there was a graphic plan of the apartment on the floor. Typically, the graphic plan is located inside the extract itself, but we have come from discharge separately (it can be seen in the picture).

How to see the XML file statement EGRN with Rosreestra

Extract from EGRN in electronic form in the archive folder received to you on email is two files - directly the extract itself and a file with an electronic digital signature confirming the accuracy of information. The first file can be viewed and printing, the second file is used to check the accuracy using the Rosreestratr service "Checking an electronic document" how to open an electronic extract from EGRN Step-by-step instruction Step 1.
Open the letter from Rosreestra and download the folder with files to your desktop. (maybe it falls into the folder "download" step 2. Unpack the archive using the archiver program (which must be installed on your computer). I open through Zip.

Electronic extract from EGRN how to open the file and print

Get an electronic extract from the USRP to get an electronic version of the applicant may be on the address specified in the application email. The document format will be in the form of an XML, which has the same legal force as the paper option.

Important

The electronic form of the document is affixed by a digital signature. Such a signature is valid and has an action in all state structures, so it can be recognized as official.

It is worth noting that some institutions request an extract only with the official stamp of Rosreestra and the signature of the person who issued the document. Free Extracting Service from EGRP is provided on a fee.

Checking an electronic document service allows you to form a printed representation of an extract obtained in electronic form, and check the correctness of the electronic digital signature that it is signed.

How to read the cadastral extract obtained in electronic form?

EGRN. Information collected information:

  • data from cadastral passports, drawings, land coordinates;
  • cadastral room room or land.
  • the area of \u200b\u200bthe site, its borders, the designation of them on the ground, if the intertime is carried out, allowed;
  • planning the room, its purpose is a residential or commercial, the size of the structural elements included in its composition;
  • cadastral value of real estate, approximate to market assessment;
  • date setting of an object on cadastral accounting;
  • the history of the rights to objects is the names of the owners, the advantage of the documents: contracts for sale, exchanges, donations, inheritance, privatization, the disposal of the state or municipal authority, etc.

How to get it ways to design an extract from EGRN set.

Documents Rosreestra in electronic form

If you need to get a printed view of an extract, just download the XML file and click on the "Check" button, then select the "Show File" function. If you need to check the correctness of the electronic digital signature, you must attach the XML format file obtained with it the SIG format file and click on the "Check" button. If you need to get a printed view of an extract, just download the XML file and click on the "Check" button, then select the "Show File" function. Select the type of organization. Their quality should be such that the ability to read the text of the document fully and determine its details. If information is placed on two or more sheets, in electronic form it must be represented as a single file. When creating electronic copies of documents, monochrome mode with a resolution of 300 dpi is used.

Easy way to open an XML file statement of Rosreestra

    Meeting Plan (version 04, 05, 06)

  • Technical Plan (version 02, 03)
  • EGRN: statements of the memory and ox: brief and complete (version 07)

Instructions: Use the Overview button to select the source XML file or a zip archive containing one or more XML files, click the Print button. After that, the page will be updated, and a printed document will appear on the screen.


If the Time Out error occurs, check the checkboxes.

Print XML files of cadastral extracts, passports, cadastral territory plans

Here, an extract from the register of registered contracts of equity participation, it is very big. If you have ordered an extract with publicly available information on a registered real estate object, the file size will be less. Step 3. Move the file from the discharge and EDS (electronic digital signature) to the desktop.

This is what it looks like me: Step 4. Open the Rosreestra site, services - Checking an electronic document Step 5 Download the files to the Rosreestra site to convert to readable format and authentication. Do not confuse files! Step 6. Go to verified files Step 7.

The window opens. Please note: Check is successful. Step 8. Show in person-readable format. Here it is possible to print an extract or save in the "right" format. Order an electronic extract from EGRN Detailed step by step instructions: Extract via the Internet.
The list of documents to obtain an extract from the USRP will require the following types of documents:

  1. Statement.
  2. Applicant passport.
  3. Receipt of payment of the required amount of duty.
  4. Notarized power of attorney if the request is done through the representative.

The application has certain requirements for the order of the Ministry of Economic Development of the Russian Federation No. 504 of September 22, 2011. Open the XML file of EGRN extract from Rosreestra and get it in a normal form for this added fields "Add Raster from a Public Cadastral Card" and "Add Raster - Space Snapshot" . Automatic transformation of printed documents to PDF format. For this on the "Content" tab, a check mark "Automatically convert a printed document in PDF" must be installed.

