Adjustments grain seeder C3 3.6 a. Martyr - role-playing model. Setting the sowing depth

Your incessant inner dispute is to dwell or be above it. Your experience and insight are combined for the creation of a sage. Your experiments are hard and dangerous, but bring you an insight. You become an example and expert. Ultimately, your inner Sorvigolov simply refuses to further participate in this circus, which is why the circus dome immediately turns into a green hill - the beloved refuge of the wise men and the prophets. The soldier grows to the commander, a worker to the manager, an actor to the director. Profile representative 3/6 requires respect. He comes to people with a position "I was there, I saw everything, I can tell." For him, life is an eternal school. He comes to her a student, and finishes director. Agree to any experiments. Your sixth line is a guarantee that you get out of them alive and grab a piece of knowledge and experience with you.

Unlike 3/3, the profile 3/6 may be eager to expect the end of chaos. Most 3/6 grow old three times. In 18, 30 and 50 years. Torvan teen is getting out of a puberty period and comes in adult life already loaded with certain obligations. If the cargo is insufficient, it remains to the thoroughbred to 30 years. By this age, the number of scars reaches optimal. Whatever happens on, by 50 years, profile 3/6 becomes at least a decent role model.

By the 50s you climb the chaos of life and begin to feel like an observer. You are the smartest and proven person from everyone you know. Your contribution can significantly affect any business. The sixth line is capable of insight. She gives the third promise vision. It eliminates the third line from the breakthrough tactics inherent in her life. You are the real value that is difficult to overestimate.

In communication with people you are resolute and distinctive. This is a little soften with the third lines of humor. You are fascinating to such an extent that cause admiration. You make a deep impression by your mind and attitude to life. I am ready to advise others just find you and talk. It's worth it.

Aspects of a third line that does not tolerate any obligations, it is impossible to avoid. The need to know where the fireman here is better to support the knowledge where the mountain where the flood can be hidden. But the sixth line can control. It perfectly understands the inadmissibility of escape until the evil roasted rooster will be behind your back.

Profile 3/6 manages the internal balance. The more he clears, the better it controls. Therefore, it is important for you to learn to climb only in those situations that internally resonate with you. The inevitable period of bug, through which you pass, teaches you to recognize you well than it is worth doing and what is not.

If you have a feeling that you are stuck, it means that you have come from the top not to the other side, not to that situation and not to those people.

Profile 3/6 is always on the way to the Great Wisdom, but complete this path is not easy. However, your high destination does not allow you to roll off the way. You enjoy the process of determining the direction. Ultimately, people will come to coming. They will ask for advice from you, and you, depicting an ironic smile on my face, say: "So, my friend, why start?"

Relationship with 3/6

Partners with a profile 3/6 damn attractive. They always have among whom to choose, and they know how to do it. They seem wisely not by year. But when it comes to immersing in the chaos of real life, they roby and worry. Therefore, whatever smart, knowledgeable and experienced, they always need a separate personnel in which they can relax from the need to seem. Never forget about it. Do not think that the high hill of the sage itself can replace this space. A man on the hill is too well visible from all sides. Profile 3/6 feels his body as a cell in which it stubbornly pushes reality. They are free to spirit and independent by their nature. And they need them to be perceived exactly in this way. If you try to change something in them, they will simply run away. Most of all, they are afraid of strait shirts. Give them so much space as they need. And you need a lot.

Delivered with due respect and understanding to their personal freedom. In response, you will get reciprocity and devotion. There is no such obstacle that you could not overcome your hand in hand. Over time, your partner is aware that his main mission is not to dream, but to embody dreams to life. A strong union and a reliable ally make this mission performed. Use it to faith in yourself and enjoy the view from the window of the racing car.

Compatibility

Ideal compatibility with the representatives of the profiles 3/6 and 6/3 similar to you; You can also easily interact with 1/3 and 3/5.

Celebrities with profile 3/6: Ben Stiller, Nikola Tesla, John Cusak, Dustin Hoffman

People with a profile 3/6, unlike other six in the design of a person, it is hard to gain wisdom in the first stages of life (traditional for six 18.30 and 50 years old). The character of such people is quite controversy. The six is \u200b\u200bstriving for excellence, refusing to take the slightest disadvantages. At one time, more terrestrial troika is ready to be content with everything in the whole earthly.

Profile Profile Description 3/6

Interesting interaction of the troika and six in this profile - periodic vitations in the clouds and the constant sometimes painful fall to the ground. Inside a person, two starts are struggling: creative and experimental. Troika is extremely important to find earthly foundation and stability, and the six prefers to stay aside. The realization that in all the harmony needs, comes to the profile 3/6 with experience, and most often, already in the third stage in life. But even since 28 you are already beginning to see a decent administrator and a philosopher of life.

It is important for you not only the desire for perfection, but also confidence. In order to become your friend or just a close person, you need to meet the high standard. Just understanding that next to you is a really reliable person, you can trust him. An interesting point: Your trust is very difficult, but the owners of such trophy may not doubt that you are with them forever. In other cases, you can easily say goodbye to people. You understand that this person is just "not yours", crush the former connections and build new in search of perfect.

The sixth line is hard to take life and routine. In relations or work it is difficult to take gray weekdays. Troika seeks to receive experience (any, negative or positive), removing her lessons. And the six does not want to get involved in pre-losing adventures, which "below its dignity." Such a struggle often leads to the fact that you are going on in the waiting position and cannot decide on active actions, dealing with all possible consequences and outcomes.

In order to earn such a necessary sixth line authority, you need to act. It is necessary to learn to take the imperfections of this world. Each new error is only another chance to get experience. Troika should understand that not every attempt ends with success. It often happens that things do not work as we want it. This is normal. A positive look at the life of the six should help the inquisitive troika correctly react to failures and take them as valuable experience, and not as a failure.

In general, the life path of the profile 3/6 in the design of a person is as follows. The first two life stages of the 3rd line "squeeze the bumps": constantly looking for, immersed in experience and tries. Only after 50 years in the game should join the 6th line. Knowledge accumulated on previous life stages should help become a real authority for others. The study of Bodigraph will help to understand the correct strategy for the accumulation of this experience and its use.

During the permanent learning process, it is important to take breaks for the processing of the information received. Give yourself time to think and retire. The main thing is not too far away and often go into yourself. Profile 3/6 (generator, manifesto, projector - no matter) should always be among people. After all, from them you will accumulate your experience, and as a true generator of philosophy, with them then you will share this experience.

Relationship with profile 3/6

In relations with 3/6 pretty hard. But only if they will not learn to be objective at the first stages of life. It is important for them to understand that the unsuccessful experience of relations is just a lesson to be taken and moving on. The biggest problem for them is to adapt to new relationship after painful old.

Fortunately, there are already all the answers on your bodigra. It is very important for you to work out the right strategy of behavior in relationships - in the future you will learn to take every bad experience as the most important. A close-up person has a stable trust rule for you: only 100% confidence in the partner will be the key to long-term living together.

Did you like the profile description 3/6? To understand the rest of the elements of your uniqueness and understanding, how and where you manifest yourself in the best possible analysis of all elements of a person's design card.

Right Angle - Personal Fate

Profile 3 / 6

Martyr - role-playing model

3rd line personality	Conscious adaptation	6th line Design	Unconscious transition
Behavioral feature	Martyr	Nature	Role-playing model
Projected position	Anarchist	A type	Administrator
Limited perspective	Pessimism	Memory	Optimist
Striving for a role	Sustainability	Direction	Objectivity
Strategy of relations		Sexuality	Soul or not
Strategy of protection	Broken and installed ties	Humanity	Trust or not
Emotional resonance	Commitment / rejection	Wave resonance	Sympathy / indifference
Resonance awareness	Parentine / addiction	Frequency resonance	Leadership or not

The cultivation of cereals, in all countries and at all times a special role was assigned. The cereals make up the basis of not only our diet with you, but are the main feed base for animal husbandry. Here in the market of agricultural equipment, grain seeders are in particular demand.

The choice of such equipment is huge, domestic and foreign companies competing among themselves offer both simple, inexpensive aggregates and powerful, multifunctional sowing complexes.

In our narrative, it will be about the grain seeder of SZ-3,6, developed as early as the 70s at the Red Star plant. The aggregate was developed to work with gentle-born and grain crops, as well as the simultaneous introduction of mineral fertilizers in granular form. With the tasks of the SZ-3,6, they coped perfectly than and earned the widest distribution throughout the USSR, and after Russia and the CIS countries.