This page explains how you can easily convert a .sig file to PDF file using free and easy to use PDF24 Creator. The described conversion method is free and simple. PDF24 Creator Sets the PDF printer, and you can print your.sig file on this printer to convert the file to PDF.

What is needed to convert sig file to a PDF file or how to create a PDF version of your SIG file

SIG files or files with extension.sig can be easily converted to PDF using a printer PDF.

PDF The printer is a virtual printer that can be used in the same way as any other printer. The difference from the ordinary printer is that the PDF printer creates PDF files. You do not print on a physical sheet of paper. PDF printer prints the contents of the source file in the PDF file.

Thus, you can create a PDF version of any file that can be printed. Just open the file using the reader, click the Print button, select Virtual PDF printer and click the "Print" button. If you have a device reading a SIG file and if the reader can print a file, then you can convert the file to PDF format.

Free and easy to use PDF printer from PDF24 can be downloaded from this page. Just click on the boot button to the right of this article to download PDF24 Creator. Install this software. After installation, you will have a new printing device registered in Windows that can be used to create PDF files from your.sig file or converting any other file with the ability to print in PDF format.

That's how it works:

  1. Install PDF24 Creator
  2. Open.sig file using a reader that can open a file.
  3. Print the file on the virtual PDF24 PDF printer.
  4. The PDF24 assistant opens a window in which you can save a new file as PDF, send by email, fax or edit.

Alternative way to convert Sig file to PDF file

PDF24 provides several online tools that can be used to create PDF files. Supported file types are added as arrived and, possibly, the SIG file format is also supported. Conversion service has different interfaces. Two of them are as follows:

Online PDF Converter from PDF24 supports multiple files that can be converted to PDF. Simply select the SIG file from which you would like to get the PDF version, click the "Convert" button, and you will receive a PDF version of the file.

There is also an e-mail PDF Converter from PDF24, which can also be used to convert files to PDF format. Simply send a message to the E-mail PDF Converter service, attach the SIG file to this letter, and after a few seconds you will receive a PDF file back.

Not all, but very many users of modern computer systems are often faced with incomprehensible XML. What is this data and why they are needed, knows even less users. Well, what program to open understand generally units. Although everything is quite simple in this matter, nevertheless problems sometimes arise. Let's see what.

XML format - What is it?

Let's start with the fact that the XML format is the type of data created using the Special Language of Extensible using commands that include a descriptive part of the properties or settings of some object based on tags and attributes.

If you say a simple language, the XML format is textual and something resembles hypertext HTML markup, which is widely used on the Internet. Therefore, a preliminary solution to the problem of how to open an XML file in readable form can be the use of almost any, even if the most primitive text editor or the viewer. But everything is not so simple, because the files themselves can have a completely different purpose.

What is the XML files?

Before you give an answer to the question of how to open the XML file in normal form, find out what such data types are needed.

First, they may contain quite large amounts of information, for example, musical or video collections located on the Internet. The files themselves resemble ID3 tags, which are used in MP3 files and contain data on the name of the artist, album, year of release, genre, etc. As for the XML format, these files have the possibility of adding data almost not limited, and represented Information may relate not only to a single object (track or film), but also the whole of their totality (albums, collections, etc.). The only limitation is the limit of the maximum possible number of rows in the text. That is what often causes problems when opening.

Secondly, such files are very often binding to specialized programs, and text information contains data on some important settings of the application itself or the parameters specified by the user. For example, in any music program you can install your own parameters for some other or more tracks, after which you save them as a custom template. And saving, as already, probably, it is clear, is exactly in XML format.

How to open the XML file in normal form: the simplest method

Now look at the most easy option Opening of files of this type. For example, take a Windows system. As a rule, the association is not specified for this format by default. As a consequence, the inability to open the file with double click.

On the other hand, even if you apply such a technique, any modification of Windows will initially provide a list of several of the most appropriate applications or suggest the user to specify the executable EXE file by viewing.

The first thing that comes to mind is due to the fact that the format is text, - the choice of the editor of exactly this type. In the list of programs, one of the first (if not the very first) is proposed standard Notepad - an application included in the mandatory set of any modification of Windows.

However, if you solve the problem with how to open the XML file in normal form, you can first start the "Notepad" itself, and then use the opening command from the file menu or the standard Ctrl + O application for all applications. It goes without saying if this option is convenient , In the Software Selection menu, you can set the use of this method for all files of this type or in the menu item itself select the desired program that will later open this default format (double click).

You can, of course, to view the use and any Internet browser, but now it will not be possible to edit the data - just view in the form of text, no more.

How to open an XML file in readable form: Optimal programs

However, just just a simple matter is not limited. Similarly, you can simply use more powerful text processors like Microsoft Word. The XML file in Word will have exactly the same look as any other, for example, the TXT format.

But it is worth paying attention to the moment that alignment in Word, actually as formatting, is somewhat different from the standard "notebook". Yes, you can view or edit data, but the structure of the document with all sorts of special retreats (especially in the presence of sufficiently long lines) can be broken.

But what exactly, many do not know, so it is the fact that the problem, how to open the XML file in a normal form, can be solved even using the MS Excel tabular processor. True, then the restriction on rows begins to act. In other words, if the document contains too much data, the information is not completely displayed.

But if we talk about how to open the XML file in a normal form, that there is a readable and editable, then it is better to use original programs that allow you to create data from this type, but not all sorts of notepads, and special applications with language syntax support. Among them, it is especially possible to note such as Oxygen Xml Editor, Editix, Xml Marker and them like. Here it is necessary to clearly understand that such applications initially "sharpened" under the tongue and have much more opportunities compared to the rest of text editors, even if they are "cheap".

XML Opening Error

So, with the question of how to open the XML file in normal form, we figured out a little. Now we will analyze some errors while trying to open such data to view or edit. As a rule, the application used can issue a message that it cannot be opened to open an XML file, since the integrity of the desired object is impaired. There may be any reasons for this (for example, an unfinished or suddenly interrupted injection from the Internet).

Still may occur when it contains incorrect tags and attributes. In some cases, failures can be observed if the XML file is an email attachment. When you try to open in standard programs, such as Outlook Express, the file is preserved in the form of temporary data having a TMP format, and the program that is responsible for opening the desired original file, this extension does not understand. Therefore, it is better to first keep the investment in original video, and open after.

What to prefer to work with XML files?

So we figured out how to open the XML file in normal form. What to use? In the simplest version, any text editor or the same tabular processor will fit. But if editing is required, and even with the support of syntax, in order to avoid possible errors When entering commands without specialized applications, it is not necessary to do.

When files come from Rosreestra in XML and often they open without "design", that is, just text in 1 line.

Today we'll figure it out how to bring it into a "readable view"

How to open XML File Rosreestra in Internet Explorer 10,11

1. Run IE., Press alt.The window will appear on top of the window
2. In the menu that appears, select Service - Compatibility Presentation Mode Parameters
3. In the window that opens, set the checkboxes " Display all web sites in compatibility presentation mode"And click" Closedb "and close IE.
4. Run IE., Press alt.The window will appear on top of the window
5. In the menu that appears, select Service - Properties of the Observer
6. In the window that opens, go to the tab " Safety»
7. Choose the zone " Reliable sites"And press the button" Sites»
8. In the window that opens, press the tick " For all nodes of this zone, servers check required (HTTPS)", If stood
9. We introduce two entries to the list of the zone through the " Add»:
https: //* .rosreestr.ru.
http: //*.arcgisonline.com.
10. Close the window " Reliable knots"Through the button" Close»
11. Not closing the windows " Properties of the Observer»Switch to bookmark" Additionally»
12. In the first section of the list " Safety»
13. Remove the checkboxes from all lines of the section " Safety"What starts at:" Block …», « Warn …», « Check …», « Check …»
14. We put the checkboxes in all lines of the section " Safety"What starts on" Allow …»
15. Back in the Security tab, remove the checkboxes with " Enable protected mode»And the level of security is the lowest for all areas of the Websites.

If this method does not help, then we carry out the following:
1. Run Internet Explorer. and click " Alt."From above the window will appear menu
2. In the menu that appears, select " Service» => « Properties of browser»
3. In the window that opens, go to the tab " Safety»
4. Press the button " Other»
5. Long list are looking for an item " Access to data sources outside the domain"And put it in position" Enable«.

Conclusion:

After doing this operation, the files from Rosreestra are opened in the "readable" format with all design. I hope this article helped you. If problems or difficulties arise, ask questions in the comment, I will try to answer them.

mOB_INFO.