History of creating a seeder SZ-3,6

The history of the plant "Red Star" began at the end of the 19th century, or rather in 1874, it was then two brothers Englishman Robert and Thomas Elvorota, open in Elisovetgrad (modern Kirovograd) a workshop on assembling horse seeders.

In subsequent years, the workshop turned into one of the largest producers of agricultural equipment in Europe. By the end of 1917, more than 7 thousand people worked at the production. After the October Revolution, in 1919 the plant was nationalized. By 1925, the production of seeders in comparison with 1913 increased 2.5 times. In the late 1920s, the plant's products went to export to the Middle East states.

In 1929, the company mastered the first tractor, the T-1 grain seeder in the country. This model was awarded the gold medal at the international exhibition in Libava. And in 1937 its modification, the T-7 seeder took the "Grand Prix" at the exhibition in Paris.

With the beginning of the Great Patriotic War, the plant was evacuated to the Penza region. There in harsh environments, in dugouts and unfinished squares of the sugar factory began production of ammunition.

After the liberation of Kirovograd in 1944, it began to restore the factory destroyed by 84%. In 1945, 1500 seeds were released, and in the 1950s production level surpassed to military. 45 items of the sowing units were developed and launched in a series, already in the first decade at the end of the war. In 1955, the plant has already produced 78 thousand agricultural machines per year.

Since the late 60s, the plant is significantly expanding, there is a significant re-equipment. This allows the enterprise to update the model range, a more modern grain-wing seeder SZ-3.6 appears.

By the beginning of the 90s, the company has facilities for the release of 100 seeders per year. After the collapse of the USSR, in 1993 there is a transformation in OJSC "Red Star". In 2003, the plant receives the Ukrainian name "Chervona Zirka".

Today it is the largest company in Eastern Europe and the CIS countries specializing in the production of sowing equipment.

Specifications SW-3,6 seeders

The type of aggregation with the tractor - trailed;
Dimensions of dimensional d / w / in - 4300/3700/1650 mm;
Weight - 1380 kg;
Capture width - 3.6 m;
Number of rows - 24 pcs;
Aisle - 150 mm;
Seeding rates for seeds - from 15 to 400 kg / ha;
Fertilizer feed standards - from 25 to 200 kg / ha;
Productivity - 3.2 to 4.3 ha / h / h;
Blowing seeds - from 4 to 8 cm;
Operating speed - from 8 to 12 km / h;
Capacity for seeds / fertilizers - 453/212 DM3.

SW-3,6 seeder device

The main elements of the design of the SZ-3.6 grain seeder are the following nodes and parts:

Rama welded, with a footboard and a knitting device with a tractor;
Two pneumatic, supporting wheels;
Two grainboxes with separate sections for fertilizers and seeds;
24 coil-grooved seeds, and the same number of coil-pin delicate devices;
Rubber seeds, corrugated;
Two-disc courses and finger tiedishches.

Each of the coulters with the help of a hinge is connected by a leash with a frame, or rather with a coupling bar, and through a spring-loaded pressure plug and a rod - with round and square shafts of the lifting mechanism and a mechanism for the overall control of coulters.

The torn shaft has a square cross section, and with a spring-loaded rod and lever connected to the lifting mechanism of coulters operating from the hydraulic cylinder. Sometimes instead of contracted, and more often simultaneously with networks are installed with chains.

The gear chain transmission and the shaft with a disorder and clutches of overtaking transmit the torque from the support wheels on the shafts of the sowing devices. The overtaking clutches transmit rotation from both wheels from both wheels, and to turn off the transmission during the lifting of the coulters, the separator serves.

To control the rotation of the sowing devices, the working depth of the coupling, the connection of the tractor driver and the sowner, to the SZ-3.6 seeder, establish a signaling and control device. There is a signaling device from the tractor electrical system.

Principle of operation of the SZ-3,6 seeder

Granulated mineral fertilizers and seeds, from the corresponding compartments, roll in cameras with sowing devices. When the seeder moves in operating mode with swallowed coulters, coils are sowing, both towomes and grain apparatus, seeds and fertilizer granules are captured and sent to the seed. On corrugated seeds, the sowing material enters the cavity between the discs of coupling, rolls along a special guide and falls into the furrows formed by coupling. Further, the furrows with fertilizers and seeds is close in tanned, and the relief is leveling the loop.

Adjustment of the seeder SZ-3,6

Couplikov discs should be easily spinning by hand. In place where the disks come into contact the gap should not exceed 1.5 mm, the optimal thickness on the sharp disk is 0.5 mm, and the champecification champecus is 6-7 mm wide.

Save rate. Configured before departure in the Field of the Equipped Playground. The seeder is raised by jacks, so that it is in a horizontal position, without distortion. Take a tarpaulin or other material under it. After that, falling asleep with the seeds of about a third, fill the coil, scrolling 2-3 times the wheel.

The next step is made on the wheel mark and turn 14 times. The diluted seeds are weighed, and the result is multiplied by 100, the resulting work is the actual seed rate on the area in 1 hectare.

Operation of seeder SZ-3,6

To determine the advantages and disadvantages in the work of the SZ-3.6 grain seeder, we as always appeal to farmers, people who in practice are familiar with this aggregate.

We exploit my seeder for more than ten years. The load on it in my farm is not large, only about 30 and hectares. Collected on spare parts from scrap metal which by that time was already strongly used. For all the time from breakdowns, only a change in the top three bearings on the couch. Excellent apparatus for a small farm, for large areas of course I recommend that neither happened and in modern.
Not bad technique. If you have trouble with finances, then you will not think better, especially since you can find a bad used option, the proposals are enough and prices do not bite. By itself, the device is worthy, reliable, breaking in fact not what and is repaired on the knee in two bills.

Based on the set of reviews, people directly exploiting this technique, it is safe to say that the positive about SZ-3.6 speaks more than more.

Of the main advantages, such qualities are noted as: ease of maintenance, design reliability and maintainability, the possibility of self-adjustment without attracting specialists, the availability of components and their small price, as the price of the seeder itself.

The disadvantages speak only that the model is outdated and inferior in terms of performance and efficiency of more modern models.

Purchase of SZ-3,6 seeder: Features of choice

By itself, the seeder is very reliable, and to handle it to try. Therefore, when this technique is selected in the secondary market, it is necessary to pay attention primarily on the mechanical damage in the design of the seeder. They will easily find anyone, not even disassembled in the subject of a person with a careful visual inspection.

We also pay attention to rotating and rubbing parts susceptible to wear, such as bearings and coupling discs.

Prices for an old used seeder of SZ-3,6 in working condition starts from about 50 thousand rubles. Then the price increases depending on the year and the technical condition.

It is used when seeding: wheat, rye, barley, oats and when crouching pea, beans, soybeans, lentils, lupine and other cereals with simultaneous enrolling in rows of granulated mineral fertilizers.

The seeder of C3-3,6A can be equipped with: two-sized coulters (with ordinary sowing), one-piece coulters and tanned

when feeding winter fruits, vaporous two-paced coulters and illuminated (for seeding flax seeds), two-way two-stroke coulters (for work on soils, clogged by stones), two-way single-line coulters with thickened discs (when sowing on peatlaps).

The seeder in single-layer units is aggregated with tractors: T-40; T-40A; T-50; T-50A; MTZ-50 / 52L; MTZ-80; MTZ-82 / 82L; YUMZ-6L / 6M; T-80A; T-10Av. In wide-circulation multi-mileage units using hydraulic coupling SP-11 A; SP-16A is aggregated with tractors DT-75; T-150K; T-4A and K-700.

A distinctive feature of the seeder C3-3,6A from the SZ-3.6 seeder is the following.

In the seeder of the SZ-3,6 A, individual finger-type plotters are introduced: the welded design of the mounting axes of the support-drive wheels, small-sized gearbox (transmission changes); The design changed: a grain bunker (hard bottom), a lifting shaft and coupling shaft; Protective grids in grain and towel boxes are supplied; Used: a trailer with a central folding unit, a device for setting a seeder to a seeding rate without lifting the support wheels, non-ferrous coulter-rippers along the tractor wheels trail, a device for overlapping the sowing devices for the formation of a technological gauge; The electronic system of the UK group control over the operation of the sowing devices and the level of seeds and tows in the boxes is applied.

The seeder includes: frame, grainboxes 3 (Fig. 1) and tool 11, gentle with trailer 1, unified control system (UK), gearbox, wheels 10, footboard 4, tanning 5 and 7, stand 6, Cabs 8, backgrowor.

Fig. 1. Scheme of the device of the seeder C3-3,6A:
1 - Snign; 2 - hydraulic cylinder; 3 - grain drawer; 4 - footboard; 5 - chain tartage; 6 - Stand; 7 - Zagortach; 8 - couch; 9 - cuff; 10 - Wheel; 11 - Toolbox; 12 - Stand SHEE.

The frame of the seeders is attached: a grainbox 3, two pneumatic wheels 10, and the frame of the frame is equipped with coulters 8. Snip 1 is attached to the front of the frame with a trailer and stand 12. Sound lift shafts are attached to the frames of the frame. Hydraulic cylinder 2, located on the control below, lifts and lowering coulters 8 and tanning 7.
With the help of the counterpart shaft and two boxes of change of transmission (PPC) are driven by shafts of cereal and towpers. The counterface shaft is equipped with a overtaking clutch, which allows you to move these shafts from both wheels at the same time. On the back of the frame mounted a footboard 4.

The working process of the seeder is next. The seeds in the grain branches of the box 3 and fertilizer in its tank branch of the samoter are submitted to the receiving chambers of the sowing devices. During the operation of the seeder, seeds and fertilizers are taken by rotating coils of grain and towful sowing devices, which supply them to the funnels of the seedworks. The seeds are served seeds and fertilizers to coulters, of which, rolling in directions, they fall on the bottom of the furrow, created in the soil by coulters. The backfilling of seeds and fertilizers to the soil is carried out with the help of a natural squeezing of the soil from the walls of the furrow, and its seal is carried out by tanning, the following coupling.

The grain drawer consists of two compartments: front (seed) and rear for fertilizers. From above, the grain drawer is equipped with sieves that protect the seed material from penetration of foreign objects. The grain drawer has four covers equipped with spring latches for fixing them in an open and closed positions.

Cereal coil sowing devices are attached to the bottom of the box. The devices have group fire and the same adjustment of the seeding rate. The grain sowing apparatus is equipped with an adjustable valve that promotes small seeds, as well as large seeds. This valve is regulated by pressing or weakening the springs with a nut. Group adjustment of the position of the valves and the fermentation of the devices is carried out using a lever.

The coil pins for seeding granular mineral fertilizers with group fire is attached to the rear wall of the drawer. Fakeing is carried out by a lever rotating the shaft with valves attached to it.

When seeding seeds without fertilizing, both branches are filled with seeds. At the same time, the windows of the delicate devices overlap the valves and pull the dampers.

Couch. The seeder can be equipped with: two-disc, vapor, two-disc ultrasonic and single-sized coulters.

A two-digish ordinary coulter with an angle of convergence of 10 ° disks includes a cast-iron case 4 (Fig. 2, a), two discs 1 with the hubs 2 with the suited bearings protected from the axial displacement of spring rings.

The hub 2 with a pressed cuff and sleeve holds lubricant in the bearing cavity and protects dust from penetration into it. Disks on the axes are fixed with nuts. From sticking the soil, the disks of the couch protect the personnel.

Two-disc ordinary coulter differs from the couch by two-discovered thickened discs and the design of the chickening.

The narrow-armed two-way coulter has an angle of convergence of 18 ° and is installed both on the front and rear rows. The axes located in the couch housing are attached wheels 1 (Fig. 2, b). The discs are connected to the hub 13 rivets 12. Bearings 11 are pressed into the hub and fixed with a ring 10. From penetration into the bearing of dust and dirt, the hub 13 is protected by cuff 9 and the reflector installed on the axis.

The front and rear one-piece coulters have a flat shape of the disk and mounted so that their plane of rotation with the direction of motion is an angle of 8 °, and with a vertical of 20 °. The rear and front coulters are located on the seeder pairly. The left coulters are mounted on the left half of the seeder, and the right - on its right half.

Coupling disc 1 (Fig. 2, c) is attached to the hub. Bearings 11 are clicked in the hub, which from the axial offset hold rings 10.

A distinctive feature of the collected front coulter from the assembled rear coulter is the angle of inclination of the bracket 14 to the horizontal. In the front coulter, the mentioned angle is 31 °, and in the rear 19 °, therefore the distance from the vertex of the funnel 16 to the outer end of the bracket 14 in the front coulter is less, and in the rear coulter it is greater.

Fig. 2. Sounds:
a - twodiscable ordinary; b - twodisclated narrow-armed; in - one-piece; g - varachnaya; 1 - disk; 2 -Capice; 3 - gasket; 4 - body; 5 - guide; 6 - funnel; 7-reflector; 8 - sleeve; 9 - MANAGE; 10 - Ring; 11 - Bearing; 12 - rivet; 13 - hub; 14, 15, 18 - brackets; 16 - funnel; 17 - clever; 18 - Grocery.

The coupling of the Narafniki has a bracket 18 (Fig. 2, d) and a fetoid pressure 19. Install the couch along the wheel trail. Front and rear coulters are not interchangeable. The unified system for controlling the workflow of the seeder includes seeding sensors and the level of seeds, a switchgear and a remote control. Severe sensors fix the movement of seeds dropped into a seed-sowing coil and fed light and sound signals into the control panel of the process of violation of the process. A signal is served when the level of seeds or fertilizers in the box is below the location of the sensors. The work of the sensor is based on a photoelectric principle.

Preparation for work.

Preparation for work begins with checking the technical condition of the working bodies and mechanisms of the seeders, the coulters are placed on a given width. Interpretation of coupling is carried out on a marking board. This board is laid between the ranks of coupling signs up and so that the middle of the board coincides with the longitudinal axis of the seeder. The board is strengthened by pegs. Install the coulters against the corresponding signs designated on the board. You can pre-arrange and fix the coulters on the bar, and then, with the help of a marking board, set them finally.

On the roller adjustment, the rolls are placed so that the pressure rods are placed the vertically axial line of the coulters, after which the nuts fastening the leashes towards the bruus are tightened.

In the absence of an installation board, the coulters on the necessary width of the rods are placed using a roulette. To do this, the extreme coulters move on Brusa to failure and measure the distance between their average lines. This distance is a useful length of the coupling bar. To divide this length into the required length of the rod and adding to the result unit, the number of coulters, which can be installed on the bar are obtained.

The adjustment of the grain sowing devices begin with checking the campus of cereals with the inner cavity of the sockets. In the presence of devices, the coils of which are not embarrassed with the cavity of the sockets, they release the locking screws of the coils to the shaft and set the coils so that the ends of the coils are silent with the inner cavity of the outlet.

Produce checking the installation of valves of sowing devices. To seed seeds of grain crops, the gap between the planes of the valves and the lower edges of the couplings in all devices should not exceed 2 mm. The valve adjustment is carried out by pressing or attenuating the spring from the required valve with a bolt.

When sowing seeds of leguminous crops, a gap between the valve plane and the clutch edge of 8-10 mm are installed. Such a gap will prevent seeds from crushing. Install the gap of fermentation levers.

Check the installation of the transmission change box (PPC).

The gearbox, together with interchangeable asterisks, allows you to get sixteen gear ratios, including ten grain and six gears on trees of towpers. CPC is different from one another only the arrangement of the ends of the entrance shafts.

The transfer ratio is chosen so that the seeding rate corresponds to its minimal value, but at the maximum length of the working part of the coils. This will allow the most uniform seed survey and eliminate their crushing in the devices. The length of the working part of the coils is determined depending on the received transfer ratio, pre-determining it in the diagram.

Example. It is necessary to determine the value of the opening of coils and the transfer ratio at the rate of wheat seeding 80 kg / ha.

The vertical axis find the rate of 80 kg / ha and spend a horizontal line, which cross the inclined line "Wheat". Having found the intersection points, we will see that this rule corresponds to the transfer ratio of 0.604 and 0.198. From the intersection points, lowering the perpendicular to the horizontal axis, we obtain the length of the working part of the coils equal to 10 and 31 mm.

Considering that the seeds of one culture, such as wheat, have different characteristics of the diagram given to approximate the seeding rate.

To clarify the seeding rate, carry out trial checks in place. The seeder is raised by jacks so that the supporting wheels are rotating, not in contact with the ground, and the grain drawer took a horizontal position. The seed box of the drawer is filled with grain, and the lever of the one half of the seeders put on the division of the scale, approximately equal to the sowing rate. The seeds are equipped with bags.

It is customary to see the seeding rate on 1/50 hectare. Therefore, the wheel of this seeder is checked 14 times along the seed drill with a frequency of 15-20 minutes.

The number of seeds by apparatus (in kg) for one wheelchair is calculated using the formula A \u003d 3,14BDQ / 10,000, where B is the width of the seeder capture, m; D - wheel diameter, mm; Q is a seeding rate, kg / ha.

The number of seeds exiled each half-seeder (kg) for 14 wheel scrolling will be: a, \u003d 3.14 x 14dbq / 100002.

The seed seeds are collected, weighed and the result is merged with the calculated one. With their difference, the lever changes the length of the working part of the coils and repeat the scrolling again. End the check when the actual seeding deviation of seedlings will be within 3% of the specified norm. Having received this result, the regulator lever is fixed with a nut.

After checking the seeds of seeds of one half of the seeder, make a template of the working length of the coil. This template is used in the field when checking the seeding rate. It is checked in the field during the first passages of the unit.

The number of seeds, kg, which should be sown, is counted according to the formula: A2 \u003d LBQ / 10,000, where L is the length of the gon, m.

On 1/3 of the bottom fill the seed box with seeds, align them and spend the line along the walls. Then they fill in the box with seeds, the number of which is calculated according to the above formula. Then two gons pass and, having completed them, determine the correctness of the installation of the seed drill to the seeding rate, while focusing on the test line. With the difference in the actual seeding with the calculated, sowing devices regulate and check again.

The adjustment of the towpers starts with tick apparatus tacking. For this, the lever is transferred to the extreme top position. In this case, the valves of all tank devices should come into contact with the pins of coils, weaken the lock bolts and put the valves so that they come into contact with the coils. Then, turning the lever, set the gap between the pins and valves of 8-10 mm for fertilizers of normal humidity, and for fertilizers of high humidity valves are lowered below.

Fertilizers even one species differ in humidity, volume weight, etc. Considering this, the installation of a given seeding rate of fertilizers is carried out under a test crust. It is made like the grain apparatus described when checking.

Seeder trailed grain-tonic press SPP-3,6A is used in a series of seed seeds of grain, fine and medium-sided bean crops with simultaneous pushing into the soil of granulated mineral fertilizers and tightening the soil after sowing.

The seeder in single-layer units is aggregated with tractors: T-40; T-40A; T-50; T-50A; MTZ-50 / 52L; MTZ-80; MTZ-82 / 82L; YUMZ-6L / 6M; T-80A; T-100 AB. In wide-circulation multi-fuzzy units with hydraulic coupling joints; SP-16A is aggregated with tractors DT-75; T-150; T-4A and K-700.

A distinctive feature of the SZP-3,6A seeder from the SZP-3.6 seeder is the following. In the SZP-3,6A seeder, individual finger-type ties are introduced; Applied: welded design axes of support-drive wheels, small gearbox; The design changed: a grain bunker (hard bottom), a lifting shaft and coupling shaft; Protective grids in grain and towel boxes are supplied; Used: a trailer device with a central folding unit, a device for setting a seeder to a seeding rate without lifting the support wheels, the durable coupling rippers along the tractor wheel trail, the device overlapping the sowing devices for the formation of a technological gauge; The electronic system of the UK group control over the operation of the sowing devices and the level of seeds and tows in the boxes is applied.

Seeder SZ-3,6 is a universal grainted trailed seeder, the main purpose for row seed seeds of grain crops (barley, oats, wheat, rye, etc.), legumes (peas, beans) and some cereal crops (buckwheat, millet) with Simultaneous introduction of mineral or other fertilizers. SW-3,6 A seeder is a modification of the base model of a grain seeder. It is best used in a single-row version on those fields whose area does not exceed 40 hectares.

Modifications of the seeder SZ-3,6A

On the basis of the SZ-3,6A seeder, several modifications were developed for sowing crops or mixtures thereof:

SZ-3,6A-01 - for subside and frozen feeding without prior processing of the soil, equipped with one-piece coulters;
SZ-3,6A-02 - for sowing flax, equipped with a vaporous two-stroke coulters and illuminated, can be used for sowing seeds of grain and leguminous crops from the depth of seed seeds from 10 to 30 mm;
SZ-3,6A-03 - for sowing on the lungs soils, is completed with non-varable coulters for light soils and illuminated;

Device of the grain seeder sz 3.6

Check out these articles

The unit is equipped with a device overlapping part of grain sowing devices, which helps the formation of technological track when choosing intensive cultivation technologies for agricultural crops. In addition to the seeder in agran, the economy is used.

The kit includes different coulters, as well as the sets of close-up working bodies, which makes it possible to ensure the transformation from one execution to another in the conditions of agricultural economy.

SPECIFICATIONS OF SW 3,6